- Koha - lists.katipo.co.nz

DBD::mysql problem
by Steven Owley 10 Jun '08

10 Jun '08

Hi everyone, Is this caused by a utf-8 problem? The install of DBD::mysql via cpan will not pass two of its tests, takeimp and impdata: t/70takeimp.................Can't use dbi_imp_data of wrong size (127 not 124) at /usr/lib/perl5/DBI.pm line 1190. SV = RV(0x81a462c) at 0x8268020 REFCNT = 1 FLAGS = (ROK) RV = 0x8267ff0 (in cleanup) dbih_getcom handle DBI::db=HASH(0x8267ff0) is not a DBI handle (has no magic). SV = RV(0x81a462c) at 0x8268074 REFCNT = 1 FLAGS = (ROK,READONLY) RV = 0x8267ff0 # Looks like you planned 21 tests but only ran 12. # Looks like your test died just after 12. t/70takeimp.................dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 13-21 Failed 9/21 tests, 57.14% okay t/71impdata.................ok 1/10Can't use dbi_imp_data of wrong size (127 not 124) at /usr/lib/perl5/DBI.pm line 1190. SV = RV(0x81a63c8) at 0x8384b30 REFCNT = 1 FLAGS = (ROK) RV = 0x8384b00 (in cleanup) dbih_getcom handle DBI::db=HASH(0x8384b00) is not a DBI handle (has no magic). SV = RV(0x81a63c8) at 0x8384b84 REFCNT = 1 FLAGS = (ROK,READONLY) RV = 0x8384b00 # Looks like you planned 10 tests but only ran 6. # Looks like your test died just after 6. t/71impdata.................dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 7-10 Failed 4/10 tests, 60.00% okay Any help you can be would be appreciated. Thanks! Steve

2 2

spine label
by Suzanne Gilbert 10 Jun '08

10 Jun '08

Hello, I am just beginning to put books on the computer for our school library. We had been using version 1.2.4 (I think). We are now using 3.0. In the old version there was a place for Item Type, which is Fiction, non-fiction, young adult, etc, which I have been able to figure out and edit in version 3.0. In the old version there was a category - Classification, which was what was on the spine label...so the students, if they looked the book up on the electronic card catalog, would know where to locate the book on the shelf. Is Classification in the old version the same thing as Shelving Location in 3.0 and if so, how do I get in to it to edit it (right now it has Biography, Fiction, New Book Shelf (twice), and Reference, when I click on it). Or is Koha Full Call Number where I should fill in what is on the spine label? I hope my question is clear and someone will be able to answer it. I'm kind of stuck until then. Thanks. Suzanne Gilbert IHM Library

1 0

cannot add bibliographic data into the system
by ils rehoboth 10 Jun '08

10 Jun '08

Dear All I'm new in Koha, and I have already Installed Koha 2.2.9 on Ubuntu 6.06 Linux. Everything seem Ok. i have added members and can even search for members in database.i can even search LC databases using z3950 and importing them but when i try adding bibliographic data to the databases it show error like this : Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, rehoboth_ils(a)yahoo.com and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log. The server error log has the following errors: 1. premature end of script headers: addbiblio.pl, referer:: old biblionumber=0&Z3950=1&breeding id=86 2.file doesn't exist: usr/local/koha/intranet/htdocs/intranet-tmpl/dafault/en/includes/intranet.css, referer: http:192.168.1.173:8080/cgi-bin/koha/Z3950/sarch.pl 3. Q2:select distinct m1.bibid from biblioitems, marc_biblio,marc_word as m1,marc_word as m2,marc_word as m3,marc_word as m4,marc_word as m5,marc_word as m6,marc_word as m7,,marc_word as m8, marc subfield_table as m9 where biblio.biblionumber=marc_biblionumber and biblio.biblio.number=biblioitems.b... please tell me what is wrong with my installation and how can i solve it Thanks in advance

1 0

Circ Checkout without Item Barcode?
by carpentercarselibrary＠gmavt.net 10 Jun '08

10 Jun '08

Most of the members of our consortium will be migrating to K3 from Follett Circulation+. When checking out or checking in an item, Follett gives you the ability to search quickly by title or other means, if the barcode for some reason is not available. It appears in K3 that the only way easily to check out/in an item is via the barcode. Is this truly the case, or am I missing something? Is there a module or add-on that might provide the capability? Thanks in advance for your help! Richard Pritsky, Asst. Director Carpenter-Carse Library PO BOX 127 Hinesburg, VT 05461 802-482-2878 www.carpentercarse.org

