- Koha - lists.katipo.co.nz

Book Cover
by Ma. Victoria H. Silva-Manuel 07 Dec '17

07 Dec '17

hi. is there a way to show only one book cover per record? i enable amazon and local cover images and in my opac search i can see the cover from amazon and "no cover image available" hope someone can help. thanks. -- Ma. Victoria H. Silva-Manuel Registered Librarian, 3892

2 1

Relais D2D as an ILL product
by Jason Palmer 07 Dec '17

07 Dec '17

Hi, everybody. One of our members in our academic library consortium is moving off of Koha to their own ILS in early 2018. We are thinking about purchasing Relais D2D to maintain unmediated consortial borrowing between our Koha and their Alma. We have no consortium-wide ILL product, and our board is wondering if Relais D2D can also be used for all ILL and not just as a Koha/Alma bridge. Most of our libraries user OCLC WorldShare; one uses ILLiad. Do any of you use Relais D2D? If so, is it for all your ILL, or just within your consortium? Thanks so much! Jason Palmer SWITCH Library Consortium 3401 South 39th Street FO 237A Milwaukee, WI 53234 414-382-6711

1 0

Importing WINISIS data into Koha
by Alex Shepherd 06 Dec '17

06 Dec '17

Hi Team, I’ve been asked to migrate some library data currently in WINISIS into Koha and just wondered if anyone has been down this path recently and can share any advice or tools or recipe etc they used? I’ve previously done one conversion from the XML file that WINISIS can export to, into MARC records via perl + MARC library, for a non-Koha system a number of years ago, but am hoping there might be some better alternatives now… ;) Any help or advice would be much appreciated. Regards Alex Shepherd p: +64-7-829 4441 m: +64-21-777764 e: kiwi64ajs(a)gmail.com

4 3

Non-standard Classification
by RobertA 06 Dec '17

06 Dec '17

Hi, I'm setting up Koha for a new specialist Buddhist library with many unusual and rare texts in various languages. A Professor of Buddhist Studies has designed a bespoke classification system to appear on the spine of each book and other resources to organise the collection. The classification system follows a system A.1.1.1 (ie Letter.digit.digit.digit). I'm completely new to Koha. I've searched the list and looked at the classification source guidance in the Wiki etc but can't see how to create this classification system. I need to know: 1- is this classification system is creatable in Koha? and 2 - where I can find out how to create it? Many thanks in anticipation of your taking the time to help with this! Kind regards Robert -- Sent from: http://koha.1045719.n5.nabble.com/Koha-general-f3047918.html

1 0

Re: [Koha] Configuring smtp mail server to work with Koha
by Paul Hoffman 06 Dec '17

