- Koha - lists.katipo.co.nz

Problem with HTTP::OAI
by Erik Lewis 13 Jun '09

13 Jun '09

Hi, I'm installing Koha 3.02 on Ubuntu 8.04. Everything looked good up until I tried to install HTTP::OAI, then I started getting errors. Any thoughts, suggestions, or can I just force it and forget about it? root@koha:/home/sysadmin# cpan HTTP::OAI CPAN: Storable loaded ok Going to read /root/.cpan/Metadata Database was generated on Thu, 11 Jun 2009 11:26:57 GMT Running install for module HTTP::OAI Running make for T/TI/TIMBRODY/HTTP-OAI-3.21.tar.gz CPAN: Digest::MD5 loaded ok CPAN: Compress::Zlib loaded ok Checksum for /root/.cpan/sources/authors/id/T/TI/TIMBRODY/HTTP- OAI-3.21.tar.gz ok Scanning cache /root/.cpan/build for sizes HTTP-OAI-3.21/ HTTP-OAI-3.21/CHANGES HTTP-OAI-3.21/Makefile.PL HTTP-OAI-3.21/t/ HTTP-OAI-3.21/t/listidentifiers.t HTTP-OAI-3.21/t/listmetadataformats.t HTTP-OAI-3.21/t/01parse.t HTTP-OAI-3.21/t/getrecord.t HTTP-OAI-3.21/t/error.t HTTP-OAI-3.21/t/00static.t HTTP-OAI-3.21/t/identify.t HTTP-OAI-3.21/t/50mets.t HTTP-OAI-3.21/t/02token.t HTTP-OAI-3.21/t/80network.t HTTP-OAI-3.21/MANIFEST.SKIP HTTP-OAI-3.21/README HTTP-OAI-3.21/MANIFEST HTTP-OAI-3.21/bin/ HTTP-OAI-3.21/bin/oai_browser.pl HTTP-OAI-3.21/bin/oai_static_gateway.pl HTTP-OAI-3.21/META.yml HTTP-OAI-3.21/lib/ HTTP-OAI-3.21/lib/HTTP/ HTTP-OAI-3.21/lib/HTTP/OAI.pm HTTP-OAI-3.21/lib/HTTP/OAI/ HTTP-OAI-3.21/lib/HTTP/OAI/Metadata/ HTTP-OAI-3.21/lib/HTTP/OAI/Metadata/METS.pm HTTP-OAI-3.21/lib/HTTP/OAI/Metadata/OAI_Identifier.pm HTTP-OAI-3.21/lib/HTTP/OAI/Metadata/OAI_Eprints.pm HTTP-OAI-3.21/lib/HTTP/OAI/Metadata/OAI_DC.pm HTTP-OAI-3.21/lib/HTTP/OAI/Record.pm HTTP-OAI-3.21/lib/HTTP/OAI/Response.pm HTTP-OAI-3.21/lib/HTTP/OAI/Set.pm HTTP-OAI-3.21/lib/HTTP/OAI/Error.pm HTTP-OAI-3.21/lib/HTTP/OAI/SAXHandler.pm HTTP-OAI-3.21/lib/HTTP/OAI/Header.pm HTTP-OAI-3.21/lib/HTTP/OAI/Repository.pm HTTP-OAI-3.21/lib/HTTP/OAI/Identify.pm HTTP-OAI-3.21/lib/HTTP/OAI/ListRecords.pm HTTP-OAI-3.21/lib/HTTP/OAI/Harvester.pm HTTP-OAI-3.21/lib/HTTP/OAI/ListSets.pm HTTP-OAI-3.21/lib/HTTP/OAI/MetadataFormat.pm HTTP-OAI-3.21/lib/HTTP/OAI/ResumptionToken.pm HTTP-OAI-3.21/lib/HTTP/OAI/UserAgent.pm HTTP-OAI-3.21/lib/HTTP/OAI/Headers.pm HTTP-OAI-3.21/lib/HTTP/OAI/ListMetadataFormats.pm HTTP-OAI-3.21/lib/HTTP/OAI/Encapsulation.pm HTTP-OAI-3.21/lib/HTTP/OAI/Metadata.pm HTTP-OAI-3.21/lib/HTTP/OAI/ListIdentifiers.pm HTTP-OAI-3.21/lib/HTTP/OAI/PartialList.pm HTTP-OAI-3.21/lib/HTTP/OAI/GetRecord.pm HTTP-OAI-3.21/examples/ HTTP-OAI-3.21/examples/getrecord.xml HTTP-OAI-3.21/examples/identify.xml HTTP-OAI-3.21/examples/repository.xml HTTP-OAI-3.21/examples/mets.xml Removing previously used /root/.cpan/build/HTTP-OAI-3.21 CPAN.pm: Going to build T/TI/TIMBRODY/HTTP-OAI-3.21.tar.gz Checking if your kit is complete... Looks good Writing Makefile for HTTP-OAI cp lib/HTTP/OAI/ListIdentifiers.pm blib/lib/HTTP/OAI/ListIdentifiers.pm cp lib/HTTP/OAI/PartialList.pm blib/lib/HTTP/OAI/PartialList.pm cp lib/HTTP/OAI/Set.pm blib/lib/HTTP/OAI/Set.pm cp lib/HTTP/OAI/UserAgent.pm blib/lib/HTTP/OAI/UserAgent.pm cp lib/HTTP/OAI/Record.pm blib/lib/HTTP/OAI/Record.pm cp lib/HTTP/OAI/Metadata/OAI_Identifier.pm blib/lib/HTTP/OAI/Metadata/ OAI_Identifier.pm cp lib/HTTP/OAI/SAXHandler.pm blib/lib/HTTP/OAI/SAXHandler.pm cp lib/HTTP/OAI/Error.pm blib/lib/HTTP/OAI/Error.pm cp lib/HTTP/OAI/Harvester.pm blib/lib/HTTP/OAI/Harvester.pm cp lib/HTTP/OAI/Header.pm