I was going to add bar codes at 6 am this morning but got this error instead. I had just upgraded to 20.05. Can't open /var/log/koha/library/opac-error.log (Permission denied) at /usr/share/perl5/Log/Log4perl/Appender/File.pm line 151. For help, please send mail to the webmaster ([no address given]<mailto:%5Bno%20address%20given%5D>), giving this error message and the time and date of the error. What can I do? Br Raphael Prince of Peace Abbey Oceanside CA Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
Hi You should give read/wite permissions to your koha user to the mentioned fiile. Even better, to the whole directory since koha will write all logs to that folder /var/log/koha/library/ Note that "library" is the instance name of your library. Regards, Alvaro |----------------------------------------------------------------------------------------| Stay safe / Cuídate/ Reste sécurisé *7* Switch off as you go / Apaga lo que no usas / Débranchez au fur et à mesure. *q *Recycle always / Recicla siempre / Recyclez toujours P Print only if absolutely necessary / Imprime solo si es necesario / Imprimez seulement si nécessaire Le sam. 6 juin 2020 à 08:14, Raphael Meyer <rpm143@live.com> a écrit :
I was going to add bar codes at 6 am this morning but got this error instead. I had just upgraded to 20.05.
Can't open /var/log/koha/library/opac-error.log (Permission denied) at /usr/share/perl5/Log/Log4perl/Appender/File.pm line 151.
For help, please send mail to the webmaster ([no address given]<mailto:%5Bno%20address%20given%5D>), giving this error message and the time and date of the error.
What can I do?
Br Raphael Prince of Peace Abbey Oceanside CA Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
_______________________________________________
Koha mailing list http://koha-community.org Koha@lists.katipo.co.nz Unsubscribe: https://lists.katipo.co.nz/mailman/listinfo/koha
Hi Alvaro, Is it common to have to reset read/write permissions after an upgrade? Thanks. best, Dawson On Sat, Jun 6, 2020 at 12:33 PM Alvaro Cornejo <cornejo.alvaro@gmail.com> wrote:
Hi
You should give read/wite permissions to your koha user to the mentioned fiile. Even better, to the whole directory since koha will write all logs to that folder
/var/log/koha/library/
Note that "library" is the instance name of your library.
Regards,
Alvaro
|----------------------------------------------------------------------------------------| Stay safe / Cuídate/ Reste sécurisé *7* Switch off as you go / Apaga lo que no usas / Débranchez au fur et à mesure. *q *Recycle always / Recicla siempre / Recyclez toujours P Print only if absolutely necessary / Imprime solo si es necesario / Imprimez seulement si nécessaire
Le sam. 6 juin 2020 à 08:14, Raphael Meyer <rpm143@live.com> a écrit :
I was going to add bar codes at 6 am this morning but got this error instead. I had just upgraded to 20.05.
Can't open /var/log/koha/library/opac-error.log (Permission denied) at /usr/share/perl5/Log/Log4perl/Appender/File.pm line 151.
For help, please send mail to the webmaster ([no address given]<mailto:
%5Bno%20address%20given%5D>),
giving this error message and the time and date of the error.
What can I do?
Br Raphael Prince of Peace Abbey Oceanside CA Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
_______________________________________________
Koha mailing list http://koha-community.org Koha@lists.katipo.co.nz Unsubscribe: https://lists.katipo.co.nz/mailman/listinfo/koha
_______________________________________________
Koha mailing list http://koha-community.org Koha@lists.katipo.co.nz Unsubscribe: https://lists.katipo.co.nz/mailman/listinfo/koha
Hi Dawson, I´m not expert in koha, and can´t confirm you this. Personally, is the first time I see this. As is a brand new version, it might be a bug in the upgrade process. Regards, Alvaro |----------------------------------------------------------------------------------------| Stay safe / Cuídate/ Reste sécurisé *7* Switch off as you go / Apaga lo que no usas / Débranchez au fur et à mesure. *q *Recycle always / Recicla siempre / Recyclez toujours P Print only if absolutely necessary / Imprime solo si es necesario / Imprimez seulement si nécessaire Le sam. 6 juin 2020 à 19:04, Dawson Weber <algiers@rfmz-dw.com> a écrit :
Hi Alvaro,
Is it common to have to reset read/write permissions after an upgrade?
Thanks. best, Dawson
On Sat, Jun 6, 2020 at 12:33 PM Alvaro Cornejo <cornejo.alvaro@gmail.com> wrote:
Hi
You should give read/wite permissions to your koha user to the mentioned fiile. Even better, to the whole directory since koha will write all logs to that folder
/var/log/koha/library/
Note that "library" is the instance name of your library.
