- Koha - lists.katipo.co.nz

590 local note public and non public notes not displaying properly
by Elaine Bradtke 25 Jun '21

25 Jun '21

We use a 590 local note for some material. There is a subfield x Non Public Note which contains information for the staff regarding the content of the work, and a subfield z Public note that contains a generic statement governed by an authorized value. What we see in the normal view in both the staff interface and the OPAC is the Non Public note and the code for the authorized value for the public note. In the OPAC, it displays correctly in labeled MARC. In plain MARC it only displays the authorized value code. See https://catalogue.efdss.org/cgi-bin/koha/opac-detail.pl?biblionumber=65305 for an example. Non public notes seem to work as expected in the item records. This worked before we upgraded to 21.05 Should I file a bug? Elaine Bradtke VWML <https://www.vwml.org> English Folk Dance and Song Society <https://www.efdss.org> Cecil Sharp House, 2 Regent's Park Road, London NW1 7AY Tel +44 (0) 20 7485 2206 (This number is for the English Folk Dance and Song Society in London, England. If you wish to phone me personally, send an e-mail first. I work off site) -------------------------------------------------------------------------- Registered Company No. 297142 Charity Registered in England and Wales No. 305999

2 1

Keyword search in Koha
by Michael Kuhn 25 Jun '21

25 Jun '21

Hi Lately I stumbled upon some strange behaviour of the keyword search in Koha. In our library we are using an unchanged Zebra configuration as coming with Koha 20.11.00. The Koha manual describes the keyword search in the following chapter: https://koha-community.org/manual/20.11/en/html/searching.html#basic-search… 1. The manual says: "When a single word is entered, a keyword search is performed. You can check this out by typing one word into the form and note the number of results located. Then, repeat the search with a minor change. In front of the search word, type ‘kw=’ followed by the same search term. The results will be identical." I did check this out and the result was NOT identical. Why is that so? The following searches produce a difference of four results: Search for: biology * URL: .../search.pl?q=biology * 5939 results Search for: kw=biology * URL: .../search.pl?q=kw%3Dbiology * 5935 results The following searches produce a difference of 49 results: Search for: life * URL: .../search.pl?q=life * 837 results Search for: kw=life * URL: .../search.pl?q=kw%3Dbiology * 788 results 2. The manual also says: "When you have more than one word in the search box, Koha will still do a keyword search, but a bit differently. Each word will be searched on its own, then the Boolean connector ‘and’ will narrow your search to those items with all words contained in matching records." I did check this out and it does not seem to be true - if I just enter two words (biology life) I get 37 more results than when I'm using the boolean operator AND. What is the explanation for this? Search for: biology life * URL: .../search.pl?q=biology+life * 521 results Search for: biology AND life * URL: .../search.pl?q=biology+AND+life * 484 results Search for: kw=biology AND kw=life * URL: .../search.pl?q=kw%3Dbiology+AND+kw%3Dlife * 484 results Especially I'm stunned because the first search does not seem to be using the OR operator but still produces considerably more results than the searches using the AND operator. 3. Is there maybe some undocumented use of using wildcards going on if one is not using a search prefix? Best wishes: Michael -- Geschäftsführer · Diplombibliothekar BBS, Informatiker eidg. Fachausweis Admin Kuhn GmbH · Pappelstrasse 20 · 4123 Allschwil · Schweiz T 0041 (0)61 261 55 61 · E mik(a)adminkuhn.ch · W www.adminkuhn.ch

1 0

Koha 20.05.13 released, ⚠ security release
by Victor Grousset/tuxayo 25 Jun '21

25 Jun '21

Hello! :) The Koha Community is happy to announce the release of Koha 20.05.13 The full release notes can be found at: https://koha-community.org/koha-20.05.13-released/ Debian packages should be available shortly. Thanks to everyone involved :) Cheers, -- Victor Grousset/tuxayo

1 0

Release of Koha 21.05.01
by Nick Clemens 24 Jun '21

24 Jun '21

Hi all! The Koha community is pleased to announce the release of Koha 21.05.01! The full release notes can be found here: https://koha-community.org/koha-21-05-01-released/ Thanks! Kyle + Nick -- Nick Clemens ByWater Solutions bywatersolutions.com Phone: (888) 900-8944 Pronouns: (he/him/his) Timezone: Eastern Follow us: <https://www.facebook.com/ByWaterSolutions/> <https://www.instagram.com/bywatersolutions/> <https://www.youtube.com/user/bywatersolutions> <https://twitter.com/ByWaterSolution>

