- Koha - lists.katipo.co.nz

Cataloguing problem on Koha 3
by Irene Sachs 15 Sep '08

15 Sep '08

We have recently installed Koha 3 on Linux and have encountered a problem when adding bibliographic records manually. When using the catalogue module some subfields in certain tags are greyed out and do not allow data to be entered. The tags concerned are: 100, 600 and 700. Also when the record is saved and an item added it can not be located through either the staff search component or using the OPAC despite the fact that when it is issued using the barcode the system recognises the bibliographic details that were entered (minus the greyed out tags). Obviously we seem to have missed a pretty basic setting somewhere. Can anyone help please? _________________________________________________________________ Win a Hotmail Go-Kart to race at Bathurst. Enter today! http://www.livelife.ninemsn.com.au/compIntro.aspx?compId=4602

2 1

CPAN installation Error
by shriram pandey 15 Sep '08

15 Sep '08

Dear List members, i am getting fallowing error during cpan installtion, root@shriram-home:~# cpan We have to reconfigure CPAN.pm due to following uninitialized parameters: cpan_home, keep_source_where, build_dir, build_cache, scan_cache, index_expire, gzip, tar, unzip, make, pager, makepl_arg, make_arg, make_install_arg, urllist, inhibit_startup_message, ftp_proxy, http_proxy, no_proxy, prerequisites_policy, cache_metadata /etc/perl/CPAN/Config.pm initialized. CPAN is the world-wide archive of perl resources. It consists of about 100 sites that all replicate the same contents all around the globe. Many countries have at least one CPAN site already. The resources found on CPAN are easily accessible with the CPAN.pm module. If you want to use CPAN.pm, you have to configure it properly. If you do not want to enter a dialog now, you can answer 'no' to this question and I'll try to autoconfigure. (Note: you can revisit this dialog anytime later by typing 'o conf init' at the cpan prompt.) Are you ready for manual configuration? [yes] The following questions are intended to help you with the configuration. The CPAN module needs a directory of its own to cache important index files and maybe keep a temporary mirror of CPAN files. This may be a site-wide directory or a personal directory. I see you already have a directory /root/.cpan Shall we use it as the general CPAN build and cache directory? CPAN build and cache directory? [/root/.cpan] If you want, I can keep the source files after a build in the cpan home directory. If you choose so then future builds will take the files from there. If you don't want to keep them, answer 0 to the next question. How big should the disk cache be for keeping the build directories with all the intermediate files? Cache size for build directory (in MB)? [10] By default, each time the CPAN module is started, cache scanning is performed to keep the cache size in sync. To prevent from this, disable the cache scanning with 'never'. Perform cache scanning (atstart or never)? [atstart] To considerably speed up the initial CPAN shell startup, it is possible to use Storable to create a cache of metadata. If Storable is not available, the normal index mechanism will be used. Cache metadata (yes/no)? [yes] The next option deals with the charset your terminal supports. In general CPAN is English speaking territory, thus the charset does not matter much, but some of the aliens out there who upload their software to CPAN bear names that are outside the ASCII range. If your terminal supports UTF-8, you say no to the next question, if it supports ISO-8859-1 (also known as LATIN1) then you say yes, and if it supports neither nor, your answer does not matter, you will not be able to read the names of some authors anyway. If you answer no, names will be output in UTF-8. Your terminal expects ISO-8859-1 (yes/no)? [yes] If you have one of the readline packages (Term::ReadLine::Perl, Term::ReadLine::Gnu, possibly others) installed, the interactive CPAN shell will have history support. The next two questions deal with the filename of the history file and with its size. If you do not want to set this variable, please hit SPACE RETURN to the following question. File to save your history? [/root/.cpan/histfile] Number of lines to save? [100] The CPAN module can detect when a module that which you are trying to build depends on prerequisites. If this happens, it can build the prerequisites for you automatically ('follow'), ask you for confirmation ('ask'), or just ignore them ('ignore'). Please set your policy to one of the three values. Policy on building prerequisites (follow, ask or ignore)? [ask] The CPAN module will need a few external programs to work properly. Please correct me, if I guess the wrong path for a program. Don't panic if you do not have some of them, just press ENTER for those. To disable the use of a download program, you can type a space followed by ENTER. Where is your gzip program? [/bin/gzip] Where is your tar program? [/bin/tar] Where is your unzip program? [/usr/bin/unzip] Where is your make program? [/usr/bin/make] Warning: lynx not found in PATH Where is your lynx program? [] /usr/bin/ Where is your wget program? [/usr/bin/wget] Warning: ncftpget not found in PATH Where is your ncftpget program? [] /usr/bin/ncftpget Where is your ftp program? [/usr/bin/ftp] Where is your gpg program? [/usr/bin/gpg] What is your favorite pager program? [/usr/bin/less] What is your favorite shell? [/bin/bash] Every Makefile.PL is run by perl in a separate process. Likewise we run 'make' and 'make install' in processes. If you have any parameters (e.g. PREFIX, LIB, UNINST or the like) you want to pass to the calls, please specify them here. If you don't understand this question, just press ENTER. Parameters for the 'perl Makefile.PL' command? Typical frequently used settings: PREFIX=~/perl non-root users (please see manual for more hints) Your choice: [INSTALLDIRS=site] Parameters for the 'make' command? Typical frequently used setting: -j3 dual processor system Your choice: [] Parameters for the 'make install' command? Typical frequently used setting: UNINST=1 to always uninstall potentially conflicting files Your choice: [] Sometimes you may wish to leave the processes run by CPAN alone without caring about them. As sometimes the Makefile.PL contains question you're expected to answer, you can set a timer that will kill a 'perl Makefile.PL' process after the specified time in seconds. If you set this value to 0, these processes will wait forever. This is the default and recommended setting. Timeout for inactivity during Makefile.PL? [0] If you're accessing the net via proxies, you can specify them in the CPAN configuration or via environment variables. The variable in the $CPAN::Config takes precedence. Your ftp_proxy? proxy2.lnmiit.ac.in Your http_proxy? [http://proxy2.lnmiit.ac.in:3128/] Your no_proxy? localhost, 127.0.0.1,172.22.10.1 If your proxy is an authenticating proxy, you can store your username permanently. If you do not want that, just press RETURN. You will then be asked for your username in every future session. Your proxy user id? 3128 Your password for the authenticating proxy can also be stored permanently on disk. If this violates your security policy, just press RETURN. You will then be asked for the password in every future session. CPAN: Term::ReadKey loaded ok Your proxy password? You have no /root/.cpan/sources/MIRRORED.BY I'm trying to fetch one CPAN: LWP::UserAgent loaded ok Fetching with LWP: ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY Fetching with LWP: ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY.gz CPAN: Net::FTP loaded ok Fetching with Net::FTP: ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY Fetching with Net::FTP ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY.gz root@shriram-home:~# cpan We have to reconfigure CPAN.pm due to following uninitialized parameters: cpan_home, keep_source_where, build_dir, build_cache, scan_cache, index_expire, gzip, tar, unzip, make, pager, makepl_arg, make_arg, make_install_arg, urllist, inhibit_startup_message, ftp_proxy, http_proxy, no_proxy, prerequisites_policy, cache_metadata /etc/perl/CPAN/Config.pm initialized. CPAN is the world-wide archive of perl resources. It consists of about 100 sites that all replicate the same contents all around the globe. Many countries have at least one CPAN site already. The resources found on CPAN are easily accessible with the CPAN.pm module. If you want to use CPAN.pm, you have to configure it properly. If you do not want to enter a dialog now, you can answer 'no' to this question and I'll try to autoconfigure. (Note: you can revisit this dialog anytime later by typing 'o conf init' at the cpan prompt.) Are you ready for manual configuration? [yes] The following questions are intended to help you with the configuration. The CPAN module needs a directory of its own to cache important index files and maybe keep a temporary mirror of CPAN files. This may be a site-wide directory or a personal directory. I see you already have a directory /root/.cpan Shall we use it as the general CPAN build and cache directory? CPAN build and cache directory? [/root/.cpan] If you want, I can keep the source files after a build in the cpan home directory. If you choose so then future builds will take the files from there. If you don't want to keep them, answer 0 to the next question. How big should the disk cache be for keeping the build directories with all the intermediate files? Cache size for build directory (in MB)? [10] By default, each time the CPAN module is started, cache scanning is performed to keep the cache size in sync. To prevent from this, disable the cache scanning with 'never'. Perform cache scanning (atstart or never)? [atstart] To considerably speed up the initial CPAN shell startup, it is possible to use Storable to create a cache of metadata. If Storable is not available, the normal index mechanism will be used. Cache metadata (yes/no)? [yes] The next option deals with the charset your terminal supports. In general CPAN is English speaking territory, thus the charset does not matter much, but some of the aliens out there who upload their software to CPAN bear names that are outside the ASCII range. If your terminal supports UTF-8, you say no to the next question, if it supports ISO-8859-1 (also known as LATIN1) then you say yes, and if it supports neither nor, your answer does not matter, you will not be able to read the names of some authors anyway. If you answer no, names will be output in UTF-8. Your terminal expects ISO-8859-1 (yes/no)? [yes] If you have one of the readline packages (Term::ReadLine::Perl, Term::ReadLine::Gnu, possibly others) installed, the interactive CPAN shell will have history support. The next two questions deal with the filename of the history file and with its size. If you do not want to set this variable, please hit SPACE RETURN to the following question. File to save your history? [/root/.cpan/histfile] Number of lines to save? [100] The CPAN module can detect when a module that which you are trying to build depends on prerequisites. If this happens, it can build the prerequisites for you automatically ('follow'), ask you for confirmation ('ask'), or just ignore them ('ignore'). Please set your policy to one of the three values. Policy on building prerequisites (follow, ask or ignore)? [ask] The CPAN module will need a few external programs to work properly. Please correct me, if I guess the wrong path for a program. Don't panic if you do not have some of them, just press ENTER for those. To disable the use of a download program, you can type a space followed by ENTER. Where is your gzip program? [/bin/gzip] Where is your tar program? [/bin/tar] Where is your unzip program? [/usr/bin/unzip] Where is your make program? [/usr/bin/make] Warning: lynx not found in PATH Where is your lynx program? [] Where is your wget program? [/usr/bin/wget] Warning: ncftpget not found in PATH Where is your ncftpget program? [] /usr/bin/ncftpget Where is your ftp program? [/usr/bin/ftp] Where is your gpg program? [/usr/bin/gpg] What is your favorite pager program? [/usr/bin/less] What is your favorite shell? [/bin/bash] Every Makefile.PL is run by perl in a separate process. Likewise we run 'make' and 'make install' in processes. If you have any parameters (e.g. PREFIX, LIB, UNINST or the like) you want to pass to the calls, please specify them here. If you don't understand this question, just press ENTER. Parameters for the 'perl Makefile.PL' command? Typical frequently used settings: PREFIX=~/perl non-root users (please see manual for more hints) Your choice: [INSTALLDIRS=site] Parameters for the 'make' command? Typical frequently used setting: -j3 dual processor system Your choice: [] Parameters for the 'make install' command? Typical frequently used setting: UNINST=1 to always uninstall potentially conflicting files Your choice: [] Sometimes you may wish to leave the processes run by CPAN alone without caring about them. As sometimes the Makefile.PL contains question you're expected to answer, you can set a timer that will kill a 'perl Makefile.PL' process after the specified time in seconds. If you set this value to 0, these processes will wait forever. This is the default and recommended setting. Timeout for inactivity during Makefile.PL? [0] If you're accessing the net via proxies, you can specify them in the CPAN configuration or via environment variables. The variable in the $CPAN::Config takes precedence. Your ftp_proxy? 172.22.0.66 Your http_proxy? [http://proxy2.lnmiit.ac.in:3128/] Your no_proxy? localhost,127.0.0.1,172.22.10.1 If your proxy is an authenticating proxy, you can store your username permanently. If you do not want that, just press RETURN. You will then be asked for your username in every future session. Your proxy user id? shriram Your password for the authenticating proxy can also be stored permanently on disk. If this violates your security policy, just press RETURN. You will then be asked for the password in every future session. CPAN: Term::ReadKey loaded ok Your proxy password? You have no /root/.cpan/sources/MIRRORED.BY I'm trying to fetch one CPAN: LWP::UserAgent loaded ok Fetching with LWP: ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY Fetching with LWP: ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY.gz CPAN: Net::FTP loaded ok Fetching with Net::FTP: ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY Fetching with Net::FTP ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY.gz Trying with "/usr/bin/ncftpget" to get ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY sh: /usr/bin/ncftpget: not found Trying with "/usr/bin/ncftpget" to get ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY.gz sh: /usr/bin/ncftpget: not found Trying with "/usr/bin/wget -O -" to get ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY --12:30:16-- ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY => `-' Connecting to 172.22.0.66:80... connected. Proxy request sent, awaiting response... 404 Not Found 12:30:16 ERROR 404: Not Found. Trying with "/usr/bin/wget -O -" to get ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY.gz --12:30:16-- ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY.gz => `-' Connecting to 172.22.0.66:80... connected. Proxy request sent, awaiting response... 404 Not Found 12:30:16 ERROR 404: Not Found. Issuing "/usr/bin/ftp -n" ftp: connect to address 194.159.255.135: Connection timed out Trying 69.31.115.210... ftp: connect: Connection timed out Not connected. Local directory now /root/.cpan/sources Not connected. Not connected. Not connected. Not connected. Not connected. Bad luck... Still failed! Can't access URL ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY. Please check, if the URLs I found in your configuration file () are valid. The urllist can be edited. E.g. with 'o conf urllist push ftp://myurl/' Could not fetch MIRRORED.BY CPAN.pm needs at least one URL where it can fetch CPAN files from. Please enter your CPAN site: [] ----------------------------------------- Any suggestion would be highly appreciated. -- Shri Ram Pandey IKM Trainee NCSI,Indian Institute Of Science,Bangalore Official mail: shriram(a)ncsi.iisc.ernet.in