06 Dec '17

Javed, (Please reply to my message rather than starting a new thread.) Could you please repeat this, but with a somewhat different sequence of commands? c C4::Letters::SendQueuedMessages c sendmail x \%mailcfg $mailcfg{'debug'} = 2 r Then post all of the output to the list. Paul. On Wed, Dec 06, 2017 at 11:47:18PM +0500, Javed Sahil wrote: > Hi Paul, > > here are your required results. > > -- javed@iolhost:~$ koha-shell library > [sudo] password for javed: > library-koha@iolhost:~$ cd /usr/share/koha/bin/cronjobs > library-koha@iolhost:/usr/share/koha/bin/cronjobs$ perl -d > process_message_queue.pl > > Loading DB routines from perl5db.pl version 1.49 > Editor support available. > > Enter h or 'h h' for help, or 'man perldebug' for more help. > > main::(process_message_queue.pl:32): > 32: my $username = undef; > DB<1> c C4::Letters::sendqueuedmessages > Subroutine C4::Letters::sendqueuedmessages not found. > DB<2> c C4::Letters::SendQueuedMessages > C4::Letters::SendQueuedMessages(/usr/share/koha/lib/C4/Letters.pm:1032): > 1032: my $params = shift; > DB<3> c sendmail > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:170): > 170: $error = ''; > DB<4> t > Trace = on > DB<4> r > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:171): > 171: $log = "Mail::Sendmail v. $VERSION - " . scalar(localtime()) > . "\n"; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:173): > 173: my $CRLF = "\015\012"; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:174): > 174: local $/ = $CRLF; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:175): > 175: local $\ = ''; # to protect us from outside settings > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:176): > 176: local $_; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:178): > 178: my (%mail, $k, > 179: $smtp, $server, $port, $connected, $localhost, > 180: $fromaddr, $recip, @recipients, $to, $header, > 181: %esmtp, @wanted_methods, > 182: ); > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:232): > 232: foreach $k (keys %mailcfg) { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:233): > 233: if ($k =~ /[A-Z]/) { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:233): > 233: if ($k =~ /[A-Z]/) { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:233): > 233: if ($k =~ /[A-Z]/) { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:233): > 233: if ($k =~ /[A-Z]/) { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:233): > 233: if ($k =~ /[A-Z]/) { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:233): > 233: if ($k =~ /[A-Z]/) { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:233): > 233: if ($k =~ /[A-Z]/) { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:233): > 233: if ($k =~ /[A-Z]/) { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:239): > 239: while (@_) { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:240): > 240: $k = shift @_; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:241): > 241: if (!$k and $^W) { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:246): > 246: $k = ucfirst lc($k); > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:248): > 248: $k =~ s/\s*:\s*$//o; # kill colon (and possible spaces) at > end, we add it later. > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:251): > 251: $k =~ s/-(.)/"-" . uc($1)/ge; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:252): > 252: $mail{$k} = shift @_; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:253): > 253: if ($k !~ /^(Message|Body|Text)$/i) { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:255): > 255: $mail{$k} =~ s/\015\012?/\012/go; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:256): > 256: $mail{$k} =~ s/\012/$CRLF/go; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:240): > 240: $k = shift @_; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:241): > 241: if (!$k and $^W) { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:246): > 246: $k = ucfirst lc($k); > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:248): > 248: $k =~ s/\s*:\s*$//o; # kill colon (and possible spaces) at > end, we add it later. > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:251): > 251: $k =~ s/-(.)/"-" . uc($1)/ge; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:252): > 252: $mail{$k} = shift @_; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:253): > 253: if ($k !~ /^(Message|Body|Text)$/i) { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:255): > 255: $mail{$k} =~ s/\015\012?/\012/go; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:256): > 256: $mail{$k} =~ s/\012/$CRLF/go; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:240): > 240: $k = shift @_; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:241): > 241: if (!$k and $^W) { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:246): > 246: $k = ucfirst lc($k); > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:248): > 248: $k =~ s/\s*:\s*$//o; # kill colon (and possible spaces) at > end, we add it later. > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:251): > 251: $k =~ s/-(.)/"-" . uc($1)/ge; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:252): > 252: $mail{$k} = shift @_; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:253): > 253: if ($k !~ /^(Message|Body|Text)$/i) { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:255): > 255: $mail{$k} =~ s/\015\012?/\012/go; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:256): > 256: $mail{$k} =~ s/\012/$CRLF/go; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:240): > 240: $k = shift @_; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:241): > 241: if (!$k and $^W) { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:246): > 246: $k = ucfirst lc($k); > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:248): > 248: $k =~ s/\s*:\s*$//o; # kill colon (and possible spaces) at > end, we add it later. > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:251): > 251: $k =~ s/-(.)