- Koha - lists.katipo.co.nz

Re: [Koha] unable to run apache after upgrade from 3.0 to 3.2
by Yatheesh Y 04 Jan '11

04 Jan '11

this is file apache error Based upon the NCSA server configuration files originally by Rob McCool. # # This is the main Apache server configuration file. It contains the # configuration directives that give the server its instructions. # See http://httpd.apache.org/docs/2.2/ for detailed information about # the directives. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # The configuration directives are grouped into three basic sections: # 1. Directives that control the operation of the Apache server process as a # whole (the 'global environment'). # 2. Directives that define the parameters of the 'main' or 'default' server, # which responds to requests that aren't handled by a virtual host. # These directives also provide default values for the settings # of all virtual hosts. # 3. Settings for virtual hosts, which allow Web requests to be sent to # different IP addresses or hostnames and have them handled by the # same Apache server process. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "/var/log/apache2/foo.log" # with ServerRoot set to "" will be interpreted by the # server as "//var/log/apache2/foo.log". # ### Section 1: Global Environment # # The directives in this section affect the overall operation of Apache, # such as the number of concurrent requests it can handle or where it # can find its configuration files. # # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # NOTE! If you intend to place this on an NFS (or otherwise network) # mounted filesystem then please read the LockFile documentation (available # at <URL:http://httpd.apache.org/docs-2.1/mod/mpm_common.html#lockfile>); # you will save yourself a lot of trouble. # # Do NOT add a slash at the end of the directory path. # ServerRoot "/etc/apache2" # # The accept serialization lock file MUST BE STORED ON A LOCAL DISK. # #<IfModule !mpm_winnt.c> #<IfModule !mpm_netware.c> LockFile /var/lock/apache2/accept.lock #</IfModule> #</IfModule> # # PidFile: The file in which the server should record its process # identification number when it starts. # This needs to be set in /etc/apache2/envvars # PidFile ${APACHE_PID_FILE} # # Timeout: The number of seconds before receives and sends time out. # Timeout 300 # # KeepAlive: Whether or not to allow persistent connections (more than # one request per connection). Set to "Off" to deactivate. # KeepAlive On # # MaxKeepAliveRequests: The maximum number of requests to allow # during a persistent connection. Set to 0 to allow an unlimited amount. # We recommend you leave this number high, for maximum performance. # MaxKeepAliveRequests 100 # # KeepAliveTimeout: Number of seconds to wait for the next request from the # same client on the same connection. # KeepAliveTimeout 15 ## ## Server-Pool Size Regulation (MPM specific) ## # prefork MPM # StartServers: number of server processes to start # MinSpareServers: minimum number of server processes which are kept spare # MaxSpareServers: maximum number of server processes which are kept spare # MaxClients: maximum number of server processes allowed to start # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # worker MPM # StartServers: initial number of server processes to start # MaxClients: maximum number of simultaneous client connections # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadsPerChild: constant number of worker threads in each server process # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_worker_module> StartServers 2 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # event MPM # StartServers: initial number of server processes to start # MaxClients: maximum number of simultaneous client connections # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadsPerChild: constant number of worker threads in each server process # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_event_module> StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> # These need to be set in /etc/apache2/envvars User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP} # # AccessFileName: The name of the file to look for in each directory # for additional configuration directives. See also the AllowOverride # directive. # AccessFileName .htaccess # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <Files ~ "^\.ht"> Order allow,deny Deny from all </Files> # # DefaultType is the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain # # HostnameLookups: Log the names of clients or just their IP addresses # e.g., www.apache.org (on) or 204.62.129.132 (off). # The default is off because it'd be overall better for the net if people # had to knowingly turn this feature on, since enabling it means that # each client request will result in AT LEAST one lookup request to the # nameserver. # HostnameLookups Off # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog /var/log/apache2/error.log # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn On Mon, Jan 3, 2011 at 6:51 PM, Randall Rowe <r.rowe(a)lincolnlibraries.org>wrote: > It means that the file /etc/apache2/sites-enabled/koha has an error. > There is a closing </VirtualHost> without an opening <VirtualHost>. > Check the file and see if you can figure out the problem or post it and > we'll see what went wrong. > > Randy Rowe > Lincoln City Libraries I.T. > > -----Original Message----- > From: "Yatheesh Y" <yatheeshb(a)gmail.com> > Sent 1/3/2011 5:19:10 AM > To: Koha(a)lists.katipo.co.nz > Subject: [Koha] unable to run apache after upgrade from 3.0 to 3.2 > > after upgrading unable to run apache it gives following error > > what is this? > > > Restarting web server > apache2 apache2: Syntax error > on line 265 of /etc/apache2/apache2.conf: Syntax error on line 95 of > /etc/apache2/sites-enabled/koha: </VirtualHost> without matching > <VirtualHost> section > > > -- > ---------------------------- > Y.Yatheesh babu > Librarian > Shri Shakti College of Hotel Management > Venus Plaza Begumpet > Hyderabad-500 016 > 09966178388 > > _______________________________________________ > Koha mailing list http://koha-community.orgKoha@lists.katipo.co.nzhttp://lists.katipo.co.nz/m… > > -- ---------------------------- Y.Yatheesh babu Librarian Shri Shakti College of Hotel Management Venus Plaza Begumpet Hyderabad-500 016 09966178388