2 1

Barcoding error in Koha 2.2.9 -Windows
by Mitali Phatarpekar 15 Sep '08

15 Sep '08

I get following error while printing barcodes: "[Sat Sep 13 16:03:06 2008] [error] [client 127.0.0.1] Premature end of script headers: barcodesGenerator.pl, referer: http://intranet/cgi-bin/koha/barcodes/barcodes.pl [Sat Sep 13 16:03:06 2008] [error] [client 127.0.0.1] Unable to open /tmp/544586-127.0.0.1-(From to )-[13.9.2008]-[16:3:6].pdf for writing at C:/usr/site/lib/PDF/API2/Basic/PDF/File.pm line 511., referer: http://intranet/cgi-bin/koha/barcodes/barcodes.pl " Please Help. Mitali

2 1

z39.50 searching - Permanent system error
by Max Crowe 15 Sep '08

15 Sep '08

Hi: I'm having trouble when I do z39.50 searching. Certain servers-- the New York Public Library [catnyp.nypl.org] or the Aurora Public Library [ odyssey.aurora.lib.co.us] for example-- will yield hits for results, but then only give me the message: 1: Permanent system error: Permanent system error: Bib-1 I don't know that this is a bug, really, but I'm trying to figure out exactly what is happening. Question one: what does this error actually mean? It seems to occur consistently for certain searches (ISBN-13 978-1-59722-733-9, for example gives me the error for both Aurora and the NYP consistently) while other searches can run through the same servers without a hitch. Is the "system" error my system, or theirs? Or is there some sort of compatibility issue? Two: beyond figuring out what's happening, I ideally would love to be able use z39.50 with these systems-- are other libraries able to accomplish this? Anyone else experienced this issue? There seem to be lots of servers that yield this error message-- I just listed these two as an example. (Incidentially, I'm using Koha 3.00.00.107) Max Crowe Library Director New Durham Public Library