/"-" . uc($1)/ge; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:252): > 252: $mail{$k} = shift @_; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:253): > 253: if ($k !~ /^(Message|Body|Text)$/i) { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:240): > 240: $k = shift @_; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:241): > 241: if (!$k and $^W) { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:246): > 246: $k = ucfirst lc($k); > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:248): > 248: $k =~ s/\s*:\s*$//o; # kill colon (and possible spaces) at > end, we add it later. > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:251): > 251: $k =~ s/-(.)/"-" . uc($1)/ge; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:251): > 251: $k =~ s/-(.)/"-" . uc($1)/ge; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:252): > 252: $mail{$k} = shift @_; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:253): > 253: if ($k !~ /^(Message|Body|Text)$/i) { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:255): > 255: $mail{$k} =~ s/\015\012?/\012/go; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:256): > 256: $mail{$k} =~ s/\012/$CRLF/go; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:240): > 240: $k = shift @_; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:241): > 241: if (!$k and $^W) { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:246): > 246: $k = ucfirst lc($k); > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:248): > 248: $k =~ s/\s*:\s*$//o; # kill colon (and possible spaces) at > end, we add it later. > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:251): > 251: $k =~ s/-(.)/"-" . uc($1)/ge; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:252): > 252: $mail{$k} = shift @_; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:253): > 253: if ($k !~ /^(Message|Body|Text)$/i) { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:255): > 255: $mail{$k} =~ s/\015\012?/\012/go; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:256): > 256: $mail{$k} =~ s/\012/$CRLF/go; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:240): > 240: $k = shift @_; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:241): > 241: if (!$k and $^W) { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:246): > 246: $k = ucfirst lc($k); > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:248): > 248: $k =~ s/\s*:\s*$//o; # kill colon (and possible spaces) at > end, we add it later. > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:251): > 251: $k =~ s/-(.)/"-" . uc($1)/ge; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:251): > 251: $k =~ s/-(.)/"-" . uc($1)/ge; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:252): > 252: $mail{$k} = shift @_; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:253): > 253: if ($k !~ /^(Message|Body|Text)$/i) { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:255): > 255: $mail{$k} =~ s/\015\012?/\012/go; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:256): > 256: $mail{$k} =~ s/\012/$CRLF/go; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:260): > 260: $smtp = $mail{'Smtp'} || $mail{'Server'}; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:261): > 261: unshift @{$mailcfg{'smtp'}}, $smtp if ($smtp and > $mailcfg{'smtp'}->[0] ne $smtp); > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:267): > 267: delete $mail{'Smtp'}; delete $mail{'Server'}; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:267): > 267: delete $mail{'Smtp'}; delete $mail{'Server'}; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:269): > 269: $mailcfg{'port'} = $mail{'Port'} || $mailcfg{'port'} || 25; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:270): > 270: delete $mail{'Port'}; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:272): > 272: my $auth = $mail{'Auth'}; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:273): > 273: delete $mail{'Auth'}; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:277): > 277: local $^W = 0; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:277): > 277: local $^W = 0; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:278): > 278: $mail{'Message'} = join("", $mail{'Message'}, > $mail{'Body'}, $mail{'Text'}); > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:282): > 282: delete $mail{'Body'}; delete $mail{'Text'}; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:282): > 282: delete $mail{'Body'}; delete $mail{'Text'}; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:286): > 286: $fromaddr = $mail{'Sender'} || $mail{'From'} || > $mailcfg{'from'}; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:288): > 288: unless ($fromaddr =~ /$address_rx/) { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:291): > 291: $fromaddr = $1; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:294): > 294: $mail{Date} ||= time_to_date() ; > Mail::Sendmail::time_to_date(/usr/share/perl5/Mail/Sendmail.pm:143): > 143: my $time = $_[0] || time(); # default to now if no argument > Mail::Sendmail::time_to_date(/usr/share/perl5/Mail/Sendmail.pm:145): > 145: my @months = qw(Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov > Dec); > Mail::Sendmail::time_to_date(/usr/share/perl5/Mail/Sendmail.pm:146): > 146: my @wdays = qw(Sun Mon Tue Wed Thu Fri Sat); > Mail::Sendmail::time_to_date(/usr/share/perl5/Mail/Sendmail.pm:148): > 148: my ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) > 149: = localtime($time); > Mail::Sendmail::time_to_date(/usr/share/perl5/Mail/Sendmail.pm:151): > 151: my $TZ = $mailcfg{'tz'}; > Mail::Sendmail::time_to_date(/usr/share/perl5/Mail/Sendmail.pm:152): > 152: if ( $TZ eq "" ) { > Mail::Sendmail::time_to_date(/usr/share/perl5/Mail/Sendmail.pm:154): > 