2 1

Re: [Koha] Editing library code
by Paul 03 Jan '11

03 Jan '11

At 09:23 AM 1/4/2011 +1300, you wrote: >On 4 January 2011 09:16, Paul <paul.a(a)aandc.org> wrote: > > Happy new year to all. > > > > Q: How do I edit our "Library Code" (koha-admin / branches / modify > > library), please? It does not appear in an editable text-box. > > > > [we originally - and erroneously - entered our code with the "Canadian > > prefix" Ca, as CaOPIACS, and now need only OPIACS.] > > >Hi Paul > >Happy new year, the short answer is, you can't. Not in the web >interface. Because to do so means updating a whole pile of things, the >borrowers table, items table, accountlines, reserves, the marc in >biblioitems etc. > >Does it actually matter, the description is displayed in most places ... ? Chris (and Jane), Thanks for replying, but not what we are looking for. The main reason to change is that a search at Library and Archives Canada <http://www.collectionscanada.gc.ca/illcandir-bin/illsear/l=0/c=1> relies on "OPIACS" and anyone searching for "CaOPIACS" cannot find us in the ILL system; also OPIACS is our "authority." What we have done is to set up a second library called OPIACS (totally identical to the first CaOPIACS), but now, despite being prompted to delete the first one, it just will not delete. So the question is - should I just grep CaOPIACS and replace wherever found, or is there a more elegant and reliable (non-gui) method? We do not care at this point about "borrowers table, items table, accountlines, reserves, etc" because we have reentered all our holdings (with OPIACS as required in the data) in the second (valid) library after purging all biblio and item records in the first, and so far have not entered any patron, budget, etc data -- so there is nothing to lose. I am sure we'll be purging again; we're in "pre-production mode" and refining our MarcEdit templates and mappings, and even 20,000 books only take a couple of minutes to delete and reload (plus zebra cron job.) Many thanks - Paul

2 1

Problem uploading MARC records
by Darla Grediagin 03 Jan '11

03 Jan '11

Good afternoon all, I have been getting the following message when I upload records to stage for import "SyntaxError: missing ; before statement" I have clean MARC records that I have used MARC edit to swap fields in. I have used the MARC edit feature to check for mistakes. If you have seen this statement, please let me know how you solved your problem. I am uploading records to a new install of Koha 3.00.06.010. Thanks in advance, -- Darla Grediagin District Librarian Bering Strait School District Unalakleet, Alaska Web Address : http://bssdonline.org/course/view.php?id=51 Blog: http://aklibrarian1.edublogs.org/ OPAC: http://opac.bssd.org:8181/cgi-bin/koha/opac-search.pl

