[Kete] kete 1.2 cannot add item in

[hoa lean]

Hi all.

Just to let you know that I sucessully make the Zebra work. But then there is another issue.
When I add new item (can be a topic, an image, ...), kete remove all the previous one.
Or even after 1 item was added in, after I click "Browse", all gone.

Do you have any ideas why it happens like that ?
I do the rebuild search engine, but no help.


--- On Thu, 11/3/10, hoa lean <anhoale at yahoo.com> wrote:

From: hoa lean <anhoale at yahoo.com>
Subject: Re: [Kete] have issue with zebra kete 1.2
To: Kete at lists.katipo.co.nz, "Andy Robertson" <andrew.robertson at natlib.govt.nz>
Received: Thursday, 11 March, 2010, 8:06 AM

Thanks Andy and Walter,

I will try uninstall the yaz and zebra. 
Yes, I use yast2 and find that libxslt and libxslt-devel already installed.
I install it from source, by download the file from indexdata webpage, put it in the 
/usr/local/src  then tar it, then do the installation from the instruction 




mkdir /usr/local/src 

@host: # chmod 777
/usr/local/src 

@host: # cd /usr/local/src


@host: # wget
http://ftp.indexdata.dk/pub/yaz/yaz-4.0.2.tar.gz 

@host: # tar xfz yaz-4.0.2.tar.gz


@host: # wget
http://ftp.indexdata.dk/pub/zebra/idzebra-2.0.43.tar.gz 

@host: # tar xfz idzebra-2.0.43.tar.gz


@host: # cd yaz-4.0.2


@host: # ./configure
--prefix=/usr 

@host: # make 

@host: # sudo make install


@host: # cd ../idzebra-2.0.43


@host: # ./configure
--prefix=/usr --with-yaz=../yaz-4.0.2 --enable-mod-alvis 

@host: # make 

@host: # sudo make install



Oh, for Walter I also attach 2 zebra-public.cfg files, the original and the one I edit it to match the real  folder on the server.

Thanks a lot guys,
An
--- On Thu, 11/3/10, Andy Robertson <andrew.robertson at natlib.govt.nz> wrote:

From: Andy Robertson <andrew.robertson at natlib.govt.nz>
Subject: Re: [Kete] have issue with zebra kete 1.2
To: Kete at lists.katipo.co.nz, anhoale at yahoo.com
Received: Thursday, 11 March, 2010, 7:14 AM

Hi,

You didn't mention if you found precompiled binaries or if you compiled from source ?  

Also are the libxslt libxslt-devel yast packages on your machine, my first impression when you emailed the list was that the install using the suse yast facility was good apart from you were missing these support libaries.  

If you compile from source then heres my notes on installing yaz and zebra.

I use version idzebra-2.0.36 and yaz-3.0.45. 

download yaz and zebra
wget http://ftp.indexdata.dk/pub/yaz/yaz-3.0.45.tar.gz
wget http://ftp.indexdata.dk/pub/zebra/idzebra-2.0.36.tar.gz

You need to install yaz first.   Uncompress and untar them into a temporary work directory.  We'll install them into /usr/local/ as this is where the config files in the kete install looks for the libraries.

gtar xvzf yaz-3.0.45.tar.gz
cd yaz-3.0.45

 ./configure --prefix=/usr/local --disable-static
make
make install


gtar xvzf idzebra-2.0.36.tar.gz
cd idzebra-2.0.36

./configure --prefix=/usr/local --with-yaz=/usr/local/bin --disable-static
make
make install

 





      
-----Inline Attachment Follows-----

_______________________________________________
Kete mailing list
Kete at lists.katipo.co.nz
http://lists.katipo.co.nz/cgi-bin/mailman/listinfo/kete