1 0

CHAT: RE: [EXTERNAL] Re: There was an error updating the user
by King, Fred 24 Jun '21

24 Jun '21

Sorry--couldn't resist: An error updating the user In Koha is quite the confuser. But this version has bugs In its scripts and its plugs.* As Bugzilla will show the peruser. *Plug-ins Fred King, MSLS, AHIP Medical Librarian, MedStar Washington Hospital Center fred.king(a)medstar.net 202-877-6670 ORCID 0000-0001-5266-0279 MedStar Authors Catalog: http://medstarauthors.org I wanted to be the person my dog thinks I am. Instead I’m the person my cat thinks I am. --Anon -----Original Message----- From: Koha <koha-bounces(a)lists.katipo.co.nz> On Behalf Of Jonathan Druart Sent: Wednesday, June 23, 2021 10:59 AM To: Victor Barroso Oliveira <vbovictor(a)gmail.com> Cc: Koha <koha(a)lists.katipo.co.nz> Subject: [EXTERNAL] Re: [Koha] There was an error updating the user **ATTENTION: This email originated from outside the MedStar Health network. ** DO NOT CLICK links or attachments unless you recognize the sender and know the content is safe. You certainly hit bug 27144 (Cannot delete any patrons) 21.05.00 is buggy, 21.05.01 will be released very soon! Also it is always good to check the logs and report here what you found there :) Le mer. 23 juin 2021 à 16:31, Victor Barroso Oliveira <vbovictor(a)gmail.com> a écrit : > > In version 18 ubuntu and koha 21.5. > When trying to save a user is showing the following error "There was > an error updating the user. Check the logs." > How can I solve this problem? > Thanks, > Victor > _______________________________________________ > > Koha mailing list > https://urldefense.com/v3/__http://koha-community.org__;!!D7IIWT94AA!p > rDDIt8_eHjcs3uIpAfOHu1lAH1wmlp-esvlxxiRrkDZRmQxHZbW54vMiu9ZoyBhtw$ > Koha(a)lists.katipo.co.nz > Unsubscribe: > https://urldefense.com/v3/__https://lists.katipo.co.nz/mailman/listinf > o/koha__;!!D7IIWT94AA!prDDIt8_eHjcs3uIpAfOHu1lAH1wmlp-esvlxxiRrkDZRmQx > HZbW54vMiu-GTnpGmA$ _______________________________________________ Koha mailing list https://urldefense.com/v3/__http://koha-community.org__;!!D7IIWT94AA!prDDIt… Koha(a)lists.katipo.co.nz Unsubscribe: https://urldefense.com/v3/__https://lists.katipo.co.nz/mailman/listinfo/koh… ---------------------------------------------------------------------- MedStar Health is a not-for-profit, integrated healthcare delivery system, the largest in Maryland and the Washington, D.C., region. Nationally recognized for clinical quality in heart, orthopedics, cancer and GI. IMPORTANT: This e-mail (including any attachments) may contain information that is private, confidential, or protected by attorney-client or other privilege. If you received this e-mail in error, please delete it from your system without copying it and notify sender by reply e-mail, so that our records can be corrected... Thank you. Help conserve valuable resources - only print this email if necessary.

1 0

bogged down in a koha install
by o1bigtenor 24 Jun '21

24 Jun '21

Greetings Following the 'destructions' at: https://wiki.koha-community.org/wiki/Debian#Before_you_begin have worked my way through until trying to set up plask $ sudo a2enmod headers proxy_http then: $ sudo koha-plack --enable libraryname # a2enmod proxy_http Considering dependency proxy for proxy_http: Enabling module proxy. Enabling module proxy_http. To activate the new configuration, you need to run: service apache2 restart root@memyself:/# service apache2 restart [ ok ] Restarting Apache httpd web server: apache2. root@memyself:/# koha-plack --enable library [FAIL] Error: Invalid instance name library: failed! # dpkg -l | grep plack ii libplack-middleware-logwarn-perl 0.001002-1 all converts warnings to log messages ii libplack-middleware-reverseproxy-perl 0.16-1 all module supporting apps to run as a reverse proxy backend ii libplack-perl 1.0047-1 all interface between web servers and Perl web applications so - - - I think I do have plack - - - - not sure how to get whatever needs to see libplack-perl looking in the right direction. (perl is already the newest version (5.28.1-6+deb10u1). - - - - if it matters.) TIA (just subscribed to the user list and haven't seen any questions on install so chose to cc the dev list - - - hopefully not deprecated behavior - - - - :-) !)