1 0

Editing library code
by Paul 03 Jan '11

03 Jan '11

Happy new year to all. Q: How do I edit our "Library Code" (koha-admin / branches / modify library), please? It does not appear in an editable text-box. [we originally - and erroneously - entered our code with the "Canadian prefix" Ca, as CaOPIACS, and now need only OPIACS.] Thanks - Paul tired old sys-admin

3 2

Re: [Koha] Cannot save edited patron info in koha (but I can in mysql)
by Chris Cormack 03 Jan '11

03 Jan '11

Hi Marty As usual we also need to the version of Koha you are running, I can confirm editing patrons works fine in 3.2.2 for me. Also check your error logs if it isn't saving there is a good chance a database error is being thrown this will be in the error log. Chris On 27 Dec 2010 08:08, "Marty" <ontariowolf64(a)yahoo.com> wrote: This might be a permissions thing, but I am not sure. When I edit a patron's information I can change all fields I need to, but after the information has been 'saved' nothing has changed (When I am logged in as a superlibrarian) I can play in mysql and do a 'UPDATE borrowers SET city = 'Keswick' WHERE borrowernumber = 1234; This results in the changes info showing up in Koha, but I need this working in Koha, so the librarians can change patron info. As usual, any ideas are appreciated. Marty _______________________________________________ Koha mailing list http://koha-community.org Koha(a)lists.katipo.co.nz http://lists.katipo.co.nz/mailman/listinfo/koha

3 8

Reminder: General IRC meeting Wednesday, January 5, 22:00 UTC
by Wagner, Jane 03 Jan '11

03 Jan '11

(Since I got tagged with sending out the reminder message during last month's meeting.) There is a general IRC meeting on Wednesday, January 5, 2011, at 22:00 UTC. See http://wiki.koha-community.org/wiki/General_IRC_Meeting,_5_January_2011 for meeting agenda and a link to convert UTC to your local time. Jane Wagner Senior Project Manager LibLime, a division of PTFS Content Management and Library Solutions 6400 Goldsboro Road, Suite 200 Bethesda, MD 20817 (301) 654-8088 x 151 jwagner(a)liblime.com

1 0

Re: [Koha] LDAP authentication
by Scott Owen 03 Jan '11

03 Jan '11

Vitor, Here is my working LDAP config. section Differences that jump out at me: I use the IP rather than the FQDN for the LDAP server. No auth_by_bind section at all.....and my LDAP auth works fine. Can you access your LDAP directory with other LDAP tools? (Softerra LDAP browser?) ************************************** <useldapserver>1</useldapserver>  <ldapserver id="ldapserver" listenref="ldapserver"> <hostname>10.1.1.7</hostname> <base>T=********</base> <user>*************</user>  <pass>*************</pass>  <replicate>1</replicate>  <update>0</update>  <mapping>  <firstname is="givenname" ></firstname> <surname is="sn" ></surname> <address is="" >Alma Public Schools</address> <city is="" >Alma</city> <zipcode is="" >48801</zipcode> <branchcode is="" >PINE</branchcode> <userid is="cn" ></userid> <password is="" ></password> <email is="mail" ></email> <categorycode is="" >PT</categorycode> <phone is="telephonenumber"></phone> </mapping> </ldapserver> ************************************************** >>> Vitor Fernandes<vitorfernandes87(a)gmail.com> 12/28/2010 10:11 AM >>> Hi there. I want to use LDAP authentication on my Koha (3.2.2). There is any tutorial to do this? Now I've added this block to my koha-conf.xml: <useldapserver>1</useldapserver> <ldapserver id="ldapserver" listenref="ldapserver"> <hostname>*******</hostname> <base>*********</base> <user>*******</user> <pass>*******</pass> <replicate>0</replicate> <update>0</update> <auth_by_bind>1</auth_by_bind> <mapping> <firstname is="givenName" ></firstname> <surname is="sn" ></surname> <userid is="userPrincipalName"></userid> <email is="mail"></email> </mapping> </ldapserver> I don't want to replicate neither update users in Koha. LDAP will be only used to authentication. But i'm having this error: "Can't call method "bind" on an undefined value at /usr/share/koha/lib/C4/Auth_with_ldap.pm line 122". The hostname of LDAP is correct... I've checked Auth_with_ldap.pm and the problem is that $db variable (Net::LDAP->new(hostname)) is empty. Any solution? Thanks for your time. Regards. Vitor Fernandes _______________________________________________ Koha mailing list http://koha-community.org Koha(a)lists.katipo.co.nz http://lists.katipo.co.nz/mailman/listinfo/koha