154: my $offset = sprintf "%.1f", (timegm(localtime) - time) / > 3600; > Time::Local::timegm(/usr/share/perl/5.22/Time/Local.pm:98): > 98: my ( $sec, $min, $hour, $mday, $month, $year ) = @_; > Time::Local::timegm(/usr/share/perl/5.22/Time/Local.pm:100): > 100: if ( $year >= 1000 ) { > Time::Local::timegm(/usr/share/perl/5.22/Time/Local.pm:107): > 107: unless ( $Options{no_range_check} ) { > Time::Local::timegm(/usr/share/perl/5.22/Time/Local.pm:108): > 108: croak "Month '$month' out of range 0..11" > 109: if $month > 11 > 110: or $month < 0; > Time::Local::timegm(/usr/share/perl/5.22/Time/Local.pm:112): > 112: my $md = $MonthDays[$month]; > Time::Local::timegm(/usr/share/perl/5.22/Time/Local.pm:113): > 113: ++$md > 114: if $month == 1 && _is_leap_year( $year + 1900 ); > Time::Local::timegm(/usr/share/perl/5.22/Time/Local.pm:116): > 116: croak "Day '$mday' out of range 1..$md" if $mday > $md or > $mday < 1; > Time::Local::timegm(/usr/share/perl/5.22/Time/Local.pm:117): > 117: croak "Hour '$hour' out of range 0..23" if $hour > 23 or > $hour < 0; > Time::Local::timegm(/usr/share/perl/5.22/Time/Local.pm:118): > 118: croak "Minute '$min' out of range 0..59" if $min > 59 or > $min < 0; > Time::Local::timegm(/usr/share/perl/5.22/Time/Local.pm:119): > 119: croak "Second '$sec' out of range 0..59" if $sec >= 60 or > $sec < 0; > Time::Local::timegm(/usr/share/perl/5.22/Time/Local.pm:122): > 122: my $days = _daygm( undef, undef, undef, $mday, $month, $year ); > Time::Local::_daygm(/usr/share/perl/5.22/Time/Local.pm:75): > 75: $Cheat{ pack( 'ss', @_[ 4, 5 ] ) } ||= do { > Time::Local::_daygm(/usr/share/perl/5.22/Time/Local.pm:76): > 76: my $month = ( $_[4] + 10 ) % 12; > Time::Local::_daygm(/usr/share/perl/5.22/Time/Local.pm:77): > 77: my $year = $_[5] + 1900 - int($month / 10); > Time::Local::_daygm(/usr/share/perl/5.22/Time/Local.pm:79): > 79: ( ( 365 * $year ) > 80: + int( $year / 4 ) > 81: - int( $year / 100 ) > 82: + int( $year / 400 ) > 83: + int( ( ( $month * 306 ) + 5 ) / 10 ) > 84: ) > 85: - $Epoc; > Time::Local::timegm(/usr/share/perl/5.22/Time/Local.pm:124): > 124: unless ($Options{no_range_check} or abs($days) < $MaxDay) { > Time::Local::timegm(/usr/share/perl/5.22/Time/Local.pm:134): > 134: return $sec > 135: + $SecOff > 136: + ( SECS_PER_MINUTE * $min ) > 137: + ( SECS_PER_HOUR * $hour ) > 138: + ( SECS_PER_DAY * $days ); > Mail::Sendmail::time_to_date(/usr/share/perl5/Mail/Sendmail.pm:155): > 155: my $minutes = sprintf "%02d", abs( $offset - int($offset) ) > * 60; > Mail::Sendmail::time_to_date(/usr/share/perl5/Mail/Sendmail.pm:156): > 156: $TZ = sprintf("%+03d", int($offset)) . $minutes; > Mail::Sendmail::time_to_date(/usr/share/perl5/Mail/Sendmail.pm:158): > 158: return join(" ", > 159: ($wdays[$wday] . ','), > 160: $mday, > 161: $months[$mon], > 162: $year+1900, > 163: sprintf("%02d:%02d:%02d", $hour, $min, $sec), > 164: $TZ > 165: ); > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:295): > 295: $log .= "Date: $mail{Date}\n"; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:298): > 298: $mail{'Message'} =~ s/\r\n/\n/go; # normalize line endings, > step 1 of 2 (next step after MIME encoding) > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:300): > 300: $mail{'Mime-Version'} ||= '1.0'; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:301): > 301: $mail{'Content-Type'} ||= 'text/plain; charset="iso-8859-1"'; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:303): > 303: unless ( $mail{'Content-Transfer-Encoding'} > 304: || $mail{'Content-Type'} =~ /multipart/io ) > 305: { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:306): > 306: if ($mailcfg{'mime'}) { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:307): > 307: $mail{'Content-Transfer-Encoding'} = 'quoted-printable'; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:308): > 308: $mail{'Message'} = encode_qp($mail{'Message'}); > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:321): > 321: $mail{'Message'} =~ s/^\./\.\./gom; # handle . as first > character > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:322): > 322: $mail{'Message'} =~ s/\n/$CRLF/go; # normalize line endings, > step 2. > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:326): > 326: local $^W = 0; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:326): > 326: local $^W = 0; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:327): > 327: $recip = join(", ", $mail{To}, $mail{Cc}, $mail{Bcc}); > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:330): > 330: delete $mail{'Bcc'}; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:332): > 332: @recipients = (); > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:333): > 333: while ($recip =~ /$address_rx/go) { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:334): > 334: push @recipients, $1; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:336): > 336: unless (@recipients) { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:341): > 341: $localhost = hostname_long() || hostname() || 'localhost'; > Sys::Hostname::Long::hostname_long(/usr/share/perl5/Sys/Hostname/Long.pm:161): > 161: return $hostlong if defined $hostlong; # Cached copy (takes > a while to lookup sometimes) > Sys::Hostname::Long::hostname_long(/usr/share/perl5/Sys/Hostname/Long.pm:162): > 162: my ($ip, $debug) = @_; > Sys::Hostname::Long::hostname_long(/usr/share/perl5/Sys/Hostname/Long.pm:164): > 164: $hostlong = dispatcher('uname'); > Sys::Hostname::Long::dispatcher(/usr/share/perl5/Sys/Hostname/Long.pm:143): > 143: my ($method, @rest) = @_; > Sys::Hostname::Long::dispatcher(/usr/share/perl5/Sys/Hostname/Long.pm:144): > 144: $lastdispatch = $method; > Sys::Hostname::Long::dispatcher(/usr/share/perl5/Sys/Hostname/Long.pm:145): > 145: return $dispatch{$method}{exec}(@rest); > Sys::Hostname::Long::CODE(0x1dd7a50)(/usr/share/perl5/Sys/Hostname/Long.pm:51): > 51: return eval { > Sys::Hostname::Long::CODE(0x1dd7a50)(/usr/share/perl5/Sys/Hostname/Long.pm:52): > 52: local $SIG{__DIE__}; > Sys::Hostname::Long::CODE(0x1dd7a50)(/usr/share/perl5/Sys/Hostname/Long.pm:53): > 53: require POSIX; > Sys::Hostname::Long::CODE(0x1dd7a50)(/usr/share/perl5/Sys/Hostname/Long.pm:54): > 54: (POSIX::uname())[1]; > Sys::Hostname::Long::hostname_long(/usr/share/perl5/Sys/Hostname/Long.pm:166): > 166: unless ($hostlong =~ m|.