2 1

[koha]Batch modify items stuck at 0%
by muiru james 23 Jun '21

23 Jun '21

Hello, Our server running koha 20.05 on ubuntu focal fossa cannot batch modify items. After scanning the barcodes n clicking the continue button, it returns the items details but after setting the date last seen and saving the changes, the progress bar remains stuck at 0%. I have tried to use the inventory module and upload the same list of barcodes and this time it returns the error below: ...... Mysql server has gone away at /usr/share/koha/lib/koha/object.pm line 166 There was a blackout and the server shutdown. On power resumption, it could not boot and got stuck at initramfs. I googled a solution (fsck /dev/sda1 -y). It fixed some errors and returned that some files have been modified and fixed the boot issue. Since then, the batch items modification and the inventory issues arose. We are in the middle of our annual stock taking. Any help towards resolving this issue will be greatly appreciated. Warm Regards James

2 1

Reoccurring DBMS auto increment issue
by Michael Kuhn 23 Jun '21

23 Jun '21

Hi We are working with Debian GNU/Linux 10, MariaDB 10.3.27 and Koha 20.11.00 (using Shibboleth authentication). To avoid auto increment issues we have implemented the solution described in https://wiki.koha-community.org/wiki/DBMS_auto_increment_fix#Single_instanc… - of course replacing "koha_kohadev" with the name of our own database, then restarted MariaDB. We did this even if the page says only versions prior to MariaDB 10.2.24 are affected. However, if we implement the fix or not, the following problem occurs: When we manually create a new Koha user (e. g. 84) and then try to delete it in the staff client, the message appears "An Error Occurred / 500 Internal Server Error". In Koha menu "About Koha > System information" it says "The following ids exist in both tables borrowers and deletedborrowers: 84". So we delete that number in MariaDB using SQL statement "DELETE FROM deletedborrowers where borrowernumber=84;". After that table "deletedborrowers" is empty and Koha menu "About Koha > System information" says "No warnings.". Again we try to delete the user, the internal server error occurs, etc ad infinitum. Are we doing something wrong? Best wishes: Michael -- Geschäftsführer · Diplombibliothekar BBS, Informatiker eidg. Fachausweis Admin Kuhn GmbH · Pappelstrasse 20 · 4123 Allschwil · Schweiz T 0041 (0)61 261 55 61 · E mik(a)adminkuhn.ch · W www.adminkuhn.ch

5 10

Re: [Koha] There was an error updating the user
by Jonathan Druart 23 Jun '21

23 Jun '21

(please stay on the list) It was more bug 28490 actually, which will be part of 21.05.01 as well. There is no workaround for this one, apart from applying the patches (which I would not recommend to you). Le mer. 23 juin 2021 à 17:05, Victor Barroso Oliveira <vbovictor(a)gmail.com> a écrit : > > Log information follows > {"dateofbirth": {"after": "", "before": null}} > There is no workaround for this error? > > Em qua., 23 de jun. de 2021 às 11:59, Jonathan Druart <jonathan.druart(a)bugs.koha-community.org> escreveu: >> >> You certainly hit bug 27144 (Cannot delete any patrons) >> 21.05.00 is buggy, 21.05.01 will be released very soon! >> >> Also it is always good to check the logs and report here what you found there :) >> >> Le mer. 23 juin 2021 à 16:31, Victor Barroso Oliveira >> <vbovictor(a)gmail.com> a écrit : >> > >> > In version 18 ubuntu and koha 21.5. >> > When trying to save a user is showing the following error >> > "There was an error updating the user. Check the logs." >> > How can I solve this problem? >> > Thanks, >> > Victor >> > _______________________________________________ >> > >> > Koha mailing list http://koha-community.org >> > Koha(a)lists.katipo.co.nz >> > Unsubscribe: https://lists.katipo.co.nz/mailman/listinfo/koha

1 0

Frameworks
by Carlo Dumontet 23 Jun '21

23 Jun '21

A plea for help to the Koha pundits. My Library has far too many bib frameworks. Koha does not allow me to delete the unwanted ones because they have all been used (sometimes only once). Is there a way of by-passing this restriction? Many thanks for your help Carlo

2 1