blib/lib/HTTP/OAI/Header.pm cp lib/HTTP/OAI/Headers.pm blib/lib/HTTP/OAI/Headers.pm cp lib/HTTP/OAI/Metadata/OAI_Eprints.pm blib/lib/HTTP/OAI/Metadata/ OAI_Eprints.pm cp lib/HTTP/OAI/ListRecords.pm blib/lib/HTTP/OAI/ListRecords.pm cp lib/HTTP/OAI/GetRecord.pm blib/lib/HTTP/OAI/GetRecord.pm cp lib/HTTP/OAI.pm blib/lib/HTTP/OAI.pm cp lib/HTTP/OAI/Metadata.pm blib/lib/HTTP/OAI/Metadata.pm cp lib/HTTP/OAI/ListMetadataFormats.pm blib/lib/HTTP/OAI/ ListMetadataFormats.pm cp lib/HTTP/OAI/Response.pm blib/lib/HTTP/OAI/Response.pm cp lib/HTTP/OAI/ResumptionToken.pm blib/lib/HTTP/OAI/ResumptionToken.pm cp lib/HTTP/OAI/Metadata/OAI_DC.pm blib/lib/HTTP/OAI/Metadata/OAI_DC.pm cp lib/HTTP/OAI/Metadata/METS.pm blib/lib/HTTP/OAI/Metadata/METS.pm cp lib/HTTP/OAI/Encapsulation.pm blib/lib/HTTP/OAI/Encapsulation.pm cp lib/HTTP/OAI/Identify.pm blib/lib/HTTP/OAI/Identify.pm cp lib/HTTP/OAI/ListSets.pm blib/lib/HTTP/OAI/ListSets.pm cp lib/HTTP/OAI/Repository.pm blib/lib/HTTP/OAI/Repository.pm cp lib/HTTP/OAI/MetadataFormat.pm blib/lib/HTTP/OAI/MetadataFormat.pm cp bin/oai_browser.pl blib/script/oai_browser.pl /usr/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/ oai_browser.pl Manifying blib/man1/oai_browser.pl.1p Manifying blib/man3/HTTP::OAI::ListIdentifiers.3pm Manifying blib/man3/HTTP::OAI::Set.3pm Manifying blib/man3/HTTP::OAI::UserAgent.3pm Manifying blib/man3/HTTP::OAI::Record.3pm Manifying blib/man3/HTTP::OAI::SAXHandler.3pm Manifying blib/man3/HTTP::OAI::Error.3pm Manifying blib/man3/HTTP::OAI::Harvester.3pm Manifying blib/man3/HTTP::OAI::Header.3pm Manifying blib/man3/HTTP::OAI::Headers.3pm Manifying blib/man3/HTTP::OAI::ListRecords.3pm Manifying blib/man3/HTTP::OAI::GetRecord.3pm Manifying blib/man3/HTTP::OAI.3pm Manifying blib/man3/HTTP::OAI::Metadata.3pm Manifying blib/man3/HTTP::OAI::Response.3pm Manifying blib/man3/HTTP::OAI::ListMetadataFormats.3pm Manifying blib/man3/HTTP::OAI::ResumptionToken.3pm Manifying blib/man3/HTTP::OAI::Metadata::OAI_DC.3pm Manifying blib/man3/HTTP::OAI::Metadata::METS.3pm Manifying blib/man3/HTTP::OAI::Encapsulation.3pm Manifying blib/man3/HTTP::OAI::Identify.3pm Manifying blib/man3/HTTP::OAI::ListSets.3pm Manifying blib/man3/HTTP::OAI::Repository.3pm Manifying blib/man3/HTTP::OAI::MetadataFormat.3pm /usr/bin/make -- OK Running make test PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00static...............ok 1/20Use of uninitialized value in string eq at t/00static.t line 16. # Failed test 3 in t/00static.t at line 16 # t/00static.t line 16 is: ok($repo->Identify->version eq '2.0s'); t/00static...............NOK 3# Failed test 4 in t/00static.t at line 22 # t/00static.t line 22 is: ok($id->is_success); # Failed test 5 in t/00static.t at line 23 # t/00static.t line 23 is: ok($id->repositoryName && $id- >repositoryName eq 'Demo repository'); t/00static...............NOK 5# Failed test 6 in t/00static.t at line 27 # t/00static.t line 27 is: ok($lmdf->is_success); # Failed test 7 in t/00static.t at line 28 # t/00static.t line 28 is: ok(my $mdf = $lmdf->next); # Failed test 8 in t/00static.t at line 29 # t/00static.t line 29 is: ok($mdf && $mdf->metadataPrefix && $mdf- >metadataPrefix eq 'oai_dc'); t/00static...............NOK 8# Failed test 9 in t/00static.t at line 33 # t/00static.t line 33 is: ok($lr->is_success); # Failed test 10 in t/00static.t at line 35 # t/00static.t line 35 is: ok($rec && $rec->identifier && $rec- >identifier eq 'oai:arXiv:cs/0112017'); t/00static...............NOK 10# Failed test 11 in t/00static.t at line 39 # t/00static.t line 39 is: ok($li->is_success); # Failed test 12 in t/00static.t at line 41 # t/00static.t line 41 is: ok(@recs && $recs[-1]->identifier eq 'oai:perseus:Perseus:text:1999.02.0084'); t/00static...............NOK 12# Failed test 13 in t/00static.t at line 45 # t/00static.t line 45 is: ok($ls->is_success); # Failed test 14 in t/00static.t at line 47 # t/00static.t line 47 is: ok(@errs && $errs[-1]->code eq 'noSetHierarchy'); t/00static...............NOK 14# Failed test 15 in t/00static.t at line 51 # t/00static.t line 51 is: ok($gr->is_success); # Failed test 16 in t/00static.t at line 53 # t/00static.t line 53 is: ok($rec && $rec->identifier eq 'oai:perseus:Perseus:text:1999.02.0084'); t/00static...............NOK 16# Failed test 18 in t/00static.t at line 59 # t/00static.t line 59 is: ok(@errs && $errs[0]->code eq 'idDoesNotExist'); t/00static...............NOK 18# Failed test 20 in t/00static.t at line 64 # t/00static.t line 64 is: ok(@errs && $errs[0]->code eq 'cannotDisseminateFormat'); t/00static...............FAILED tests 3-16, 18, 20 Failed 16/20 tests, 20.00% okay t/01parse................ok 1/4 # Failed test at t/01parse.t line 18. Can't call method "metadata" on an undefined value at t/01parse.t line 19. t/01parse................NOK 2# Looks like you planned 4 tests but ran 2. # Looks like you failed 1 test of 2 run. # Looks like your test exited with 9 just after 2. t/01parse................dubious Test returned status 9 (wstat 2304, 0x900) DIED. FAILED tests 2-4 Failed 3/4 tests, 25.00% okay t/02token................ok t/50mets.................ok 1/3Can't call method "metadata" on an undefined value at t/50mets.t line 20. # Looks like you planned 3 tests but ran 1. # Looks like your test exited with 9 just after 1. t/50mets.................dubious Test returned status 9 (wstat 2304, 0x900) DIED. FAILED tests 2-3 Failed 2/3 tests, 33.33% okay t/80network..............ok 5/5 skipped: Skipping flakey net tests (set HTTP_OAI_NETTESTS env. variable to enable) t/error..................ok t/getrecord..............ok 1/8Can't call method "metadata" on an undefined value at t/getrecord.t line 72. # Looks like you planned 8 tests but ran 6. # Looks like your test exited with 2 just after 6. t/getrecord..............dubious Test returned status 2 (wstat 512, 0x200) DIED. FAILED tests 7-8 Failed 2/8 tests, 75.00% okay t/identify...............ok 1/8# Test 7 got: <UNDEF> (t/identify.t at line 32) t/identify...............NOK 7# Expected: "mailto:tdb01r@ecs.soton.ac.uk " # t/identify.t line 32 is: ok($r->adminEmail,'mailto:tdb01r@ecs.soton.ac.uk') ; t/identify...............FAILED test 7 Failed 1/8 tests, 87.50% okay t/listidentifiers........ok t/listmetadataformats....ok Failed Test Stat Wstat Total Fail Failed List of Failed ------------------------------------------------------------------------------- t/00static.t 20 16 80.00% 3-16 18 20 t/01parse.t 9 2304 4 5 125.00% 2-4 t/50mets.t 9 2304 3 4 133.33% 2-3 t/getrecord.t 2 512 8 4 50.00% 7-8 t/identify.t 8 1 12.50% 7 5 subtests skipped. Failed 5/10 test scripts, 50.00% okay. 24/60 subtests failed, 60.00% okay. make: *** [test_dynamic] Error 255 /usr/bin/make test -- NOT OK Running make install make test had returned bad status, won't install without force