*\..*|) { > Sys::Hostname::Long::hostname_long(/usr/share/perl5/Sys/Hostname/Long.pm:167): > 167: if ($^O eq 'MacOS') { > Sys::Hostname::Long::hostname_long(/usr/share/perl5/Sys/Hostname/Long.pm:193): > 193: $hostlong = dispatcher('exec_hostname_fqdn'); > Sys::Hostname::Long::dispatcher(/usr/share/perl5/Sys/Hostname/Long.pm:143): > 143: my ($method, @rest) = @_; > Sys::Hostname::Long::dispatcher(/usr/share/perl5/Sys/Hostname/Long.pm:144): > 144: $lastdispatch = $method; > Sys::Hostname::Long::dispatcher(/usr/share/perl5/Sys/Hostname/Long.pm:145): > 145: return $dispatch{$method}{exec}(@rest); > Sys::Hostname::Long::CODE(0x1de1810)(/usr/share/perl5/Sys/Hostname/Long.pm:77): > 77: my $tmp; > Sys::Hostname::Long::CODE(0x1de1810)(/usr/share/perl5/Sys/Hostname/Long.pm:78): > 78: if ( $^O ne 'darwin' ) { > Sys::Hostname::Long::CODE(0x1de1810)(/usr/share/perl5/Sys/Hostname/Long.pm:79): > 79: if ($< == 0) { > Sys::Hostname::Long::CODE(0x1de1810)(/usr/share/perl5/Sys/Hostname/Long.pm:82): > 82: $tmp = `hostname --fqdn`; > Sys::Hostname::Long::CODE(0x1de1810)(/usr/share/perl5/Sys/Hostname/Long.pm:84): > 84: $tmp =~ tr/\0\r\n//d; > Sys::Hostname::Long::CODE(0x1de1810)(/usr/share/perl5/Sys/Hostname/Long.pm:86): > 86: return $tmp; > Sys::Hostname::Long::hostname_long(/usr/share/perl5/Sys/Hostname/Long.pm:196): > 196: if (!defined($hostlong) || $hostlong eq "") { > Sys::Hostname::Long::hostname_long(/usr/share/perl5/Sys/Hostname/Long.pm:202): > 202: if ($ip && !defined($hostlong) || $hostlong eq "") { > Sys::Hostname::Long::hostname_long(/usr/share/perl5/Sys/Hostname/Long.pm:206): > 206: warn "Sys::Hostname::Long - Last Dispatch method = > $lastdispatch" if ($debug); > Sys::Hostname::Long::hostname_long(/usr/share/perl5/Sys/Hostname/Long.pm:207): > 207: return $hostlong; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:343): > 343: foreach $server ( @{$mailcfg{'smtp'}} ) { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:343): > 343: foreach $server ( @{$mailcfg{'smtp'}} ) { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:346): > 346: unless ( socket S, AF_INET, SOCK_STREAM, > scalar(getprotobyname 'tcp') ) { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:350): > 350: print "- trying $server\n" if $mailcfg{'debug'} > 1; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:352): > 352: $server =~ s/\s+//go; # remove spaces just in case of a typo > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:354): > 354: $port = ($server =~ s/:(\d+)$//o) ? $1 : $mailcfg{'port'}; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:355): > 355: $smtp = $server; # save $server for use outside foreach loop > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:357): > 357: my $smtpaddr = inet_aton $server; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:358): > 358: unless ($smtpaddr) { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:363): > 363: my $retried = 0; # reset retries for each server > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:364): > 364: while ( ( not $connected = connect S, > pack_sockaddr_in($port, $smtpaddr) ) > 365: and ( $retried < $mailcfg{'retries'} ) > 366: ) { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:367): > 367: $retried++; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:368): > 368: $error .= "connect to $server failed ($!)\n"; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:369): > 369: print "- connect to $server failed ($!)\n" if > $mailcfg{'debug'} > 1; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:370): > 370: print "retrying in $mailcfg{'delay'} seconds...\n" if > $mailcfg{'debug'} > 1; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:371): > 371: sleep $mailcfg{'delay'}; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:374): > 374: if ( $connected ) { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:379): > 379: $error .= "connect to $server failed\n"; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:380): > 380: print "- connect to $server failed, next server...\n" > if $mailcfg{'debug'} > 1; > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:381): > 381: next; # next server > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:385): > 385: unless ( $connected ) { > Mail::Sendmail::sendmail(/usr/share/perl5/Mail/Sendmail.pm:386): > 386: return fail("connect to $smtp failed ($!) no (more) > retries!") > Mail::Sendmail::fail(/usr/share/perl5/Mail/Sendmail.pm:187): > 187: $error .= join(" ", @_) . "\n"; > Mail::Sendmail::fail(/usr/share/perl5/Mail/Sendmail.pm:188): > 188: if ($server_reply) { > Mail::Sendmail::fail(/usr/share/perl5/Mail/Sendmail.pm:192): > 192: close S; > Mail::Sendmail::fail(/usr/share/perl5/Mail/Sendmail.pm:193): > 193: return 0; > scalar context return from Mail::Sendmail::sendmail: 0 > C4::Letters::_send_message_by_email(/usr/share/koha/lib/C4/Letters.pm:1349): > 1349: _set_message_status( { message_id => > $message->{'message_id'}, > 1350: status => 'failed' } ); > DB<4> > > Regards, > > Javed Shoukat > > Management Trainee Officer (MTO) > Lahore University of > Management Sciences (LUMS), > Lahore. > > Contact #: +92 300 6548748 <+92%20300%206548748> > Email: javedshoukat900(a)gmail.com -- Paul Hoffman <paul(a)flo.org> Software Manager Fenway Library Organization 550 Huntington Ave. Boston, MA 02115 (617) 442-2384 (FLO main number)