4 6

Limits are killing the search
by Beda Szukics 15 Sep '08

15 Sep '08

Hi If I try to limit my search by itemtypes or location the result is zero. Why so? You can test it yourself at http://schulbibliothek.ksobwalden.ch There are a lot of messages in koha-opac-error-log: [Fri Sep 05 19:22:03 2008] [error] [client 83.79.191.6] [Fri Sep 5 19:22:03 2008] opac-search.pl: leftresult : 641,zeittafelz-1;643,ideeundges-1;1010,frauenumgo-1;1279,goetheundg-1;1722,goetheeine-1;1887,meinlebene-1;3140,johannwolf-1;4524,dasewigwei-1;5334,aufkl\xc3\xa4rung-1;4975,historisch-1;4974,mythischeg-1;5191,balladenh\xc3\xb6-1;5683,manzgrosse-1;5188,stundenbl\xc3\xa4-1;5201,stundenbl\xc3\xa4-1;4962,diedeutsch-1;5622,dasdeutsch-1;5612,1000deutsc-1;5621,diedeutsch-1;5619,deutschero-1;5334,gedichteun-1;4960,geschichte-1;4969,imurteilde-1;4971,deutscheer-1;4970,deutschero-1;5523,interpreta-1;5297,lyriknach1-1;5298,naturlyrik-1;5615,wegezumged-1;5516,wegezurerz-1;5335,klassikund-1;5544,goetheharz-2;5326,johannwolf-1;5128,johannwolf-1;5327,johannwolf-1;5315,johannwolf-1;5319,johannwolf-1;5322,johannwolf-1;5521,erl\xc3\xa4uterun-1;5639,johannwolf-1;5166,goethesged-1;5107,johannwolf-1;5182,stundenbl\xc3\xa4-1;6018,johannwolf-1;172,s\xc3\xa4mtlichew-2;1342,faust-2;1343,dieleidesd-2;1498,diereisen/-2;3139,faust-2;3634,goetheswer-1;3635,s\xc3\xa4mtlicheg-2;3650,sturmunddr-1;4523,diewahlver-1;4654,faust/-1;5266,faust-2;5267,faust-2;5166,goethesged-1;172,s\xc3\xa4mtlichew-2;3650,sturmunddr-1;5612,1000deutsc-1;643,ideeundges-1;1010,frauenumgo-1;1279,goetheundg-1;1722,goetheeine-1;1887,meinlebene-1;3140,johannwolf-1;4524,dasewigwei-1;5544,goetheharz-2;5326,johannwolf-1;5128,johannwolf-1;5327,johannwolf-1;5315,johannwolf-1;5319,johannwolf-1;5322,johannwolf-1;5521,erl\xc3\xa4uterun-1;5639,johannwolf-1;5107,johannwolf-1;6018,johannwolf-1; at /usr/share/koha/lib/C4/Search.pm line 1651., referer: http://bibliothek.ksobwalden.ch/cgi-bin/koha/opac-search.pl [Fri Sep 05 19:22:03 2008] [error] [client 83.79.191.6] [Fri Sep 5 19:22:03 2008] opac-search.pl: rightresult : at /usr/share/koha/lib/C4/Search.pm line 1652., referer: http://bibliothek.ksobwalden.ch/cgi-bin/koha/opac-search.pl [Fri Sep 05 19:22:03 2008] [error] [client 83.79.191.6] [Fri Sep 5 19:22:03 2008] opac-search.pl: NZAND at /usr/share/koha/lib/C4/Search.pm line 1657., referer: http://bibliothek.ksobwalden.ch/cgi-bin/koha/opac-search.pl [Fri Sep 05 19:22:03 2008] [error] [client 83.79.191.6] [Fri Sep 5 19:22:03 2008] opac-search.pl: / 641,zeittafelz-1;643,ideeundges-1;1010,frauenumgo-1;1279,goetheundg-1;1722,goetheeine-1;1887,meinlebene-1;3140,johannwolf-1;4524,dasewigwei-1;5334,aufkl\xc3\xa4rung-1;4975,historisch-1;4974,mythischeg-1;5191,balladenh\xc3\xb6-1;5683,manzgrosse-1;5188,stundenbl\xc3\xa4-1;5201,stundenbl\xc3\xa4-1;4962,diedeutsch-1;5622,dasdeutsch-1;5612,1000deutsc-1;5621,diedeutsch-1;5619,deutschero-1;5334,gedichteun-1;4960,geschichte-1;4969,imurteilde-1;4971,deutscheer-1;4970,deutschero-1;5523,interpreta-1;5297,lyriknach1-1;5298,naturlyrik-1;5615,wegezumged-1;5516,wegezurerz-1;5335,klassikund-1;5544,goetheharz-2;5326,johannwolf-1;5128,johannwolf-1;5327,johannwolf-1;5315,johannwolf-1;5319,johannwolf-1;5322,johannwolf-1;5521,erl\xc3\xa4uterun-1;5639,johannwolf-1;5166,goethesged-1;5107,johannwolf-1;5182,stundenbl\xc3\xa4-1;6018,johannwolf-1;172,s\xc3\xa4mtlichew-2;1342,faust-2;1343,dieleidesd-2;1498,diereisen/-2;3139,faust-2;3634,goetheswer-1;3635,s\xc3\xa4mtlicheg-2;3650,sturmunddr-1;4523,diewahlver-1;4654,faust/-1;5266,faust-2;5267,faust-2;5166,goethesged-1;172,s\xc3\xa4mtlichew-2;3650,sturmunddr-1;5612,1000deutsc-1;643,ideeundges-1;1010,frauenumgo-1;1279,goetheundg-1;1722,goetheeine-1;1887,meinlebene-1;3140,johannwolf-1;4524,dasewigwei-1;5544,goetheharz-2;5326,johannwolf-1;5128,johannwolf-1;5327,johannwolf-1;5315,johannwolf-1;5319,johannwolf-1;5322,johannwolf-1;5521,erl\xc3\xa4uterun-1;5639,johannwolf-1;5107,johannwolf-1;6018,johannwolf-1; , referer: http://bibliothek.ksobwalden.ch/cgi-bin/koha/opac-search.pl [Fri Sep 05 19:22:03 2008] [error] [client 83.79.191.6] [Fri Sep 5 19:22:03 2008] opac-search.pl: NZAND DONE : , referer: http://bibliothek.ksobwalden.ch/cgi-bin/koha/opac-search.pl [Fri Sep 05 19:22:03 2008] [error] [client 83.79.191.6] [Fri Sep 5 19:22:03 2008] opac-search.pl: results = at /usr/share/koha/lib/C4/Search.pm line 1558., referer: http://bibliothek.ksobwalden.ch/cgi-bin/koha/opac-search.pl [Fri Sep 05 19:22:03 2008] [error] [client 83.79.191.6] [Fri Sep 5 19:22:03 2008] opac-search.pl: biblionumbers = and ordering = relevance, referer: http://bibliothek.ksobwalden.ch/cgi-bin/koha/opac-search.pl [Fri Sep 05 19:22:03 2008] [error] [client 83.79.191.6] File does not exist: /usr/share/koha/opac/htdocs/intranet-tmpl, referer: http://bibliothek.ksobwalden.ch/cgi-bin/koha/opac-search.pl?idx=kw&q=Goethe… [Fri Sep 05 19:22:04 2008] [error] [client 83.79.191.6] File does not exist: /usr/share/koha/opac/htdocs/intranet-tmpl, referer: http://bibliothek.ksobwalden.ch/cgi-bin/koha/opac-search.pl?idx=kw&q=Goethe… [Fri Sep 05 19:22:05 2008] [error] [client 83.79.191.6] File does not exist: /usr/share/koha/opac/htdocs/intranet-tmpl, referer: http://bibliothek.ksobwalden.ch/cgi-bin/koha/opac-search.pl?idx=kw&q=Goethe… koha@web-kso1:/var/log/koha$ less koha-opac-error_log [Fri Sep 05 19:21:49 2008] [error] [client 83.79.191.6] File does not exist: /usr/share/koha/opac/htdocs/intranet -tmpl, referer: http://bibliothek.ksobwalden.ch/cgi-bin/koha/opac-search.pl [Fri Sep 05 19:21:50 2008] [error] [client 83.79.191.6] File does not exist: /usr/share/koha/opac/htdocs/intranet -tmpl, referer: http://bibliothek.ksobwalden.ch/cgi-bin/koha/opac-search.pl [Fri Sep 05 19:22:03 2008] [error] [client 83.79.191.6] [Fri Sep 5 19:22:03 2008] opac-search.pl: ---------, ref erer: http://bibliothek.ksobwalden.ch/cgi-bin/koha/opac-search.pl [Fri Sep 05 19:22:03 2008] [error] [client 83.79.191.6] [Fri Sep 5 19:22:03 2008] opac-search.pl: Enter buildQue ry, referer: http://bibliothek.ksobwalden.ch/cgi-bin/koha/opac-search.pl [Fri Sep 05 19:22:03 2008] [error] [client 83.79.191.6] [Fri Sep 5 19:22:03 2008] opac-search.pl: --------- at / usr/share/koha/lib/C4/Search.pm line 863., referer: http://bibliothek.ksobwalden.ch/cgi-bin/koha/opac-search.pl [Fri Sep 05 19:22:03 2008] [error] [client 83.79.191.6] [Fri Sep 5 19:22:03 2008] opac-search.pl: TRUNCATION: NO N:>Goethe< RIGHT:>< LEFT:>< RIGHTLEFT:>< REGEX:>< at /usr/share/koha/lib/C4/Search.pm line 1000., referer: http:/ /bibliothek.ksobwalden.ch/cgi-bin/koha/opac-search.pl [Fri Sep 05 19:22:03 2008] [error] [client 83.79.191.6] [Fri Sep 5 19:22:03 2008] opac-search.pl: TRUNCATED OPER AND: >< at /usr/share/koha/lib/C4/Search.pm line 1041., referer: http://bibliothek.ksobwalden.ch/cgi-bin/koha/opa c-search.pl [Fri Sep 05 19:22:03 2008] [error] [client 83.79.191.6] [Fri Sep 5 19:22:03 2008] opac-search.pl: STEMMED OPERAN D: >< at /usr/share/koha/lib/C4/Search.pm line 1047., referer: http://bibliothek.ksobwalden.ch/cgi-bin/koha/opac- search.pl [Fri Sep 05 19:22:03 2008] [error] [client 83.79.191.6] [Fri Sep 5 19:22:03 2008] opac-search.pl: FIELD WEIGHTED OPERAND: >< at /usr/share/koha/lib/C4/Search.pm line 1054., referer: http://bibliothek.ksobwalden.ch/cgi-bin/koh a/opac-search.pl [Fri Sep 05 19:22:03 2008] [error] [client 83.79.191.6] [Fri Sep 5 19:22:03 2008] opac-search.pl: QUERY BEFORE L IMITS: > kw,wrdl: Goethe< at /usr/share/koha/lib/C4/Search.pm line 1098., referer: http://bibliothek.ksobwalden.c h/cgi-bin/koha/opac-search.pl [Fri Sep 05 19:22:03 2008] [error] [client 83.79.191.6] [Fri Sep 5 19:22:03 2008] opac-search.pl: QUERY:kw,wrdl= Goethe and (mc-itype=BUCH) at /usr/share/koha/lib/C4/Search.pm line 1161., referer: http://bibliothek.ksobwalden .ch/cgi-bin/koha/opac-search.pl [Fri Sep 05 19:22:03 2008] [error] [client 83.79.191.6] [Fri Sep 5 19:22:03 2008] opac-search.pl: QUERY CGI:idx= kw&q=Goethe at /usr/share/koha/lib/C4/Search.pm line 1162., referer: http://bibliothek.ksobwalden.ch/cgi-bin/koha /opac-search.pl [Fri Sep 05 19:22:03 2008] [error] [client 83.79.191.6] [Fri Sep 5 19:22:03 2008] opac-search.pl: QUERY DESC:kw, wrdl: Goethe at /usr/share/koha/lib/C4/Search.pm line 1163., referer: http://bibliothek.ksobwalden.ch/cgi-bin/koh a/opac-search.pl [Fri Sep 05 19:22:03 2008] [error] [client 83.79.191.6] [Fri Sep 5 19:22:03 2008] opac-search.pl: LIMIT:and (mc- itype=BUCH) at /usr/share/koha/lib/C4/Search.pm line 1164., referer: http://bibliothek.ksobwalden.ch/cgi-bin/koha /opac-search.pl [Fri Sep 05 19:22:03 2008] [error] [client 83.79.191.6] [Fri Sep 5 19:22:03 2008] opac-search.pl: LIMIT CGI:&lim it=mc-itype:BUCH at /usr/share/koha/lib/C4/Search.pm line 1165., referer: http://bibliothek.ksobwalden.ch/cgi-bin What is wrong here? By Beda