Regards,
Alvaro
|----------------------------------------------------------------------------------------| Stay safe / Cuídate/ Reste sécurisé *7* Switch off as you go / Apaga lo que no usas / Débranchez au fur et à mesure. *q *Recycle always / Recicla siempre / Recyclez toujours P Print only if absolutely necessary / Imprime solo si es necesario / Imprimez seulement si nécessaire
Le sam. 6 juin 2020 à 08:14, Raphael Meyer <rpm143@live.com> a écrit :
I was going to add bar codes at 6 am this morning but got this error instead. I had just upgraded to 20.05.
Can't open /var/log/koha/library/opac-error.log (Permission denied) at /usr/share/perl5/Log/Log4perl/Appender/File.pm line 151.
For help, please send mail to the webmaster ([no address given]<mailto:
%5Bno%20address%20given%5D>),
giving this error message and the time and date of the error.
What can I do?
Br Raphael Prince of Peace Abbey Oceanside CA Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
_______________________________________________
Koha mailing list http://koha-community.org Koha@lists.katipo.co.nz Unsubscribe: https://lists.katipo.co.nz/mailman/listinfo/koha
_______________________________________________
Koha mailing list http://koha-community.org Koha@lists.katipo.co.nz Unsubscribe: https://lists.katipo.co.nz/mailman/listinfo/koha
Hi Dawson, There was a change in 20.05. Before we silently ignored wrong permissions, now we force the logging system to be setup correctly (bug 25172) We should certainly deal with that problem during the upgrade process. I will see what can be done. The solution suggested by Alvaro is the correct one, give permission to your koha user by changing the owner of the Koha log directory: $ chown -R USER:USER /var/log/koha/INSTANCE Regards, Jonathan https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=25172 Le dim. 7 juin 2020 à 02:04, Dawson Weber <algiers@rfmz-dw.com> a écrit :
Hi Alvaro,
Is it common to have to reset read/write permissions after an upgrade?
Thanks. best, Dawson
On Sat, Jun 6, 2020 at 12:33 PM Alvaro Cornejo <cornejo.alvaro@gmail.com> wrote:
Hi
You should give read/wite permissions to your koha user to the mentioned fiile. Even better, to the whole directory since koha will write all logs to that folder
/var/log/koha/library/
Note that "library" is the instance name of your library.
Regards,
Alvaro
|----------------------------------------------------------------------------------------| Stay safe / Cuídate/ Reste sécurisé *7* Switch off as you go / Apaga lo que no usas / Débranchez au fur et à mesure. *q *Recycle always / Recicla siempre / Recyclez toujours P Print only if absolutely necessary / Imprime solo si es necesario / Imprimez seulement si nécessaire
Le sam. 6 juin 2020 à 08:14, Raphael Meyer <rpm143@live.com> a écrit :
I was going to add bar codes at 6 am this morning but got this error instead. I had just upgraded to 20.05.
Can't open /var/log/koha/library/opac-error.log (Permission denied) at /usr/share/perl5/Log/Log4perl/Appender/File.pm line 151.
For help, please send mail to the webmaster ([no address given]<mailto:
%5Bno%20address%20given%5D>),
giving this error message and the time and date of the error.
What can I do?
Br Raphael Prince of Peace Abbey Oceanside CA Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
_______________________________________________
Koha mailing list http://koha-community.org Koha@lists.katipo.co.nz Unsubscribe: https://lists.katipo.co.nz/mailman/listinfo/koha
_______________________________________________
Koha mailing list http://koha-community.org Koha@lists.katipo.co.nz Unsubscribe: https://lists.katipo.co.nz/mailman/listinfo/koha
_______________________________________________
Koha mailing list http://koha-community.org Koha@lists.katipo.co.nz Unsubscribe: https://lists.katipo.co.nz/mailman/listinfo/koha
Hi Jonathan, One quick question about running the command you describe: $ chown -R USER:USER /var/log/koha/INSTANCE What USER should I be inserting into this? I understand INSTANCE is the name of my library. I've tried the username that I log in with via Terminal and get a list of folders which all end with "Operation not permitted." I've also tried my superlibrarian username and that gets an "invalid user" error. Thank you for your help! best regards, Dawson On Sun, Jun 7, 2020 at 11:55 PM Jonathan Druart < jonathan.druart@bugs.koha-community.org> wrote:
Hi Dawson,
There was a change in 20.05. Before we silently ignored wrong permissions, now we force the logging system to be setup correctly (bug 25172)
We should certainly deal with that problem during the upgrade process. I will see what can be done.
The solution suggested by Alvaro is the correct one, give permission to your koha user by changing the owner of the Koha log directory: $ chown -R USER:USER /var/log/koha/INSTANCE
Regards, Jonathan
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=25172
Le dim. 7 juin 2020 à 02:04, Dawson Weber <algiers@rfmz-dw.com> a écrit :
Hi Alvaro,
Is it common to have to reset read/write permissions after an upgrade?
