- Koha - lists.katipo.co.nz

Doubt on Koha Windows version
by vimal kumar 07 Jan '06

07 Jan '06

Hello Koha users, Is Koha Win version stable to use in an actual library environment like Koha in Linux. Also I would like to list of libraries in India using Koha. Vimal kumar Asian School of Business Trivandrum India Vimal --------------------------------- Yahoo! Photos Got holiday prints? See all the ways to get quality prints in your hands ASAP.

1 0

Thank you all! Now I got to do some work...
by Marty Jongepier 07 Jan '06

07 Jan '06

I will probably be back for more help later, but the initial setup of Koha is done! I could say, not bad for a guy who never worked with Linux before, but it probably is more all your great help and amazing patience... Thanks again... Marty Jongepier Blue Jay Design and Drafting www3.sympatico.ca/bluejaydesign

1 0

(no subject)
by JIT lib 06 Jan '06

06 Jan '06

Hi Everybody I have just installed koha window for managing our library. The server information is as follows. Server information Koha version2.2.4 OS version Microsoft Windows XP [Version 5.1.2600] Perl version5.008007 MySQL versionmysql Ver 12.22 Distrib 4.0.26, for Win32 (ia32) I want to know how I will be able to work and create authority list.

2 1

Something new with bulkmarcimport.pl
by Andro Gagne 06 Jan '06

06 Jan '06

Messrs. Vahau, Laurent, and Hedges, Thanks again for your assistance with my bulkmarcimport.pl and @INC issue. With your help, I was able to import a bunch of MARC21 records using bulkmarcimport.pl. Unfortunately, I also saw a large number of error messages that make me suspect that a large number of the records were not imported. Most of the error messages read like this: "DBD::mysql::db do failed: Access denied for user: 'myuserid@localhost' to database 'libcat' at /usr/local/koha/intranet/modules/C4/Biblio.pm line 331." A few of the error messages were exactly the same as the one above, except that the Biblio.pm line cited was 426. The last line of bulkmarcimport.pl's screen output was: "1572 MARC record done in 731.838590145111 seconds." When I searched for some of the records using either the OPAC user interface or the librarian interface, a bunch of them clearly had been imported. I read the Biblio.pm code pertaining to the code lines cited, but I'm not yet familiar enough with the Koha code to figure out what went wrong. I also wasn't able to figure out a way to determine how many records there now are in the OPAC. ("*" apparently cannot be used to search for all possible values in a field.) Can you tell me what the error messages cited above were trying to tell me? Does "1572 MARC record done in 731.838590145111 seconds" mean that 1,572 records actually were imported into the OPAC database? Is there a way I can quickly double check how many records there are in the OPAC? Thanks in advance for your assistance. Best regards, Andro P. Gagné P.O. Box 715 Canandaigua, NY 14424

3 2

Shelflist report
by David Miner 06 Jan '06

06 Jan '06

Good day, How do I make Koha produce a shelflist of items in the library for inventory purposes? There does not seem to be one under Reports. Thanks, David David R. Miner Voice: (850) 644-8107 Assistant In Information Studies Fax: (850) 644-6253 College of Information E-mail: miner(a)ci.fsu.edu The Florida State University Tallahassee, FL 32306-2100

2 1

inserting book coverpage pictur
by vimal kumar 05 Jan '06

05 Jan '06

Dear Koha users, Iam a newbie of Koha. How can I insert cover picture of book in to catalogue and display in OPAC Vimal kumar Asian School of Business Trivandrum Kerala India Vimal --------------------------------- Yahoo! Photos Ring in the New Year with Photo Calendars. Add photos, events, holidays, whatever.