2 2

Re: [Koha] regarding importing of marc records
by Ata ur Rehman 15 Sep '08

15 Sep '08

Dear Vijay Kumar I am pasting your records (vijay.mrc file) here for inline comments: Regards, Ata LISolutions.org Your posted file vijay.mrc is not an mrc file. It is .mrk file and you have to convert it into .mrc using marcedit before importing it into Koha =LDR 00000nam a2200000Ia 45e0 Replace all 45e0 value with 4500 before converting this file to .mrc =008 080915s9999\\\\xx\\\\\\\\\\\\000\0\und\d =082 \\$a681.32.06$bKER =100 \\0$aKERNIGHAN(Brian W) & PIKE(R)1$aPIKE(R) 100 tag is not repeatable according to MARC21 standard, So you can not use more than one $a values in 100. For multiple authors you have to use 750$a (Added entry for personal names) =245 \\$aThe Unix programmming environment =260 \\$aNew Jersey$bPrentice- Hall$c1984 =300 \\$ax+357$fJune'95 300$f is for Type of Unit, but you have mentioned some date here. Use standard 300$a, $b and $c =440 \\$aPrentice- Hall Software Series =850 \\$aRRI I don't know what is 850 $a (If it is some hodling information, you have to use 942 tag) =999 \\$1003 999$1 is not defined in Koha (I am using Koha 2). If it is some local number denoting items, then you have to mention it in 952 =LDR 00000nam a2200000Ia 45e0 =008 080915s9999\\\\xx\\\\\\\\\\\\000\0\und\d =082 \\$a524.7(063)$bSAN-7 =100 \\0$aSANTA CRUZ WORKSHOP ON ASTROPHYSICS(7th1$aMILLER(Joseph H) =245 \\$a"Astrophysics of active galaxies and quasi-stellar objects.Proceedings of the 7th Santa Cruz workshop onAstrophysics, California, USA, July 16-27, 1984" =260 \\$aOxford$bOxford University Press$c1985 =300 \\$a519$fJune'95 =850 \\$aRRI =999 \\$1002 =LDR 00000nam a2200000Ia 45e0 =008 080915s9999\\\\xx\\\\\\\\\\\\000\0\und\d =082 \\$a54$bSIE =100 \\0$aSIENKO(Michell J) & PLANE(Robert A)1$aPLANE(Robert A) =245 \\$aChemistry =260 \\$aNew York$bMcGraw-Hill$c1966 =300 \\$a1+623$fHBK =850 \\$aRRI =999 \\$1001 =LDR 00000nam a2200000Ia 45e0 =008 080915s9999\\\\xx\\\\\\\\\\\\000\0\und\d =082 \\$a52(091)(540)$bDIK =100 \\0$aDIKSHIT(S B)1$aVAIDYA(R V) Tr =245 \\$aBharatiya jyotish sastra (History of Indian Astronomy) =260 \\$aDelhi$bGovt. of India Press$c1969 =300 \\$axxxiv+147$fRaman Collection =650 \\0$a<astronomy ><vedic-astronomy ><history-of-astronomy><indian-astronomy ><> =850 \\$aRRI =999 \\$1000 On Sun, Sep 14, 2008 at 4:57 PM, vijay kumar <vijcrjbhu(a)gmail.com> wrote: > Dear Sir, > Sorry for writing to you personally, I got your emailId through koha > mailing list. > Myself vijay from INDIA and I have more than 2,00,000 records to > import. I am using koha3 > I have problem regarding importing of marc records in koha, > first i have converted a simple text file into marc through MarcEdit. > During importing I am not getting any error and I am able to see all > fields in OPAC as well as in staff-client. > > 1)But problem is I am not able to see subject added entry for a record > in OPAC,it only shows subjects :<> > so when I click on <> > shows subject entry as a pop-up windows > I am using 650$a for subject adeed entry. > > 2)second if i have more than 2 authors than how i mentioned marc tag > for each author name > 3) how can i use this tag 999$c > > For sample, I attached two file > > > Title:245$a 245$c > Author:100$a Author:100$c > Edition:250$a Place of publication:260$a Publisher:260$b > Year:260$c > Pagination 300$a > Series Title:440$a > type of materials:300$f Type of material can be given at 245$h or in 942 (holding information) > > ISBN:020$a > classification:082$a 080$b > local no:999$c > subjectadded entry:650$a > holding:850$a > > I am very thankful to you for this kindly help, > > With regrads, > vijay kumar > bangalore >