1 0

Ajax call in self checkout not working in Koha 17.05
by Krishna K 06 Dec '17

06 Dec '17

Hi all, We are currently running Koha 16.11. On a new hardware, we have installed Koha 17.05, with Ubuntu 16.04 64 bit, Mariadb 15.1 and Php 7.1. We plan to use it as the production machine shortly. We have a small customization in self checkout that that uses an ajax call to query the for the book title, to display the book title at the time of self checkout. This is not working in the new machine. But the same customization is working on our earlier version which uses Ubuntu 14.04 32 bit, Koha 16.11, MySql 5.1 and Php 5.6. Could anyone help us with some hints on why the Ajax call is not working in the new setup ? Thanks in advance, Krishna -- Regards, Krishna

3 3

Re: [Koha] [ByWater Partners] MARC field and heading validation with Koha
by Hernandez, Heather 06 Dec '17

06 Dec '17

Thank you so much for sharing all of this, Jennifer! I think we're going to give the broader... syspref setting a try after the first of the year! Cheerio! h2 ~~~~~~~~~~~~~~ Heather Hernandez Technical Services Librarian San Francisco Maritime National Historical Park Research Center 2 Marina Blvd., Bldg. E, 3rd floor, San Francisco, CA 94123-1284 415-561-7032, heather_hernandez(a)nps.gov https://www.nps.gov/safr/learn/historyculture/research-center.htm

1 0

Re: [Koha] [ByWater Partners] MARC field and heading validation with Koha
by Reichert, Kumiko 06 Dec '17

06 Dec '17

Thanks, Heather and Joy, for excellent observations. The story with my library is that the authority database currently is in a bad shape since it has not been through any vendor or in-house maintenance for years. I am planning to have a vendor for the authority and bib maintenance next year. After it is done, I would like to create a local workflow in terms of heading-control. Karen and Dani showed me $9 as well as Tag Editor in the basic view. I also learned the authority linker. I am interested in using the linker and retrieve a list of unlinked headings for in-house maintenance as well as NACO contribution. Joy's broader-heading option sounds useful for me to consider utilizing, too. Thanks for your input! I am looking forward to learning these things and Koha in general better. Sincerely, Kumiko Kumiko Reichert Metadata and Cataloging Librarian Maxwell Library Bridgewater State University 10 Shaw Road Bridgewater, MA 02325 kumiko.reichert(a)bridgew.edu<mailto:kreichert@bridgew.edu> 508-531-2665 ________________________________ From: Joy Nelson <joy(a)bywatersolutions.com> Sent: Wednesday, December 6, 2017 10:32:09 AM To: Hernandez, Heather Cc: Reichert, Kumiko; koha(a)lists.katipo.co.nz; ByWater Partners Subject: Re: [ByWater Partners] [Koha] MARC field and heading validation with Koha As a side note to Heather's excellent synopsis, I'd like to add something. If you choose to use the authority/bib linker cronjob you have the option to match to 'broader headings'. So in the example Heather gave, using the automated linking to authority records with a 'broader heading' preference you would match a bib with Women Sailors -- Fiction to the authority record of Women sailors. Thanks! joy ******************************* this heading in a bib record will validate & link to an authority record (which one can see with the $9): 650 _ 0 $a Women sailors. $9 17788 But this heading will not validate & link (so lacks the $9), because authority records are not created with headings with free-floating subdivisions such as "$v Fiction:" 650 _ 0 ‡aWomen sailors‡vFiction. ******************************** On Wed, Dec 6, 2017 at 9:26 AM, Hernandez, Heather <heather_hernandez(a)nps.gov<mailto:heather_hernandez@nps.gov>> wrote: Hi, Kumiko-- I'm not sure our workflow would be applicable since we're a very specialized museum library, but maybe you'll get some ideas? We lacked a lot of authority capabilities in our previous catalog software (Athena), so our headings were & are pretty messy. I'm in the middle of a project to clean up the authority file and then the remaining authority controlled fields in the bib records. So, that said: I catalog on OCLC (Connexion Client) but am experimenting with creating original records in Koha with the Advanced Editor. I manually search every single authority controlled field in the Koha authority file, and download new authority records from OCLC (or for locally created name, series, etc., records, key them very laboriously into Koha since there's no Advanced Editor for authority records--I so dearly hope one is developed!). If I have reason to substantially edit a bib record, I'll manually search all the authority controlled fields that lack a $9 authority record link--I have to do this manually because our Koha installation doesn't validate any headings that have subfields that are not present in an authority record--that is, only authority-controlled bib fields that match every, single subfield in the authority record will validate & link. So, e.g., in our catalog, this heading in a bib record will validate & link to an authority record (which one can see with the $9): 650 _ 0 $a Women sailors. $9 17788 But this heading will not validate & link (so lacks the $9), because authority records are not created with headings with free-floating subdivisions such as "$v Fiction:" 650 _ 0 ‡aWomen sailors‡vFiction. So with us, authority control is still a human function. We thought briefly about using a vendor for the initial cleanup (I've had this done at previous jobs & it's worked very well), but we lack the funds for such a project. One feature that is beautiful is that *if* headings are linked to an authority record, once the authority record is edited or overlaid with a newer imported version, the linked headings are pretty instantly changed. Then it's just a matter of some searching & manual editing to update the headings that aren't linked because they have, e.g., free-floating subdivisions. Or typos...sigh...:) Our catalog is hosted and supported by ByWater & we've chatted a bit about how we might experiment with some changes that might improve heading linking, but haven't yet got beyond that--we have yet to upgrade beyond 17.05, so have yet to implement ElasticSearch which, I imagine, might impact indexing/linking. Hope this is helpful! Cheerio, h2 ~~~~~~~~~~~~~~ Heather Hernandez Technical Services Librarian San Francisco Maritime National Historical Park Research Center 2 Marina Blvd., Bldg. E, 3rd floor, San Francisco, CA 94123-1284 415-561-7032, heather_hernandez(a)nps.gov<mailto:heather_hernandez@nps.gov> https://www.nps.gov/safr/learn/historyculture/research-center.htm _______________________________________________ Partners mailing list Partners(a)lists.bywatersolutions.com<mailto:Partners@lists.bywatersolutions.com> http://lists.bywatersolutions.com/mailman/listinfo/partners -- Joy Nelson Vice President, Director of Implementations ByWater Solutions<http://bywatersolutions.com> Support and Consulting for Open Source Software Office: Fort Worth, TX Phone/Fax (888)900-8944 What is Koha? <http://bywatersolutions.com/what-is-koha/>