2 1

cannot add bibliographic due to server problems
by ils rehoboth 10 Jun '08

10 Jun '08

Hi everybody, I installed koha-2.2.9 on ubuntu 6.06. it appears to be working- i have added new members which and i can even search for members. Have also tested z3950 and it imports records from LC. The problem is when i add bibiographic records it gives me the error message below: The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, rehoboth_ils(a)yahoo.com and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error There are three errors i found in server error log: 1.premature end of script headers:addbiblio.pl, referer:http://192.168.1.173:8080/cgi-bin/koha/acqi.simple/addbiblio.pl?oldbiblionumber=0&z3950=1 & breeding id=86 file doesnot exist:usr/local/koha/intranet/htdocs/intranet-tmpl/default/en/includes/intranet.css, referer: http://192.168.1.173:8080 Q2:select distinct m1.bibid from biblio, biblioitems, marc_bibilio, marcword as m1, marcword as m2, marcword as m3, marcword as m4, marcword as m5, marcword as m6, marcword as m7, marcword as m8, marc subfield_table as m9 where biblio.biblionumber=marc_biblionumber and biblio.biblio.number=biblioitems.b... Please help me to know what is the likely problems of the above errors and possible solutions yours Rehoboth

1 0

Zebra indexing rebuilding problems for hindi language
by dpl＠dpl.gov.in 10 Jun '08

10 Jun '08

hi all we are testing the koha 3 bata 2 version on CENTOS 5. zebra server is working properly and rebuilding the indexing for English books but when we inputed Hindi language books it stop indexing and rebuilding when we run the script /zebraqueue_daemon.pl it give the following error we use window xp client and mangal font opentype font. [root@localhost bin]# ./zebraqueue_daemon.pl problem with :426 : Premature end of data in tag subfield line 60 Premature end of data in tag datafield line 56 Premature end of data in tag record line 2 at /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi/XML/LibXML/SAX.pm line 64 at /usr/lib/perl5/site_perl/5.8.8/MARC/File/XML.pm line 448 <?xml version="1.0" encoding="UTF-8"?> <record xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.loc.gov/MARC21/slim http://www.loc.gov/ standards/marcxml/schema/MARC21slim.xsd" xmlns="http://www.loc.gov/MARC21/slim"> <leader>00931nam a22002417a 4500</leader> <controlfield tag="005">20080609172054.0</controlfield> <controlfield tag="006">a|||||r|||||00| 0 </controlfield> <controlfield tag="007"></controlfield> <controlfield tag="008">080609t xxu||||| |||| 00| 0 hin d</controlfield> <datafield tag="010" ind1=" " ind2=" "> <subfield code="a">HIN-83383</subfield> </datafield> <datafield tag="020" ind1=" " ind2=" "> <subfield code="a">9788188031214</subfield> <subfield code="c">250.00</subfield> </datafield> <datafield tag="035" ind1=" " ind2=" "> <subfield code="a">HN-55729</subfield> </datafield> <datafield tag="040" ind1=" " ind2=" "> <subfield code="a">DPL</subfield> <subfield code="b">HN</subfield> </datafield> <datafield tag="082" ind1=" " ind2=" "> <subfield code="a">827 / थानवी</subfield> </datafield> <datafield tag="100" ind1=" " ind2=" "> <subfield code="a">थानवी, शौकत</subfield> </datafield> <datafield tag="245" ind1=" " ind2=" "> <subfield code="a">ईद का चाद /</subfield> <subfield code="c">शौकत थानवी; एम.असलम दवारा अनदित</subfield> </datafield> <datafield tag="260" ind1=" " ind2=" "> <subfield code="a">दिलली</subfield> <subfield code="b">मनीष परकाशन</subfield> <subfield code="c">2008</subfield> </datafield> <datafield tag="270" ind1=" " ind2=" "> <subfield code="a">सी-8/174, यमना विहार</subfield> <subfield code="b">दिलली</subfield> <subfield code="e">110053</subfield> </datafield> <datafield tag="300" ind1=" " ind2=" "> <subfield code="a">208प</subfield> <subfield code="c">22समी(सजिलद)</subfield> </datafield> <datafield tag="500" ind1=" " ind2=" "> <subfield code="a">हासय वयगय की शरषठ कति</subfield> </datafield> <datafield tag="700" ind1=" " ind2=" "> <subfield code="a">असलम, एम.</subfield> </datafield> <datafield tag="942" ind1=" " ind2=" "> <subfield code="2">ddc</subfield> <subfield code="c">BKS</subfield> <subfield code="h">827 / थानवी</subfield> <subfield code="6">827_ at /usr/share/koha/lib/C4/Biblio.pm line 836. Wide character in null operation at /usr/lib/perl5/site_perl/5.8.8/MARC/Charset/Table.pm line 96. pl help how over come this problems thanking you dpl

2 2

Indexing with Java
by solomon kariri 10 Jun '08

10 Jun '08

Hi I want to use Marc4j(Java API for dealing with MARC records) to index koha using lucene(A Java indexing tool) so that I can implement a cross search between two applications while giving the result to the user in a manner transparent as to where the records came from such that the user can click on a link and will be redirected to koha to get more info about the item e.g. a book and maybe reserve it. Does anyone know how this can be done. Please help me. Thanks.