1 0

marc tag for keyword, Accession number
by vijay kumar 14 Sep '08

14 Sep '08

Dear Member, I have to convert text file into marc tag, I would like to know the exact marc tag equivalent for field "general keyword " so that it can be searched by following keyword in OPAC. I used 650$a for equivalent to keyword. But it was not showing in my OPAC. And Second, what should be the best tag equivalent to accession number in koha 3. Thanking You, With Regards, vijay kumar NCSI,IISc Bangalore

2 1

Fwd: CPAN installation Error
by Joe Atzberger 14 Sep '08

14 Sep '08

---------- Forwarded message ---------- From: Joe Atzberger <ohiocore(a)gmail.com> Date: Sun, Sep 14, 2008 at 2:13 PM Subject: Re: [Koha] CPAN installation Error To: shriram pandey <ram.mlib(a)gmail.com> It looks like you have very limited internet connection during your CPAN operations, so it fails to retrieve files it needs. This is probably related to the configuration of your proxy. I recommend connecting directly (without the proxy) until you get the basic setup complete. Otherwise manually key in a known mirror or two that you want to use, or download the mirror list yourself and copy it to /root/.cpan/sources/ MIRRORED.BY <http://mirrored.by/> --Joe Atzberger On Sun, Sep 14, 2008 at 3:16 AM, shriram pandey <ram.mlib(a)gmail.com> wrote: > Dear List members, > i am getting fallowing error during cpan installtion, > > root@shriram-home:~# cpan > We have to reconfigure CPAN.pm due to following uninitialized parameters: > > cpan_home, keep_source_where, build_dir, build_cache, scan_cache, > index_expire, gzip, tar, unzip, make, pager, makepl_arg, make_arg, > make_install_arg, urllist, inhibit_startup_message, ftp_proxy, > http_proxy, no_proxy, prerequisites_policy, cache_metadata > > /etc/perl/CPAN/Config.pm initialized. > > > CPAN is the world-wide archive of perl resources. It consists of about > 100 sites that all replicate the same contents all around the globe. > Many countries have at least one CPAN site already. The resources > found on CPAN are easily accessible with the CPAN.pm module. If you > want to use CPAN.pm, you have to configure it properly. > > If you do not want to enter a dialog now, you can answer 'no' to this > question and I'll try to autoconfigure. (Note: you can revisit this > dialog anytime later by typing 'o conf init' at the cpan prompt.) > > Are you ready for manual configuration? [yes] > > > The following questions are intended to help you with the > configuration. The CPAN module needs a directory of its own to cache > important index files and maybe keep a temporary mirror of CPAN files. > This may be a site-wide directory or a personal directory. > > > > I see you already have a directory > /root/.cpan > Shall we use it as the general CPAN build and cache directory? > > CPAN build and cache directory? [/root/.cpan] > > > If you want, I can keep the source files after a build in the cpan > home directory. If you choose so then future builds will take the > files from there. If you don't want to keep them, answer 0 to the > next question. > > > > How big should the disk cache be for keeping the build directories > with all the intermediate files? > > Cache size for build directory (in MB)? [10] > > > By default, each time the CPAN module is started, cache scanning > is performed to keep the cache size in sync. To prevent from this, > disable the cache scanning with 'never'. > > Perform cache scanning (atstart or never)? [atstart] > > > To considerably speed up the initial CPAN shell startup, it is > possible to use Storable to create a cache of metadata. If Storable > is not available, the normal index mechanism will be used. > > Cache metadata (yes/no)? [yes] > > > The next option deals with the charset your terminal supports. In > general CPAN is English speaking territory, thus the charset does not > matter much, but some of the aliens out there who upload their > software to CPAN bear names that are outside the ASCII range. If your > terminal supports UTF-8, you say no to the next question, if it > supports ISO-8859-1 (also known as LATIN1) then you say yes, and if it > supports neither nor, your answer does not matter, you will not be > able to read the names of some authors anyway. If you answer no, names > will be output in UTF-8. > > Your terminal expects ISO-8859-1 (yes/no)? [yes] > > > If you have one of the readline packages (Term::ReadLine::Perl, > Term::ReadLine::Gnu, possibly others) installed, the interactive CPAN > shell will have history support. The next two questions deal with the > filename of the history file and with its size. If you do not want to > set this variable, please hit SPACE RETURN to the following question. > > File to save your history? [/root/.cpan/histfile] > Number of lines to save? [100] > > > The CPAN module can detect when a module that which you are trying to > build depends on prerequisites. If this happens, it can build the > prerequisites for you automatically ('follow'), ask you for > confirmation ('ask'), or just ignore them ('ignore'). Please set your > policy to one of the three values. > > Policy on building prerequisites (follow, ask or ignore)? [ask] > > > The CPAN module will need a few external programs to work properly. > Please correct me, if I guess the wrong path for a program. Don't > panic if you do not have some of them, just press ENTER for those. To > disable the use of a download program, you can type a space followed > by ENTER. > > Where is your gzip program? [/bin/gzip] > Where is your tar program? [/bin/tar] > Where is your unzip program? [/usr/bin/unzip] > Where is your make program? [/usr/bin/make] > Warning: lynx not found in PATH > Where is your lynx program? [] /usr/bin/ > Where is your wget program? [/usr/bin/wget] > Warning: ncftpget not found in PATH > Where is your ncftpget program? [] /usr/bin/ncftpget > Where is your ftp program? [/usr/bin/ftp] > Where is your gpg program? [/usr/bin/gpg] > What is your favorite pager program? [/usr/bin/less] > What is your favorite shell? [/bin/bash] > > > Every Makefile.PL is run by perl in a separate process. Likewise we > run 'make' and 'make install' in processes. If you have any > parameters (e.g. PREFIX, LIB, UNINST or the like) you want to pass > to the calls, please specify them here. > > If you don't understand this question, just press ENTER. > > Parameters for the 'perl Makefile.PL' command? > Typical frequently used settings: > > PREFIX=~/perl non-root users (please see manual for more hints) > > Your choice: [INSTALLDIRS=site] > Parameters for the 'make' command? > Typical frequently used setting: > > -j3 dual processor system > > Your choice: [] > Parameters for the 'make install' command? > Typical frequently used setting: > > UNINST=1 to always uninstall potentially conflicting files > > Your choice: [] > > > Sometimes you may wish to leave the processes run by CPAN alone > without caring about them. As sometimes the Makefile.PL contains > question you're expected to answer, you can set a timer that will > kill a 'perl Makefile.PL' process after the specified time in seconds. > > If you set this value to 0, these processes will wait forever. This is > the default and recommended setting. > > Timeout for inactivity during Makefile.PL? [0] > > > If you're accessing the net via proxies, you can specify them in the > CPAN configuration or via environment variables. The variable in > the $CPAN::Config takes precedence. > > Your ftp_proxy? proxy2.lnmiit.ac.in > Your http_proxy? [http://proxy2.lnmiit.ac.in:3128/] > Your no_proxy? localhost, 127.0.0.1,172.22.10.1 > > > If your proxy is an authenticating proxy, you can store your username > permanently. If you do not want that, just press RETURN. You will then > be asked for your username in every future session. > > Your proxy user id? 3128 > > > Your password for the authenticating proxy can also be stored > permanently on disk. If this violates your security policy, just press > RETURN. You will then be asked for the password in every future > session. > > CPAN: Term::ReadKey loaded ok > Your proxy password? > > You have no /root/.cpan/sources/MIRRORED.BY > I'm trying to fetch one > CPAN: LWP::UserAgent loaded ok > Fetching with LWP: > ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY > Fetching with LWP: > ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY.gz > CPAN: Net::FTP loaded ok > Fetching with Net::FTP: > ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY > Fetching with Net::FTP > ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY.gz > > root@shriram-home:~# cpan > We have to reconfigure CPAN.pm due to following uninitialized parameters: > > cpan_home, keep_source_where, build_dir, build_cache, scan_cache, > index_expire, gzip, tar, unzip, make, pager, makepl_arg, make_arg, > make_install_arg, urllist, inhibit_startup_message, ftp_proxy, > http_proxy, no_proxy, prerequisites_policy, cache_metadata > > /etc/perl/CPAN/Config.pm initialized. > > > > CPAN is the world-wide archive of perl resources. It consists of about > 100 sites that all replicate the same contents all around the globe. > Many countries have at least one CPAN site already. The resources > found on CPAN are easily accessible with the CPAN.pm module. If you > want to use CPAN.pm, you have to configure it properly. > > If you do not want to enter a dialog now, you can answer 'no' to this > question and I'll try to autoconfigure. (Note: you can revisit this > dialog anytime later by typing 'o conf init' at the cpan prompt.) > > Are you ready for manual configuration? [yes] > > The following questions are intended to help you with the > configuration. The CPAN module needs a directory of its own to cache > important index files and maybe keep a temporary mirror of CPAN files. > This may be a site-wide directory or a personal directory. > > > > I see you already have a directory > /root/.cpan > Shall we use it as the general CPAN build and cache directory? > > CPAN build and cache directory? [/root/.cpan] > > > If you want, I can keep the source files after a build in the cpan > home directory. If you choose so then future builds will take the > files from there. If you don't want to keep them, answer 0 to the > next question. > > > > How big should the disk cache be for keeping the build directories > with all the intermediate files? > > Cache size for build directory (in MB)? [10] > > > By default, each time the CPAN module is started, cache scanning > is performed to keep the cache size in sync. To prevent from this, > disable the cache scanning with 'never'. > > Perform cache scanning (atstart or never)? [atstart] > > > To considerably speed up the initial CPAN shell startup, it is > possible to use Storable to create a cache of metadata. If Storable > is not available, the normal index mechanism will be used. > > Cache metadata (yes/no)? [yes] > > > The next option deals with the charset your terminal supports. In > general CPAN is English speaking territory, thus the charset does not > matter much, but some of the aliens out there who upload their > software to CPAN bear names that are outside the ASCII range. If your > terminal supports UTF-8, you say no to the next question, if it > supports ISO-8859-1 (also known as LATIN1) then you say yes, and if it > supports neither nor, your answer does not matter, you will not be > able to read the names of some authors anyway. If you answer no, names > will be output in UTF-8. > > Your terminal expects ISO-8859-1 (yes/no)? [yes] > > > If you have one of the readline packages (Term::ReadLine::Perl, > Term::ReadLine::Gnu, possibly others) installed, the interactive CPAN > shell will have history support. The next two questions deal with the > filename of the history file and with its size. If you do not want to > set this variable, please hit SPACE RETURN to the following question. > > File to save your history? [/root/.cpan/histfile] > Number of lines to save? [100] > > > The CPAN module can detect when a module that which you are trying to > build depends on prerequisites. If this happens, it can build the > prerequisites for you automatically ('follow'), ask you for > confirmation ('ask'), or just ignore them ('ignore'). Please set your > policy to one of the three values. > > Policy on building prerequisites (follow, ask or ignore)? [ask] > > > The CPAN module will need a few external programs to work properly. > Please correct me, if I guess the wrong path for a program. Don't > panic if you do not have some of them, just press ENTER for those. To > disable the use of a download program, you can type a space followed > by ENTER. > > Where is your gzip program? [/bin/gzip] > Where is your tar program? [/bin/tar] > Where is your unzip program? [/usr/bin/unzip] > Where is your make program? [/usr/bin/make] > Warning: lynx not found in PATH > Where is your lynx program? [] > Where is your wget program? [/usr/bin/wget] > Warning: ncftpget not found in PATH > Where is your ncftpget program? [] /usr/bin/ncftpget > Where is your ftp program? [/usr/bin/ftp] > Where is your gpg program? [/usr/bin/gpg] > What is your favorite pager program? [/usr/bin/less] > What is your favorite shell? [/bin/bash] > > > Every Makefile.PL is run by perl in a separate process. Likewise we > run 'make' and 'make install' in processes. If you have any > parameters (e.g. PREFIX, LIB, UNINST or the like) you want to pass > to the calls, please specify them here. > > If you don't understand this question, just press ENTER. > > Parameters for the 'perl Makefile.PL' command? > Typical frequently used settings: > > PREFIX=~/perl non-root users (please see manual for more hints) > > Your choice: [INSTALLDIRS=site] > Parameters for the 'make' command? > Typical frequently used setting: > > -j3 dual processor system > > Your choice: [] > Parameters for the 'make install' command? > Typical frequently used setting: > > UNINST=1 to always uninstall potentially conflicting files > > Your choice: [] > > > Sometimes you may wish to leave the processes run by CPAN alone > without caring about them. As sometimes the Makefile.PL contains > question you're expected to answer, you can set a timer that will > kill a 'perl Makefile.PL' process after the specified time in seconds. > > If you set this value to 0, these processes will wait forever. This is > the default and recommended setting. > > Timeout for inactivity during Makefile.PL? [0] > > > If you're accessing the net via proxies, you can specify them in the > CPAN configuration or via environment variables. The variable in > the $CPAN::Config takes precedence. > > Your ftp_proxy? 172.22.0.66 > Your http_proxy? [http://proxy2.lnmiit.ac.in:3128/] > Your no_proxy? localhost,127.0.0.1,172.22.10.1 > > > If your proxy is an authenticating proxy, you can store your username > permanently. If you do not want that, just press RETURN. You will then > be asked for your username in every future session. > > Your proxy user id? shriram > > > Your password for the authenticating proxy can also be stored > permanently on disk. If this violates your security policy, just press > RETURN. You will then be asked for the password in every future > session. > > CPAN: Term::ReadKey loaded ok > Your proxy password? > > You have no /root/.cpan/sources/MIRRORED.BY > I'm trying to fetch one > CPAN: LWP::UserAgent loaded ok > Fetching with LWP: > ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY > Fetching with LWP: > ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY.gz > CPAN: Net::FTP loaded ok > Fetching with Net::FTP: > ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY > Fetching with Net::FTP > ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY.gz > > Trying with "/usr/bin/ncftpget" to get > ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY > sh: /usr/bin/ncftpget: not found > > Trying with "/usr/bin/ncftpget" to get > ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY.gz > sh: /usr/bin/ncftpget: not found > > Trying with "/usr/bin/wget -O -" to get > ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY > --12:30:16-- <ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY--12:30:16--> > ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY > => `-' > Connecting to 172.22.0.66:80... connected. > Proxy request sent, awaiting response... 404 Not Found > 12:30:16 ERROR 404: Not Found. > > > Trying with "/usr/bin/wget -O -" to get > ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY.gz > --12:30:16-- <ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY.gz--12:30:16--> > ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY.gz > => `-' > Connecting to 172.22.0.66:80... connected. > Proxy request sent, awaiting response... 404 Not Found > 12:30:16 ERROR 404: Not Found. > > Issuing "/usr/bin/ftp -n" > ftp: connect to address 194.159.255.135: Connection timed out > Trying 69.31.115.210... > ftp: connect: Connection timed out > Not connected. > Local directory now /root/.cpan/sources > Not connected. > Not connected. > Not connected. > Not connected. > Not connected. > Bad luck... Still failed! > Can't access URL ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY. > > Please check, if the URLs I found in your configuration file () are valid. > The urllist can be edited. E.g. with 'o conf urllist push ftp://myurl/' > > Could not fetch MIRRORED.BY > CPAN.pm needs at least one URL where it can fetch CPAN files from. > > Please enter your CPAN site: [] > > ----------------------------------------- > > Any suggestion would be highly appreciated. > > -- > Shri Ram Pandey > IKM Trainee > NCSI,Indian Institute Of Science,Bangalore > Official mail: shriram(a)ncsi.iisc.ernet.in > _______________________________________________ > Koha mailing list > Koha(a)lists.katipo.co.nz > http://lists.katipo.co.nz/mailman/listinfo/koha >

