- Koha - lists.katipo.co.nz

problem with authority
by Marisa Wood 11 Sep '08

11 Sep '08

Hi there, I am trying to import MARC authority records using the bulkauthimport script and am not having any luck. I'm running 2.2.9. I've defined authority types and only attempted to import a small number of one type. I am seeing the following in the script, which makes it seem that Koha wants UNIMARC authority records as these codes correspond to byte 9 (I think) in a UNIMARC authority. $authtypecode="NP" if ($authtypecode eq 'a'); # personnes $authtypecode="CO" if ($authtypecode eq 'b'); # collectivités $authtypecode="NG" if ($authtypecode eq 'c'); # géographique $authtypecode="NM" if ($authtypecode eq 'd'); # marque $authtypecode="NF" if ($authtypecode eq 'e'); # famille $authtypecode="TI" if ($authtypecode eq 'f'); # Titre uniforme $authtypecode="TI" if ($authtypecode eq 'h'); # auteur/titre $authtypecode="MM" if ($authtypecode eq 'j'); # mot matière I have no problem manually adding authorities, but would I'd much rather import, of course. Thanks in advance for any advice, or for pointing out the obvious... Marisa Wood, MLIS Member Support Specialist BCR 14394 E. Evans Ave. Aurora, CO 80014 303.751.6277/800.397.1552

1 0

Re: [Koha] Funds and budgets
by Nicole Engard 11 Sep '08

11 Sep '08

The ones showing are the ones for the library you're logged in as - if you log in as a staff member at a different library then you'll see those budgets instead. --- Nicole C. Engard Open Source Evangelist, LibLime (888) Koha ILS (564-2457) ext. 714 nce(a)liblime.com AIM/Y!/Skype: nengard http://liblime.com http://blogs.liblime.com/open-sesame/ On Thu, Sep 11, 2008 at 11:52 AM, Lexa Long <llong(a)shepherd.edu> wrote: > Nicole: > > > Thank you for your reply. I have tried all of this. I have set branch > libraries, funds with budgets but none of this appears in Acquisitions. > The only funds and budgets that appear are the ones attached to the > library set when the system was install. What I am doing wrong? > > Lexa > > -----Original Message----- > From: Nicole Engard [mailto:nicole.engard@liblime.com] > Sent: Thursday, September 11, 2008 8:36 AM > To: Lexa Long > Cc: koha(a)lists.katipo.co.nz > Subject: Re: [Koha] Funds and budgets > > This may be for help for you: > http://sites.google.com/a/liblime.com/koha-manual/ > > You can set up funds for different branches. > > > --- > > Nicole C. Engard > Open Source Evangelist, LibLime > (888) Koha ILS (564-2457) ext. 714 > nce(a)liblime.com > AIM/Y!/Skype: nengard > > http://liblime.com > http://blogs.liblime.com/open-sesame/ > > > > On Thu, Sep 11, 2008 at 8:33 AM, Lexa Long <llong(a)shepherd.edu> wrote: >> Another question from a new user with no Linnux programmer or the > original >> installer. >> >> >> >> Are funds and budgets only tied to the library that is set when the > system >> is installed? I have tried branch libraries but am unable to get > funds and >> budgets attached to these libraries. >> >> >> >> Thanks for your help. >> >> >> >> >> >> Lexa V. Long >> >> Acquisions Associate >> >> Scarborough Library >> >> Shepherds University >> >> P. O. Box 5001 >> >> Shepherdstown, WV 25443 >> >> (304) 876-5417 OFFICE >> >> (304) 876-0731 Fax >> >> llong(a)shepherd.edu >> >> >> >> _______________________________________________ >> Koha mailing list >> Koha(a)lists.katipo.co.nz >> http://lists.katipo.co.nz/mailman/listinfo/koha >> >> >

1 0

Importing Patrons: Cannot parse UTF8 characters in csv-file
by Marc Nürnberger 11 Sep '08

11 Sep '08

Dear all, Is there a way to import UTF8-encoded csv-files containing characters beyond the ascii-rage, i.e. umlauts, diacritcs, or asian characters? At the first problematic character in a file, I get the following error analysis: Line 3 could not be parsed! 5,20080006,Möller,firstname,title,...... In this example the "ö" causes the error. Best regards, Marc