4 5

Re: [Koha] MARC 001 plugin?
by Nicole Engard 13 Jun '09

13 Jun '09

I'm including the entire list in this email - where did you find that documentation? And does anyone else have any information about this? --- Nicole C. Engard Open Source Evangelist, LibLime (888) Koha ILS (564-2457) ext. 714 nce(a)liblime.com AIM/Y!/Skype: nengard http://liblime.com http://blogs.liblime.com/open-sesame/ On Fri, Jun 12, 2009 at 10:21 AM, Ondrej Mlecka<omlecka(a)gmail.com> wrote: > Thank you. I found on the internet the information about plugins for fields > 001, 003, 005, 008 ecc., but, as I see, the 001seems to be a mistake. I > wanted to use this field for correctness of the MARC code, but I think I > will use the 999 identifier only. > > Thank you > > Ondrej Mlecka > > On Fri, Jun 12, 2009 at 12:02, Nicole Engard <nicole.engard(a)liblime.com> > wrote: >> >> In Koha Cataloging a "plugin" can be found by clicking on the "..." >> after the cataloging field. Basically plugins make it so that you can >> edit the field with a series of pull down menus. That said, there >> isn't a plugin for the 001 that I know of. >> >> --- >> >> Nicole C. Engard >> Open Source Evangelist, LibLime >> (888) Koha ILS (564-2457) ext. 714 >> nce(a)liblime.com >> AIM/Y!/Skype: nengard >> >> http://liblime.com >> http://blogs.liblime.com/open-sesame/ >> >> >> >> 2009/6/12 Ondrej Mlecka <omlecka(a)gmail.com>: >> > Hi all, >> > >> > I've read that there exists a plugin for MARC 001 field but I can't find >> > it >> > anywhere. Would anyone know where I can find this plugin? >> > >> > Thank you >> > >> > Ondrej Mlecka >> > >> > _______________________________________________ >> > Koha mailing list >> > Koha(a)lists.katipo.co.nz >> > http://lists.katipo.co.nz/mailman/listinfo/koha >> > >> > > >