1 0

Calculating Fines
by Mitali Phatarpekar 14 Sep '08

14 Sep '08

How to calculate fines in Koha 2.2.9.(Windows).What is crontab????? Mitali

2 1

CPAN installation Error
by shriram pandey 14 Sep '08

14 Sep '08

Hello List, I have installed koha3 many times on ubuntu8.04 , but now i am getting error during cpan installation. it shows the fallowing error and does not fetch mirror sites... -------------------------------------------------------- CPAN: Term::ReadKey loaded ok Your proxy password? You have no /root/.cpan/sources/MIRRORED.BY I'm trying to fetch one CPAN: LWP::UserAgent loaded ok Fetching with LWP: ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY Fetching with LWP: ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY.gz CPAN: Net::FTP loaded ok Fetching with Net::FTP: ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY Fetching with Net::FTP ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY.gz Trying with "/usr/bin/ncftpget" to get ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY sh: /usr/bin/ncftpget: not found Trying with "/usr/bin/ncftpget" to get ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY.gz sh: /usr/bin/ncftpget: not found Trying with "/usr/bin/wget -O -" to get ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY --12:30:16-- ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY => `-' Connecting to 172.22.0.66:80... connected. Proxy request sent, awaiting response... 404 Not Found 12:30:16 ERROR 404: Not Found. Trying with "/usr/bin/wget -O -" to get ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY.gz --12:30:16-- ftp://ftp.perl.org/pub/CPAN/MIRRORED.BY.gz => `-' Connecting to 172.22.0.66:80... connected. Proxy request sent, awaiting response... 404 Not Found 12:30:16 ERROR 404: Not Found. ------------- any suggestion would be highly appreciated. -- Shri Ram Pandey IKM Trainee NCSI,Indian Institute Of Science,Bangalore Official mail: shriram(a)ncsi.iisc.ernet.in "Imagine a world in which every single person on the planet is given free access to the sum of all human knowledge. ''

1 0