3 2

Step by Step guide for generating barcodes in Koha 2.2.9 Windows Version
by Mitali Phatarpekar 11 Sep '08

11 Sep '08

Could anyone guide me through generation of barcodes using Koha 2.2.9-Windows version. Mitali

3 2

Funds and budgets
by Lexa Long 11 Sep '08

11 Sep '08

Another question from a new user with no Linnux programmer or the original installer. Are funds and budgets only tied to the library that is set when the system is installed? I have tried branch libraries but am unable to get funds and budgets attached to these libraries. Thanks for your help. Lexa V. Long Acquisions Associate Scarborough Library Shepherds University P. O. Box 5001 Shepherdstown, WV 25443 (304) 876-5417 OFFICE (304) 876-0731 Fax llong(a)shepherd.edu

2 1

Renewals in 3.0
by Tim McMahon 11 Sep '08

11 Sep '08

I'm noticing every item that's checked out in 3.0 had "Too Many Renewals " in the "Renew?" column. I have items set to allow 1 renewal. What am I missing? -- Tim McMahon Technical Services West Liberty Public Library

3 3

Koha 3.0 for Windows
by Mitali Phatarpekar 11 Sep '08

11 Sep '08

Hi, I want to upgrade my Koha version from 2.2.9 to 3.0 .I am working on Windows version of Koha.I wanted to know whether Koha 3.0 for windows has been released?????? Mitali

2 1

Some migration issues
by Jameel Akhtar 11 Sep '08

11 Sep '08

DEAR All I am new user of KOHA, I have face some problems to import data My all data is MS ACCESS Format and not standard of marc, plz help me to import all data to KOHA Jameel Akhtar Library Officer Professional Development Centre Northern Areas University Road Konodass Gilgit e-mail: jameel(a)pdcn.edu.pk : jameelakhter(a)hotmail.com : jameelakhter2007(a)yahoo.com Ph: (92) 05811-54132-4 ext 3016 Mobile : 0344-2223384

2 1

Libraries, funds and budgets
by Lexa Long 11 Sep '08

11 Sep '08

All: I am a new Koha user. I am using 3.00. My Koha was installed last week but the person who installed has left the library and I do not have a Linnux programmer on staff at this time. We are only using Acquisitions as we make plans to migrate the rest of the system. Our ILS system as of now is Voyager. We have not used Voyager Acquisitions. Last year we use a program called OSA. My problem is the Library Director wants the budget to be leveled much like Voyager. He wants Library, then Schools, then Types of Material. He also has some funds that are not part of the general library budget to display on the main acquisitions page. In general the budget would look as follows: Library Total amount of expenditures School Total for the School Books Serials Electronic Resources Is there a way to do this in Koha without a major rewrite of Acquisitions. I am open to other suggestions. He wants to see it at a glance and not write a report all the time. Lexa V. Long Acquisions Associate Scarborough Library Shepherds University P. O. Box 5001 Shepherdstown, WV 25443 (304) 876-5417 OFFICE (304) 876-0731 Fax llong(a)shepherd.edu

