- Koha - lists.katipo.co.nz

Patron PC management interface
by Joe Tho 20 Jun '08

20 Jun '08

Hello all you Koha people, Has anyone used a 3rd party PC management program, interfacing with Koha via sip2? I want to use LibraryMetricks, and they don't have any customers using Koha (that they are aware of). For example, a patron sits down at a public access library computer, but must log in. Usage is timed, etc. Log in is based on the Koha patron list, so this management program must communicate with Koha. Thus, my question. Thanks, Joe Kansas, United States * * * * * * * * * * * * * * * * Joe Tholen *\_ * Automation Consultant * * SEK Regional Library System * * Office Phone: (620)365-5136 * * Office Fax: (620)365-5137 * * jtholen(a)sekls.org * * * * * * * * * * * * * * * * * *

1 0

Re: [Koha] MySQL problem
by BWS Johnson 20 Jun '08

20 Jun '08

Salvete! >1. INSTALL.debian (basic install procedures for Debian) >2. Koha Noobie guide (Installing from scratch if you haven't used Linux before) Any chance of naming that Koha Installation Guide for Newbies or some such thing so it doesn't become muddled with me newbie guide? Just don't want to confuse already confuddled folks even further :D Cheers, Brooke

1 0

Re: [Koha] MySQL problem
by Michael Sauers 20 Jun '08

20 Jun '08

Ok, next question. I recall creating a root password for MySQL after installing it but these instructions say to not log in as root. So, as far as I know I’ve not yet created any MySQL users/passwords. I’m assuming I need to do this first…? Sorry for the noob questions but this is a giant experiment to see how easy (or not) this is for someone of extensive Windows experience and beginner-level Linux experience (i.e. Me) so we can tell our librarians across the state how “easy” it is to install. --------------------------------------------------------------- Michael Sauers, Technology Innovation Librarian Nebraska Library Commission The Atrium, 1200 N Street, Suite 120 Lincoln, NE 68508-2023 402-471-2045 800-307-2665 (NE only) Fax: 402-471-2083 msauers(a)nlc.state.ne.us http://nlc.state.ne.us/ http://www.travelinlibrarian.info/ --------------------------------------------------------------- From: Matt Burkhardt [mailto:mlb@imparisystems.com] Sent: Thursday, June 19, 2008 4:44 PM To: Michael Sauers Subject: Re: [Koha] MySQL problem Hey Michael, It just means to run some commands within the mysql shell. There are several different ways to do this. Perhaps the easiest is to get to the command line - just open a terminal window (in Linux) or a DOS command window (in Windows) and type: mysql -u username -p and it should ask you for the mysql password associated with the username. Enter that, and it will say mysql> just enter that line show variables where variable_name LIKE "character_set%" OR variable_name LIKE "collation%"; and you'll get the list. On Thu, 2008-06-19 at 13:38 -0500, Michael Sauers wrote: Ok, next question RE: http://wiki.koha.org/doku.php?id=encodingscratchpad MySQL – Server Configuration – I’ve added the four lines listed to the my.cnf file. It now says to “connect to mysql ad the (non-root) user and type:” I have no idea how to do this. --------------------------------------------------------------- Michael Sauers, Technology Innovation Librarian Nebraska Library Commission The Atrium, 1200 N Street, Suite 120 Lincoln, NE 68508-2023 402-471-2045 800-307-2665 (NE only) Fax: 402-471-2083 msauers(a)nlc.state.ne.us http://nlc.state.ne.us/ http://www.travelinlibrarian.info/ --------------------------------------------------------------- _______________________________________________ Koha mailing list Koha(a)lists.katipo.co.nz http://lists.katipo.co.nz/mailman/listinfo/koha Matt Burkhardt, MSTM President Impari Systems, Inc. 401 Rosemont Avenue Frederick, MD 21701 mlb(a)imparisystems.com www.imparisystems.com (301) 644-3911

5 7

Re: [Koha] Koha3 beta 2 on opensuse 11.0
by Ricardo Dias Marques 19 Jun '08

19 Jun '08

Hi Brendan, On Thu, Jun 19, 2008 at 10:10 PM, Brendan Gallagher <gallabr(a)biblio.org> wrote: > All of my errors went away when I used the DVD version of the install > instead of the Live-CD that I have been using. I had trouble installing > some of the perl-modules and using the modules off of the DVD fixed all of > the problems. Thanks for all the help guys. Great! I'm glad to hear that using the openSUSE 11.0 DVD (instead of using the Live-CD) solved your problems with the Perl Modules installation. Thanks for your feedback! :) Best wishes, Ricardo Dias Marques lists AT ricmarques DOT net