1 0

Re: [Koha] Circulation and fine Rules problem
by Nicole Engard 13 Jun '09

13 Jun '09

Okay - I don't see that at all on my install - anyone have any information on this?? --- Nicole C. Engard Open Source Evangelist, LibLime (888) Koha ILS (564-2457) ext. 714 nce(a)liblime.com AIM/Y!/Skype: nengard http://liblime.com http://blogs.liblime.com/open-sesame/ On Fri, Jun 12, 2009 at 12:25 PM, Vimal Kumar<vimal0212(a)gmail.com> wrote: > Here is the screen shot of "Circulation and Fine rules" of Koha 3.02. > > What value we put in Fine Days field? > > > > On Thu, Jun 11, 2009 at 10:54 PM, Nicole Engard <nicole.engard(a)liblime.com> > wrote: >> >> Can you send a screenshot? I don't see a field like that ... which >> would be why I didn't document it :) >> >> --- >> >> Nicole C. Engard >> Open Source Evangelist, LibLime >> (888) Koha ILS (564-2457) ext. 714 >> nce(a)liblime.com >> AIM/Y!/Skype: nengard >> >> http://liblime.com >> http://blogs.liblime.com/open-sesame/ >> >> >> >> 2009/6/11 Vimal Kumar <vimal0212(a)gmail.com>: >> > Dear Koha users, >> > >> > I just upgraded from 3.01 to 3.02. >> > >> > After upgrading I found a new field “Fine Days” in Circulation and fine >> > Rules section. >> > >> > Whats the purpose of this field? >> > >> > Another problem is that, not able to save a new fine rule. >> > >> > It does not save the new fine rule when clicking on Add button after >> > entering values in all fields. >> > >> > I request your urgent attention to this problem. >> > >> > Thanking you, >> > >> > >> > -- >> > Vimal Kumar V. >> > Asst. Librarian >> > Asian School of Business >> > Technopark, Trivandrum-695 581 >> > Web: www.vimalkumar.co.nr >> > Blog: http://vimalkumar.oksociety.in >> > >> > OK Society Volunteer. http://oksociety.in >> > >> > --------------------------------------------------------------------------- >> > "I forget what I was taught. I only remember what I have learnt" >> > -Patrick White >> > >> > _______________________________________________ >> > Koha mailing list >> > Koha(a)lists.katipo.co.nz >> > http://lists.katipo.co.nz/mailman/listinfo/koha >> > >> > > > > > -- > Vimal Kumar V. > Asst. Librarian > Asian School of Business > Technopark, Trivandrum-695 581 > Web: www.vimalkumar.co.nr > Blog: http://vimalkumar.oksociety.in > > OK Society Volunteer. http://oksociety.in > --------------------------------------------------------------------------- > "I forget what I was taught. I only remember what I have learnt" > -Patrick White >

1 0

Implications of "single-branch mode"?
by Agnes Rivers-Moore 13 Jun '09

13 Jun '09

2 1

Holds to pull question
by Rich Boulet 12 Jun '09

12 Jun '09

Hello Everyone: I remain confused about how the 'Holds to Pull' report, linked at the circulation menu of our Koha (3.01.00.014) installation. Our main objective is to be notified about new hold requests in a manner that is free of clutter. So here is what happens: About 3 or 4 times a day we check that report to see what new requests have been sent in by our patrons. Normally we retrieve new items from the shelf (after changing the date range of the report to include the latest requests), and scan them into the check in function at the circ desk. This triggers the hold message and we then print and confirm the hold. Wouldn't you think that this would remove the items from that report, if not instantly, then at least within a few hours? Is that how this report is supposed to work? If so, what need to happen to remove satisfied holds from this report. Oh, and the kicker is that for some reason, only certain items stay on the holds to pull report. For example we currently have holds to pull report that looks like this (assuming and hoping this list accepts images): Yet we have already confirmed the holds for each of the items, and their statuses appear to be correct in the catalog. Why are these items remaining on the report? Any suggestion appreciated. Thanks, Rich Boulet Richard Boulet Library Director Blue Hill <http://www.bhpl.net/> Public Library 207.374.5515x13

1 0

Where are tags stored?
by Cab Vinton 12 Jun '09

12 Jun '09

If patron-authored tags are enabled, where are these stored? I don't believe they're anywhere in the MARC record. Thank you, Cab Vinton, Director Sanbornton Public Library Sanbornton, NH

2 1

Setting Up Zebra on Ubuntu 8.04
by Roche III, Edward 12 Jun '09

12 Jun '09

I am having an issue with setting up Zebra. I got it to work on a prior install but can't seem to get it to work this time. Here is what I am doing: * I selected Zebra during Koha Makefile * I was able to install all the modules except for the NET::LDAP * I selected Zebra during Koha configuration in the browser * $ sudo ln -s ${SCRIPT_DIR}/koha-zebra-ctl.sh /etc/init.d/koha-zebra-daemon * $ sudo update-rc.d koha-zebra-daemon defaults * $ sudo ${SCRIPT_DIR}/koha-zebra-ctl.sh start I keep getting update-rc.d: /etc/init.d/koha-zebra-daemon: file does not exist. I have conformed the file is there. Any thoughts? Thanks Ed Edward J. Roche Network Administrator Solanco School District 717.786.2151 x2437 "At the End of the Day, Did You Play to Win or Not to Lose?"