3 2

z39.50 search not working
by Caitlin McGurk 03 Jan '11

03 Jan '11

Hi All, Our library is having a mass volunteer-based cataloging session today to get all of our collection into our new Koha database, and for some reason the Z39.50 Search is not working. This is nearly an emergency, as I have a staff of volunteers waiting to help! Eeek. It was working fine for the past month, but now when I click on it nothing happens. Suggestions?? Thank you! -- Caitlin McGurk *Librarian The Schulz Library The Center for Cartoon Studies <http://www.cartoonstudies.org> McGurk(a)cartoonstudies.org*

2 3

Problem with prediction pattern in Serials
by Peel Lisa 03 Jan '11

03 Jan '11

Hello And a belated Happy New Year ! I have a very small problem but one which I cannot find an easy resolution for. I set up most of our serials at the end of last year -several of my serials should now roll over into the next year or volume number (for example, vol 194, no 1 or 2011/1). However, though they are rolling back to number 1 they are not rolling forward by 1 as far as the volume number and/or year is concerned. One example is the pattern for a serial using the year/number pattern Everything looks fine on the predication pattern - when I go into the advanced pattern for X (volume or year) the pattern is: Add 1 Once every 12 When more than 9999999 Inner counter 2 Set back to 0 Last value 2010 Should the fact that the first issues checked in was actually 2010/10 have an impact? I am wondering if the 'once every' does not mean issue number (Y) but the actual number of issues which have to be checked in. If this is the case, would I then have to edit the pattern again as I would have to set it to 2 to get it to roll over to 2011, and then change it back to 12 so it would not go to 2012 in March! Golly, I hope this makes some sense to someone! Any help would be really appreciated! Regards Lisa Lisa Peel Librarian César Ritz Colleges Switzerland 1897 Le Bouveret - Switzerland Tel: +41 24 482 82 82 Fax: +41 24 482 82 80 E-mail: lisa.peel(a)ritz.edu<mailto:hortense.hofer@ritz.edu> http://www.ritz.edu<http://www.ritz.edu/> - http://www.culinaryarts.ch<http://www.culinaryarts.ch/> 25 Year "César Ritz" Colleges Switzerland

2 2

Re: [Koha] unable to run apache after upgrade from 3.0 to 3.2
by Randall Rowe 03 Jan '11

03 Jan '11

It means that the file /etc/apache2/sites-enabled/koha has an error. There is a closing </VirtualHost> without an opening <VirtualHost>. Check the file and see if you can figure out the problem or post it and we'll see what went wrong. Randy Rowe Lincoln City Libraries I.T. -----Original Message----- From: "Yatheesh Y" <yatheeshb(a)gmail.com> Sent 1/3/2011 5:19:10 AM To: Koha(a)lists.katipo.co.nz Subject: [Koha] unable to run apache after upgrade from 3.0 to 3.2 after upgrading unable to run apache it gives following error what is this? Restarting web server apache2 apache2: Syntax error on line 265 of /etc/apache2/apache2.conf: Syntax error on line 95 of /etc/apache2/sites-enabled/koha: </VirtualHost> without matching <VirtualHost> section -- ---------------------------- Y.Yatheesh babu Librarian Shri Shakti College of Hotel Management Venus Plaza Begumpet Hyderabad-500 016 09966178388 _______________________________________________ Koha mailing list http://koha-community.org Koha(a)lists.katipo.co.nz http://lists.katipo.co.nz/mailman/listinfo/koha

1 0