2 1

Z39.50 import loses UTF8 enconding?
by Marc Nürnberger 11 Sep '08

11 Sep '08

Dear all, Whenever I try to import via Z39.50 search from the LOC a record containing Asian charachters the imported record splits up the doublebyte code characters into single characters. Since I am able to query the LOC using UTF8-strings, I guess this might be a sign that the UTF8 encoding was probably lost while doing the import. The encoding problem actually shows even before I import a record and just click the preview options "MARC" or "CARD" in the results window. Going for the "Card" option, I get the following attached error message. Is there somewhere in the perlfiles a fixed encoding setting that I have to change from e.g. iso-5426 to UTF8? I would very much appreciate any hints, where to look. Best regards, Marc Error Message from "Card" preview Koha error The following fatal error has occurred: :87: parser error : PCDATA invalid Char value 27 <subfield code="a">$1!7Z!4I"KF(B.</subfield> ^ :87: parser error : PCDATA invalid Char value 27 <subfield code="a">$1!7Z!4I"KF(B.</subfield> ^ :91: parser error : PCDATA invalid Char value 27 <subfield code="a">$1!3W!:M!YF'XL(B /</subfield> ^ :91: parser error : PCDATA invalid Char value 27 <subfield code="a">$1!3W!:M!YF'XL(B /</subfield> ^ :92: parser error : PCDATA invalid Char value 27 <subfield code="c">$1!7Z!4I"KF(B, $1!7Z!@|!YF'XL(B.</subfield> ^ :92: parser error : PCDATA invalid Char value 27 <subfield code="c">$1!7Z!4I"KF(B, $1!7Z!@|!YF'XL(B.</subfield> ^ :92: parser error : PCDATA invalid Char value 27 <subfield code="c">$1!7Z!4I"KF(B, $1!7Z!@|!YF'XL(B.</subfield> ^ :92: parser error : PCDATA invalid Char value 27 <subfield code="c">$1!7Z!4I"KF(B, $1!7Z!@|!YF'XL(B.</subfield> ^ :96: parser error : PCDATA invalid Char value 27 <subfield code="a">$1!Os(B1$1!JH(B.</subfield> ^ :96: parser error : PCDATA invalid Char value 27 <subfield code="a">$1!Os(B1$1!JH(B.</subfield> ^ :96: parser error : PCDATA invalid Char value 27 <subfield code="a">$1!Os(B1$1!JH(B.</subfield> ^ :96: parser error : PCDATA invalid Char value 27 <subfield code="a">$1!Os(B1$1!JH(B.</subfield> ^ :100: parser error : PCDATA invalid Char value 27 <subfield code="a">$1!0&!GW(B :</subfield> ^ :100: parser error : PCDATA invalid Char value 27 <subfield code="a">$1!0&!GW(B :</subfield> ^ :101: parser error : PCDATA invalid Char value 27 <subfield code="b">$1!0&!GW!5.!PN!3K!JH!Na(B :</subfield> ^ :101: parser error : PCDATA invalid Char value 27 <subfield code="b">$1!0&!GW!5.!PN!3K!JH!Na(B :</subfield> ^ :102: parser error : PCDATA invalid Char value 27 <subfield code="b">$1!Be!U<!CU!<p!0&!GW!L{!WD!?u!L{!WD(B,</subfi ^ :102: parser error : PCDATA invalid Char value 27 <subfield code="b">$1!Be!U<!CU!<p!0&!GW!L{!WD!?u!L{!WD(B,</subfi ^ :107: parser error : PCDATA invalid Char value 27 <subfield code="a">$1!3W!:M(B,</subfield> ^ :107: parser error : PCDATA invalid Char value 27 <subfield code="a">$1!3W!:M(B,</subfield> ^ :109: parser error : PCDATA invalid Char value 27 <subfield code="t">$1!3W!:M(B.</subfield> ^ :109: parser error : PCDATA invalid Char value 27 <subfield code="t">$1!3W!:M(B.</subfield> ^ :113: parser error : PCDATA invalid Char value 27 <subfield code="a">$1!7Z!@|(B.</subfield> ^ :113: parser error : PCDATA invalid Char value 27 <subfield code="a">$1!7Z!@|(B.</subfield> ^ :117: parser error : PCDATA invalid Char value 27 <subfield code="a">$1!3W!:M(B,</subfield> ^ :117: parser error : PCDATA invalid Char value 27 <subfield code="a">$1!3W!:M(B,</subfield> ^ :119: parser error : PCDATA invalid Char value 27 <subfield code="t">$1!3W!:M(B.</subfield> ^ :119: parser error : PCDATA invalid Char value 27 <subfield code="t">$1!3W!:M(B.</subfield> ^ at /usr/share/koha/intranet/cgi-bin/catalogue/showmarc.pl line 76 Apache Server version: Apache/2.2.3 Server built: Apr 16 2008 21:14:34 Koha 3.01.00.002 Koha DB 3.0100002 MySQL mysql Ver 14.12 Distrib 5.0.32, for pc-linux-gnu (x86_64) using readline 5.2 OS Linux sinokoha 2.6.18-6-amd64 #1 SMP Tue Aug 19 04:30:56 UTC 2008 x86_64 GNU/Linux Perl 5.008008

2 1