1 0

Koha3 beta 2 on opensuse 11.0
by gallabr＠biblio.org 19 Jun '08

19 Jun '08

Hi All - This is an error I get when trying to install MARC::Charset through cpan on opensuse 11.0 --setting up the dependencies for Koha3. If anyone has any ideas or leads with this that would be great. thanks, Brendan compiling marc8/utf8 database, please be patient Unicode::UCD: failed to find UnicodeData.txt in lib /usr/lib/perl5/5.10.0/i586-linux-thread-multi /usr/lib/perl5/5.10.0 /usr/lib/perl5/site_perl/5.10.0/i586-linux-thread-multi /usr/lib/perl5/site_perl/5.10.0 /usr/lib/perl5/vendor_perl/5.10.0/i586-linux-thread-multi /usr/lib/perl5/vendor_perl/5.10.0 /usr/lib/perl5/vendor_perl . at lib/MARC/Charset/Compiler.pm line 107 Warning: No success on command[/usr/bin/perl Makefile.PL] ESUMMERS/MARC-Charset-1.0.tar.gz /usr/bin/perl Makefile.PL -- NOT OK Running make test Make had some problems, won't test Running make install Make had some problems, won't install Failed during this command: ESUMMERS/MARC-Charset-1.0.tar.gz : writemakefile NO '/usr/bin/perl Makefile.PL' returned status 512 -------------------------------------------------------------------- mail2web.com - Microsoft® Exchange solutions from a leading provider - http://link.mail2web.com/Business/Exchange

3 2

PERL Module installation problem
by Michael Sauers 19 Jun '08

19 Jun '08

Hello everyone. I'm working on installing Koha for the first time and I've run into a problem. I've got Debian installed and in following the instructions at http://www.kohadocs.org/Installing_Koha_on_Debian_sarge.html I've got a problem in step 3.1.6. When typing in the command: Perl -MCPAN -e 'install "Net::Z3950::ZOOM"' A whole bunch happens then it stops with the following: /usr/bin/ld: cannot find -lgcrypt collect2: ld returned 1 exit status make: *** [blib/arch/auto/Net/Z3950/ZOOM/ZOOM.so] Error 1 /usr/bin/make -- NOT OK Running make test Can't test without successful make Running make install make had returned bad status, install seems impossible I'm a Linux newbie with a bit of experience but at this point I'm stuck. I've attached the full transcript of what's happened. I'm hoping there's a simple solution. Thanks for any help you can provide. --------------------------------------------------------------- Michael Sauers, Technology Innovation Librarian Nebraska Library Commission The Atrium, 1200 N Street, Suite 120 Lincoln, NE 68508-2023 402-471-2045 800-307-2665 (NE only) Fax: 402-471-2083 msauers(a)nlc.state.ne.us <mailto:msauers@nlc.state.ne.us> http://nlc.state.ne.us/ <http://nlc.state.ne.us/> http://www.travelinlibrarian.info/ <http://www.travelinlibrarian.info/> ---------------------------------------------------------------

3 3

zebrasrv
by Adonys Betancourt Leon 19 Jun '08

19 Jun '08

I want the zebra run ever start the system without having to log in. How can I do it. (The comand "sebrasrv -f /etc/koha/koha-conf.xml")

2 1

Barcodes Generator Error
by Yonas Alemayehu 19 Jun '08

19 Jun '08

Hi When I click Generate Barcodes button It displays internal Server Error. Here is the koha log error. [Thu Jun 19 10:33:05 2008] [error] [client 10.0.80.5] Can't locate PDF/API2/PDF/Utils.pm in @INC (@INC contains: /usr/local/koha/intranet/modules /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7 /usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 .) at /usr/local/koha/intranet/cgi-bin/barcodes/barcodesGenerator.pl line 33., referer: http://10.0.80.5:8080/cgi-bin/koha/barcodes/barcodes.pl [Thu Jun 19 10:33:05 2008] [error] [client 10.0.80.5] BEGIN failed--compilation aborted at /usr/local/koha/intranet/cgi-bin/barcodes/barcodesGenerator.pl line 33., referer: http://10.0.80.5:8080/cgi-bin/koha/barcodes/barcodes.pl [Thu Jun 19 10:33:05 2008] [error] [client 10.0.80.5] Premature end of script headers: barcodesGenerator.pl, referer: http://10.0.80.5:8080/cgi-bin/koha/barcodes/barcodes.pl Any help is appreciated.

2 1

Barcodes Generator Error
by Yonas Alemayehu 19 Jun '08

19 Jun '08

Hi When I click Generate Barcodes button It displays internal Server Error. Here is the koha log error. [Thu Jun 19 10:33:05 2008] [error] [client 10.0.80.5] Can't locate PDF/API2/PDF/Utils.pm in @INC (@INC contains: /usr/local/koha/intranet/modules /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7 /usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 .) at /usr/local/koha/intranet/cgi-bin/barcodes/barcodesGenerator.pl line 33., referer: http://10.0.80.5:8080/cgi-bin/koha/barcodes/barcodes.pl [Thu Jun 19 10:33:05 2008] [error] [client 10.0.80.5] BEGIN failed--compilation aborted at /usr/local/koha/intranet/cgi-bin/barcodes/barcodesGenerator.pl line 33., referer: http://10.0.80.5:8080/cgi-bin/koha/barcodes/barcodes.pl [Thu Jun 19 10:33:05 2008] [error] [client 10.0.80.5] Premature end of script headers: barcodesGenerator.pl, referer: http://10.0.80.5:8080/cgi-bin/koha/barcodes/barcodes.pl OS:- Fedora 8 Koha Ver:- 2.2.9 MySql Ver :- 5.0.45 Perl Ver:- 5.8.8 Any help is appreciated.

1 0

eplates in koha
by Adonys Betancourt Leon 19 Jun '08

19 Jun '08

I want to create a new page in Koha3, I know that I have to create a new .pl and .tmlp how can I to creat a link between these two files. thanks

2 1