3 2

server-error
by ils rehoboth 10 Jun '08

10 Jun '08

Hi everybody, I installed koha-2.2.9 on ubuntu 6.06. it appears to be working- i have added new members which and i can even search for members. Have also tested z3950 and it imports records from LC. The problem is when i add bibiographic records it gives me the error message below: The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, rehoboth_ils(a)yahoo.com and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error There are three errors i found in server error log: 1.premature end of script headers:addbiblio.pl, referer:http://192.168.1.173:8080/cgi-bin/koha/acqi.simple/addbiblio.pl?oldbiblionumber=0&z3950=1 & breeding id=86 filedoesnotexist:usr/local/koha/intranet/htdocs/intranet-tmpl/default/en/includes/intranet.css, referer: http://192.168.1.173:8080 Q2:select distinct m1.bibid from biblio, biblioitems, marc_bibilio, marcword as m1, marcword as m2, marcword as m3, marcword as m4, marcword as m5, marcword as m6, marcword as m7, marcword as m8, marc subfield_table as m9 where biblio.biblionumber=marc_biblionumber and biblio.biblio.number=biblioitems.b... Please help me to know what is the likely problems of the above errors and possible solutions yours Rehoboth

1 0

koha add member problem
by dlis.rbu＠rediffmail.com 10 Jun '08

10 Jun '08

I am using following versions to install Koha in windows XP Koha229 Apache2.2 MySql Server 5.0 Activeperl-5.8.8.822-MSIWin32-x86-280952. It is working fine to create catalogue and able to search OPAC but FACING PROBLEM TO ADD MEMBER DATA. Member data is not saving in the database and resulting template showing blank (SHOWING NO ERROR MESSAGE). Please provide me the solution.

1 0

Re: [Koha] RFID and Koha 2.2.2
by gsl 09 Jun '08

09 Jun '08

Sorry, I don't have much other firm info to offer. I do know that 3M has an RFID system, but it may be Windows based too, and while I would expect it to be very good it's probably a bit pricey. Checkpoint has an RFID system, but as I recall it's also Windows based. Treat these comments with a little caution, I haven't looked an them too closely recently; most of what I know except for Envisionware is just from me visiting booths at shows and being given informational literature. Also, I don't want to minimize Envisionware incorrectly; they really do have a very slick, well coordinated system. Part of the way they get it all to work together is that they specify a lot of the components of the system, which they have integrated to work right, but that does mean buying "stuff" from them and MS. Except for the MS lock-in I certainly have nothing bad to say about Envisionware, even their sales/support people seem pretty good. Here are a few links: http://www.ala.org/ala/lita/litamembership/litaigs/rfidtechnology/index.cfm http://solutions.3m.com/wps/portal/3M/en_US/library/home/products/rfid_syst… http://www.checkpointsystems.com/ http://www.bibliothecarfid.com/ As Koha is just now getting off the ground it seems like a really opportune time for vendors of RFID and public access time/management systems to start working with it and establish good working relationships with the Koha support companies like LibLime and others. Greg -------------------------- Joann Ransom wrote: > Hi Greg, > > Thanks for that. We too run all Linux servers and Envisionware would > have to be splendidly better than its competitors before I took it to > our sys admin to seriously consider using it. Are thereother options > that you know of? > > cheers Joann Ransom. > /Horowhenua Library Trust./ > /New Zealand/ > > On Sat, Jun 7, 2008 at 3:02 AM, gsl <gsl(a)rollinghills.lib.mo.us > <mailto:gsl@rollinghills.lib.mo.us>> wrote: > > Joann: > > Sorry I don't have any specific information I can offer, but as a > general comment I've liked what I've seen of demos of the Bibliotheca > RFID system. I've also looked at, and played with, Envisionware > quite a > bit. Envisionware certainly has the appearance of having put all their > components together nicely, but they are completely Microsoft > OS-centric > (for the systems I've looked at). We are very much Linux here, so > we've > never purchased any of their products. With Envisionware it was > always a > matter of buying Yet Another Server, and I don't want to add any more > servers, especially MS ones, even VM, to our network room. > > Greg > Rolling Hills Consolidated Library > ----------------------------------------------- > > Joann Ransom wrote: > > Hi there, > > > > We are running Koha 2.2.2. <http://2.2.2./> <http://2.2.2 > <http://2.2.0.2/>.> We wish to move to a RFID > > ystem for self issuing, auto-returning and minor sorting, and stock > > counting reasons. > > > > I have read through literature from EnvisionWare, TechLogicand > > Bibliotheca. > > > > I am very impressed with the solutions offered by Envisionware, > > including the smart cardtype issues around topping up a card via > > crecit card or cash and using ir for internet access, photocopying, > > prinitng, issue charges etc. EnvisionWare apparently have clients > > running Evergreen, but they weren't sure about Koha. > > > > So my question is, do any libraries out there running 2.0.x have any > > comments, observations or advice they would be willing to share > about > > RFID vendors and systems in relation to Koha. > > > > regards, > > > > Joann Ransom. > > Horowhenua Library Trust. > > New Zealand. > > _______________________________________________ > Koha mailing list > Koha(a)lists.katipo.co.nz <mailto:Koha@lists.katipo.co.nz> > http://lists.katipo.co.nz/mailman/listinfo/koha > >

1 0