1 0

Re: [Koha] [ByWater Partners] MARC field and heading validation with Koha
by Hernandez, Heather 06 Dec '17

06 Dec '17

Hi, Joy! I haven't yet tried to set the LinkerOptions system preference to "broader_headings" because the manual (at https://koha-community.org/manual/17.05/html/02_administration.html?highlig…) says: *Important* This feature is experimental and shouldn’t be used in a production environment until further expanded upon. Is it OK to put into the LinkerOptions syspref: broader_headings and give it a try? Am I misreading that manual section? Thanks! Cheerio! h2 ~~~~~~~~~~~~~~ Heather Hernandez Technical Services Librarian San Francisco Maritime National Historical Park Research Center 2 Marina Blvd., Bldg. E, 3rd floor, San Francisco, CA 94123-1284 415-561-7032, heather_hernandez(a)nps.gov https://www.nps.gov/safr/learn/historyculture/research-center.htm

1 0

Re: [Koha] Koha Digest, Vol 146, Issue 14
by Hirak Jyoti Hazarika 06 Dec '17

06 Dec '17

On Dec 6, 2017 9:50 PM, <koha-request(a)lists.katipo.co.nz> wrote: > Send Koha mailing list submissions to > koha(a)lists.katipo.co.nz > > To subscribe or unsubscribe via the World Wide Web, visit > https://lists.katipo.co.nz/mailman/listinfo/koha > or, via email, send a message with subject or body 'help' to > koha-request(a)lists.katipo.co.nz > > You can reach the person managing the list at > koha-owner(a)lists.katipo.co.nz > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Koha digest..." > > > Today's Topics: > > 1. Re: Look for records with specific info in a mark field > (Barton Chittenden) > 2. Re: KOCT 0.4.5 (Tomas Cohen Arazi) > 3. Re: Can't run auth_show_hidden_data.pl script (Mark Alexander) > 4. Re: MARC field and heading validation with Koha > (Hernandez, Heather) > 5. Re: Can't run auth_show_hidden_data.pl script > (Prof. Lisandro Laura) > 6. where to set Refund lost item fee (Admire Mutsikiwa) > 7. Re: where to set Refund lost item fee (Jonathan Druart) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 6 Dec 2017 09:45:07 -0500 > From: Barton Chittenden <barton(a)bywatersolutions.com> > To: Katrin Fischer <Katrin.Fischer.83(a)web.de> > Cc: koha <koha(a)lists.katipo.co.nz> > Subject: Re: [Koha] Look for records with specific info in a mark > field > Message-ID: > <CAMSJbVuS5HmAKFJib6WzytUNDrvnVaYC14hgpi0N+YroV3iBHQ@mail. > gmail.com> > Content-Type: text/plain; charset="UTF-8" > > Good answer, Katrin! > > On Dec 4, 2017 15:17, "Katrin Fischer" <katrin.fischer.83(a)web.de> wrote: > > > Hi Alvaro, > > > > yes, Koha stores the complete record as MARCXML and only some fields are > > mapped to database columns. You can see the mappings in Administration > > > Koha to MARC mappings. Be careful, after changing it you need to run a > > script to populate database fields correctly. The MARC record is stored > in > > either biblioitems.marcxml (older versions) or biblio_metadata.metadata > > (current versions) and can be queried using the ExtractValue function. > You > > can find examples in the reports library on the wiki: > > > > https://wiki.koha-community.org/wiki/SQL_Reports_Library#Query_MARC > > > > Hope this helps, > > > > Katrin > > > > > > On 04.12.2017 21:03, Alvaro Cornejo wrote: > > > >> Hi > >> > >> How can I do a MySQL search for all the records/items with an specific > >> value in an specific marc field Xx? > >> > >> I've looked at the bilblio and related tables but I'm unable to find a > >> table with marcs fields info. I saw some marcxml fields however; are > marc > >> values stored there and I need to xlmparse that info to get an specific > >> value? > >> > >> Regards > >> > >> Alvaro > >> _______________________________________________ > >> Koha mailing list http://koha-community.org > >> Koha(a)lists.katipo.co.nz > >> https://lists.katipo.co.nz/mailman/listinfo/koha > >> > > > > _______________________________________________ > > Koha mailing list http://koha-community.org > > Koha(a)lists.katipo.co.nz > > https://lists.katipo.co.nz/mailman/listinfo/koha > > > > > ------------------------------ > > Message: 2 > Date: Wed, 06 Dec 2017 14:50:16 +0000 > From: Tomas Cohen Arazi <tomascohen(a)gmail.com> > To: Matthias Meusburger <matthias.meusburger(a)biblibre.com> > Cc: Koha <koha(a)lists.katipo.co.nz> > Subject: Re: [Koha] KOCT 0.4.5 > Message-ID: > <CABZfb=XxrRm68QxTTwXvyMwFkPojqmeuHHzR30JbiRP9Js6tAg@mail. > gmail.com> > Content-Type: text/plain; charset="UTF-8" > > Excelent work, Matthias! > > El mié., 6 dic. 2017 a las 9:27, Matthias Meusburger (< > matthias.meusburger(a)biblibre.com>) escribió: > > > Hi everyone, > > > > We had a "Ship it" day during this Biblibre winter camp, and I chose to > > work on KOCT. > > > > So here's what's new in v0.4.5: > > > > - Add a "configuration test" button which will check if koha host, > > username and password are ok > > > > > > - Retrieve branchnames and branchcodes as a dropdown list > > > > (when https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=16497 is > > available, adresses > > https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=19689 ) > > > > > > - Cleaner error handling > > > > (when https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=19752 is > > available) > > > > > > - Add data export in Koc format > > > > (see > > https://wiki.koha-community.org/wiki/Koha_offline_ > circulation_file_format > > ) > > > > > > - Add a button to jump to the configuration page. > > > > > > This new version should be available at Mozilla's in a couple of days. > > > > Enjoy :) > > _______________________________________________ > > Koha mailing list http://koha-community.org > > Koha(a)lists.katipo.co.nz > > https://lists.katipo.co.nz/mailman/listinfo/koha > > > -- > Tomás Cohen Arazi > Theke Solutions (https://theke.io <http://theke.io/>) > ✆ +54 9351 3513384 > GPG: B2F3C15F > > > ------------------------------ > > Message: 3 > Date: Wed, 06 Dec 2017 09:51:39 -0500 > From: Mark Alexander <marka(a)pobox.com> > To: Prof. Lisandro Laura <prof.llaura(a)gmail.com> > Cc: koha <koha(a)lists.katipo.co.nz> > Subject: Re: [Koha] Can't run auth_show_hidden_data.pl script > Message-ID: <1512571828-sup-6391@t60p> > Content-Type: text/plain; charset=UTF-8 > > Excerpts from Prof. Lisandro Laura's message of 2017-12-06 11:41:57 -0300: > > perl ./usr/share/koha/bin/maintenance/auth_show_hidden_data.pl > > > > But I get the following error: > > > > "Can't locate Koha/Authorities.pm in @INC (you may need to install the > > Koha::Authorities module) (@INC contains: /etc/perl > > This sounds familiar. Try running the following command first: > > koha-shell LIBRARY > > where LIBRARY is your Koha instance name. After that, the various > Koha shell scripts should work. > > > ------------------------------ > > Message: 4 > Date: Wed, 6 Dec 2017 07:26:01 -0800 > From: "Hernandez, Heather" <heather_hernandez(a)nps.gov> > To: "Reichert, Kumiko" <KREICHERT(a)bridgew.edu> > Cc: "koha(a)lists.katipo.co.nz" <koha(a)lists.katipo.co.nz>, ByWater > Partners <partners(a)bywatersolutions.com> > Subject: Re: [Koha] MARC field and heading validation with Koha > Message-ID: > <CADiPvh=zsi3r-CyFb-En_pk0PMPsbMHbn+wvZtaHTVW4VpH+qA@ > mail.gmail.com> > Content-Type: text/plain; charset="UTF-8" > > Hi, Kumiko-- > > I'm not sure our workflow would be applicable since we're a very > specialized museum library, but maybe you'll get some ideas? > > We lacked a lot of authority capabilities in our previous catalog software > (Athena), so our headings were & are pretty messy. I'm in the middle of a > project to clean up the authority file and then the remaining authority > controlled fields in the bib records. So, that said: > > I catalog on OCLC (Connexion Client) but am experimenting with creating > original records in Koha with the Advanced Editor. I manually search every > single authority controlled field in the Koha authority file, and download > new authority records from OCLC (or for locally created name, series, etc., > records, key them very laboriously into Koha since there's no Advanced > Editor for authority records--I so dearly hope one is developed!). > > If I have reason to substantially edit a bib record, I'll manually search > all the authority controlled fields that lack a $9 authority record link--I > have to do this manually because our Koha installation doesn't validate any > headings that have subfields that are not present in an authority > record--that is, only authority-controlled bib fields that match every, > single subfield in the authority record will validate & link. So, e.g., in > our catalog, this heading in a bib record will validate & link to an > authority record (which one can see with the $9): > 650 _ 0 $a Women sailors. $9 17788 > > But this heading will not validate & link (so lacks the $9), because > authority records are not created with headings with free-floating > subdivisions such as "$v Fiction:" > 650 _ 0 ‡aWomen sailors‡vFiction. > > So with us, authority control is still a human function. We thought > briefly about using a vendor for the initial cleanup (I've had this done at > previous jobs & it's worked very well), but we lack the funds for such a > project. > > One feature that is beautiful is that *if* headings are linked to an > authority record, once the authority record is edited or overlaid with a > newer imported version, the linked headings are pretty instantly changed. > Then it's just a matter of some searching & manual editing to update the > headings that aren't linked because they have, e.g., free-floating > subdivisions. Or typos...sigh...:) > > Our catalog is hosted and supported by ByWater & we've chatted a bit about > how we might experiment with some changes that might improve heading > linking, but haven't yet got beyond that--we have yet to upgrade beyond > 17.05, so have yet to implement ElasticSearch which, I imagine, might > impact indexing/linking. > > Hope this is helpful! Cheerio, > h2 > ~~~~~~~~~~~~~~ > Heather Hernandez > Technical Services Librarian > San Francisco Maritime National Historical Park Research Center > 2 Marina Blvd., Bldg. E, 3rd floor, San Francisco, CA 94123-1284 > 415-561-7032, heather_hernandez(a)nps.gov > https://www.nps.gov/safr/learn/historyculture/research-center.htm > > > ------------------------------ > > Message: 5 > Date: Wed, 6 Dec 2017 12:51:12 -0300 > From: "Prof. Lisandro Laura" <prof.llaura(a)gmail.com> > To: Mark Alexander <marka(a)pobox.com> > Cc: koha <koha(a)lists.katipo.co.nz> > Subject: Re: [Koha] Can't run auth_show_hidden_data.pl script > Message-ID: > <CAJoiCcmR1ysfZoXYq7ox3uxBN5xpt+XTcDx7b-Rqd7q8D7aNgA@mail. > gmail.com> > Content-Type: text/plain; charset="UTF-8" > > Perfect! > That works > Thank you, > Lisandro > > 2017-12-06 11:51 GMT-03:00 Mark Alexander <marka(a)pobox.com>: > > Excerpts from Prof. Lisandro Laura's message of 2017-12-06 11:41:57 > -0300: > >> perl ./usr/share/koha/bin/maintenance/auth_show_hidden_data.pl > >> > >> But I get the following error: > >> > >> "Can't locate Koha/Authorities.pm in @INC (you may need to install the > >> Koha::Authorities module) (@INC contains: /etc/perl > > > > This sounds familiar. Try running the following command first: > > > > koha-shell LIBRARY > > > > where LIBRARY is your Koha instance name. After that, the various > > Koha shell scripts should work. > > > ------------------------------ > > Message: 6 > Date: Wed, 6 Dec 2017 17:56:52 +0200 > From: "Admire Mutsikiwa" <amutsikiwa(a)uzlib.uz.ac.zw> > To: <koha(a)lists.katipo.co.nz> > Subject: [Koha] where to set Refund lost item fee > Message-ID: <00b201d36eaa$d5844ef0$808cecd0$(a)uzlib.uz.ac.zw> > Content-Type: text/plain; charset="us-ascii" > > Hi > > I would like to enquire as to where the Refund Lot Item fee is configured. > > > > > > > > > > > Kind Regards, > > > > Admire Mutsikiwa (Mr) > > ICT Manager > > Libraries > > University of Zimbabwe > > Tel:+263-4-303276 > > Mob:+263771117777 > > > > "It is easy to dodge our responsibilities, but we cannot dodge the > consequences of dodging our responsibilities." Josiah Charles Stamp > <http://www.goodreads.com/author/show/4867406.Josiah_Charles_Stamp> > > > > > > ------------------------------ > > Message: 7 > Date: Wed, 06 Dec 2017 16:19:44 +0000 > From: Jonathan Druart <jonathan.druart(a)bugs.koha-community.org> > To: Admire Mutsikiwa <amutsikiwa(a)uzlib.uz.ac.zw> > Cc: koha(a)lists.katipo.co.nz > Subject: Re: [Koha] where to set Refund lost item fee > Message-ID: > <CAJzKNY4_u41r_9X-hUDyMtdmu3Ew7CuM1f_ > AoG2OQ6ytLXrkZg(a)mail.gmail.com> > Content-Type: text/plain; charset="UTF-8" > > Hi Admire, > See on the circulation rules page: "Default lost item fee refund on return > policy" > > As well as the "Processing fee (when lost)" value when you edit item types. > > Regards, > > Jonathan > > On Wed, 6 Dec 2017 at 12:56 Admire Mutsikiwa <amutsikiwa(a)uzlib.uz.ac.zw> > wrote: > > > Hi > > > > I would like to enquire as to where the Refund Lot Item fee is > configured. > > > > > > > > > > > > > > > > > > > > > > Kind Regards, > > > > > > > > Admire Mutsikiwa (Mr) > > > > ICT Manager > > > > Libraries > > > > University of Zimbabwe > > > > Tel:+263-4-303276 <+263%204%20303%20276> > > > > Mob:+263771117777 <+263%2077%20111%207777> > > > > > > > > "It is easy to dodge our responsibilities, but we cannot dodge the > > consequences of dodging our responsibilities." Josiah Charles Stamp > > <http://www.goodreads.com/author/show/4867406.Josiah_Charles_Stamp> > > > > > > > > _______________________________________________ > > Koha mailing list http://koha-community.org > > Koha(a)lists.katipo.co.nz > > https://lists.katipo.co.nz/mailman/listinfo/koha > > > > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > Koha mailing list > Koha(a)lists.katipo.co.nz > https://lists.katipo.co.nz/mailman/listinfo/koha > > > ------------------------------ > > End of Koha Digest, Vol 146, Issue 14 > ************************************* >

1 0