1 0

Problem while entering.
by Priyanka Mishra 05 Jan '06

05 Jan '06

---------- Forwarded message ---------- From: Priyanka Mishra <mishra.priyankaa(a)gmail.com> Date: Jan 5, 2006 12:30 PM Hello Sir, I am again in a problem ,although I remove the entries from the software and then serach ,it is giving null result.But when i again enter another data with the same barcode then it shows error saying that "barcode already exists .What shall i be doing? priyanka -- The Secret to be Happy is to make others believe that they are the cause of it!! Al Batt -- The Secret to be Happy is to make others believe that they are the cause of it!! Al Batt

1 0

Re: [Koha] I need to add a path to @INC for KOHA, how?
by Andro Gagne 04 Jan '06

04 Jan '06

Mr. Laurent, At 09:32 AM 1/3/06 +0100, Henri-Damien Laurent wrote: >Normally, >when using a koha script, you need to set two environment variables. >PERL5LIB and KOHA_CONF >KOHA_CONF contains the path to your koha.conf >PERL5LIB the path to your koha directories/intranet/modules on a >standard install. > >You can set them with export command as such : >export KOHA_CONF=/path/to/koha.conf >export PERL5LIB=/path/to/koha/intranet/modules >And then you can launch your scripts. Thank you for your helpful reply. I understand that the setting of these environment variables is necessary. That makes sense to me, and I don't have any problem with it. What I don't understand is why Mr. Jongepier and I are having this problem in the first place. Either Koha is programmed to set these variables on its own when it is started up, or it isn't. If it is supposed to set these variables when being started, why is it not doing so? I believe I followed the installation instructions very faithfully, so I have reason to expect that Koha will start up properly and set the variables it needs to be set. If Koha is not programmed to set these variables on its own when it is started up, clearly it is my responsibility to set these variables. But if the latter is the case, why didn't the installation instructions tell me this and tell me how the variable setting needs to be done so that Koha's environment variables are set up properly when Koha is started up? (I am referring to the installation instructions that were available at www.kohadocs.org last June.) All I'm trying to do is to understand where the real problem lies so that, hopefully, I can fix the real problem--especially if I am the one who caused the problem in some way--rather than applying what seems like a Band-Aid and not understanding where things went wrong. The Band-Aid approach probably will work for a while, but it is likely not to be as good a fix as fixing the underlying problem, especially as Koha gets upgraded over time. I really want to show the museum--and other organizations that cannot afford integrated library systems that have prices in the 5- or 6-figure range--that Koha can do the job they need to be done. If you can help me understand where the underlying problem is in regard to setting environment variables for Koha, I will appreciate it very much. I would be glad to send any information needed about how I installed Koha to solve this issue. Thank you for your patience and understanding. Andro P. Gagné P.O. Box 715 Canandaigua, NY 14424

3 2

Re: [Koha] I need to add a path to @INC for KOHA, how?
by Andro Gagne 04 Jan '06

04 Jan '06

Mr. Hedges, At 06:58 PM 1/3/06 -0500, you wrote: >You don't normally need to worry about these environment variables, unless >you are running one of the exceptional command-line scripts like >bulkmarcimport.pl. The routine Koha functions should be no problem. > >When you do have some reason to run a special-use script like >bulkmarcimport.pl, you somehow need to tell the script where you installed >Koha. My Koha (and koha.conf and modules) may have been installed in a >completely different location than yours. > >Stephen Thank you very much for your follow-up on this. I guess I didn't expect bulkmarcimport.pl to have different set-up requirements than Koha does. I saw it as being a part of Koha. I will try the advice I've been given by Mr. Vahau, Mr. Laurent, and yourself and see how things go. Many thanks to all three of you. Best regards, Andro P. Gagné P.O. Box 715 Canandaigua, NY 14424

1 0

To implement koha
by javier＠ayto-daganzo.org 04 Jan '06

04 Jan '06

Hello to all: We are implanting koha in a library in Daganzo, a town of España.This project we want it integramente to translate Spanish. We are having problem with script to pass the files tmpl to po in the part of opac. Can you pass somebody the file in format po of opac-tmpl/default/en to be able to translate it? Another problem that we are having is with Z39.50 and at the time of concerning registry marc of other libraries. Me podeis on the matter to pass information of like forming it? Happy 2006

1 0