2 1

Re: [Koha] Problem with HTTP::OAI
by Olugbenga Adara 12 Jun '09

12 Jun '09

Hello, I also got the same error on opensuse 11. Anybody got zebra working on opensuse? Olugbenga Adara Mobile: 234-803-3220288 --- On Fri, 6/12/09, Erik Lewis <elewis(a)ngrl.org> wrote: > From: Erik Lewis <elewis(a)ngrl.org> > Subject: Re: [Koha] Problem with HTTP::OAI > To: "Ricardo Dias Marques" <lists(a)ricmarques.net> > Cc: koha(a)lists.katipo.co.nz > Date: Friday, June 12, 2009, 7:22 AM > For what it is worth I got the same > issue when I tried to install > HTTP::OAI 3.20. > > > > On Jun 12, 2009, at 10:12 AM, Ricardo Dias Marques wrote: > > > Following up to myself, > > > > On Fri, Jun 12, 2009 at 14:38, Ricardo Dias > Marques<lists(a)ricmarques.net > > > > wrote: > > > >> [snip] > >> > >> I'm also trying to report this error using the > "CPAN::Reporter" > >> module, in the hope that it gets listed in the > "CPAN Testers reports" > >> page for that HTTP-OAI module: > >> > >> CPAN Testers Reports: Reports for HTTP-OAI > >> http://www.cpantesters.org/distro/H/HTTP-OAI.html > >> > >> ... but I'm having some problems to get it listed > there [snip] > > > > Well, it seems that my FAIL report for the HTTP::OAI > installation is > > now online on the "CPAN Testers Reports" web page for > that module: > > > > CPAN Testers Reports: Reports for HTTP-OAI > > http://www.cpantesters.org/distro/H/HTTP-OAI.html > > > > > > Specifically, my FAIL report is the Report with the ID > 4146407 : > > > > FAIL HTTP-OAI-3.21 i586-linux-thread-multi 2.6.25 > - nntp.perl.org > > http://www.nntp.perl.org/group/perl.cpan.testers/2009/06/msg4146407.html > > > > > > Let's hope that this gets more attention to the > issue... > > > > Cheers, > > Ricardo > > _______________________________________________ > Koha mailing list > Koha(a)lists.katipo.co.nz > http://lists.katipo.co.nz/mailman/listinfo/koha >

1 0

Reference books & books for loan
by Ondrej Mlecka 12 Jun '09

12 Jun '09

In our library, there's a big part of books which a patron can read inside of the library but which are not available for loan. There's another part of the library which contains books for loan. I would like to ask how is it possible to distinguish these categories in Koha. If I simply check the "Not for loan" field for items which are for referene only, the OPAC search summary displays "No copies available" (but they are available, but not for loan). I could also define that for ex. that books are not for loan (in the "Item types and circulation" settings). But in this case I can't distinguish books which are for loan. Would anyone know how to resolve this difficulty? Thanks Ondrej Mleca Casa Balthasar Roma

2 1

Importing and updating bibliographic records
by Sébastien Hinderer 12 Jun '09

12 Jun '09

Dear list, My library wishes to use koha and so we have to inject our existng catalog into koha. Our current catalog is stored in a mysql database and we already have the necessary tools written in Perl to play with the records in the database. The strategy I have in mind for doing the migration is to convert all our bbliographic records to UNIMARC using the MARC::Record tool and then import it into koha. I have several questions. 0. Does this strategy look correct to you ? 1. According to perldoc MARC::Record, it seems that the module can handle only USMARC and MicroLIF styles. Is one of these two okay for handling UniMarc and, if yes, which one ? 2. After the initial import has been done, we will certainly want to refine it by using data from our national library, sch as leaders for instance (?), or perhaps or initial import won't be complete and we will want to add other things we did not at first to keep the first import possible. So, is the incremental modification of records possible and how ? Wil we have to export the records to marc, then modify them and re-inject them, or is it recommended to do things another way ? Please consider that I know nothing concerning the tomic I'm trying to address in this post and don't hesitate to give pointers to things you thnk I should read. Many thanks in advance for any help, Sébastien.

2 4