Thanks. best, Dawson
On Sat, Jun 6, 2020 at 12:33 PM Alvaro Cornejo <cornejo.alvaro@gmail.com
wrote:
Hi
You should give read/wite permissions to your koha user to the
mentioned
fiile. Even better, to the whole directory since koha will write all logs to that folder
/var/log/koha/library/
Note that "library" is the instance name of your library.
Regards,
Alvaro
|----------------------------------------------------------------------------------------|
Stay safe / Cuídate/ Reste sécurisé *7* Switch off as you go / Apaga lo que no usas / Débranchez au fur et à mesure. *q *Recycle always / Recicla siempre / Recyclez toujours P Print only if absolutely necessary / Imprime solo si es necesario / Imprimez seulement si nécessaire
Le sam. 6 juin 2020 à 08:14, Raphael Meyer <rpm143@live.com> a écrit :
I was going to add bar codes at 6 am this morning but got this error instead. I had just upgraded to 20.05.
Can't open /var/log/koha/library/opac-error.log (Permission denied)
at
/usr/share/perl5/Log/Log4perl/Appender/File.pm line 151.
For help, please send mail to the webmaster ([no address given]<mailto: %5Bno%20address%20given%5D>), giving this error message and the time and date of the error.
What can I do?
Br Raphael Prince of Peace Abbey Oceanside CA Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
_______________________________________________
Koha mailing list http://koha-community.org Koha@lists.katipo.co.nz Unsubscribe: https://lists.katipo.co.nz/mailman/listinfo/koha
_______________________________________________
Koha mailing list http://koha-community.org Koha@lists.katipo.co.nz Unsubscribe: https://lists.katipo.co.nz/mailman/listinfo/koha
_______________________________________________
Koha mailing list http://koha-community.org Koha@lists.katipo.co.nz Unsubscribe: https://lists.katipo.co.nz/mailman/listinfo/koha
I'd be INSTANCE-koha El vie., 3 de julio de 2020 22:29, Dawson Weber <algiers@rfmz-dw.com> escribió:
Hi Jonathan,
One quick question about running the command you describe:
$ chown -R USER:USER /var/log/koha/INSTANCE
What USER should I be inserting into this? I understand INSTANCE is the name of my library.
I've tried the username that I log in with via Terminal and get a list of folders which all end with "Operation not permitted." I've also tried my superlibrarian username and that gets an "invalid user" error.
Thank you for your help! best regards, Dawson
On Sun, Jun 7, 2020 at 11:55 PM Jonathan Druart < jonathan.druart@bugs.koha-community.org> wrote:
Hi Dawson,
There was a change in 20.05. Before we silently ignored wrong permissions, now we force the logging system to be setup correctly (bug 25172)
We should certainly deal with that problem during the upgrade process. I will see what can be done.
The solution suggested by Alvaro is the correct one, give permission to your koha user by changing the owner of the Koha log directory: $ chown -R USER:USER /var/log/koha/INSTANCE
Regards, Jonathan
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=25172
Le dim. 7 juin 2020 à 02:04, Dawson Weber <algiers@rfmz-dw.com> a écrit :
Hi Alvaro,
Is it common to have to reset read/write permissions after an upgrade?
Thanks. best, Dawson
On Sat, Jun 6, 2020 at 12:33 PM Alvaro Cornejo <
cornejo.alvaro@gmail.com
wrote:
Hi
You should give read/wite permissions to your koha user to the
mentioned
fiile. Even better, to the whole directory since koha will write all logs to that folder
/var/log/koha/library/
Note that "library" is the instance name of your library.
Regards,
Alvaro
|----------------------------------------------------------------------------------------|
Stay safe / Cuídate/ Reste sécurisé *7* Switch off as you go / Apaga lo que no usas / Débranchez au fur et à mesure. *q *Recycle always / Recicla siempre / Recyclez toujours P Print only if absolutely necessary / Imprime solo si es necesario / Imprimez seulement si nécessaire
Le sam. 6 juin 2020 à 08:14, Raphael Meyer <rpm143@live.com> a écrit :
I was going to add bar codes at 6 am this morning but got this
error
instead. I had just upgraded to 20.05.
Can't open /var/log/koha/library/opac-error.log (Permission denied) at /usr/share/perl5/Log/Log4perl/Appender/File.pm line 151.
For help, please send mail to the webmaster ([no address given]<mailto: %5Bno%20address%20given%5D>), giving this error message and the time and date of the error.
What can I do?
Br Raphael Prince of Peace Abbey Oceanside CA Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
_______________________________________________
Koha mailing list http://koha-community.org Koha@lists.katipo.co.nz Unsubscribe: https://lists.katipo.co.nz/mailman/listinfo/koha
_______________________________________________
Koha mailing list http://koha-community.org Koha@lists.katipo.co.nz Unsubscribe: https://lists.katipo.co.nz/mailman/listinfo/koha
_______________________________________________
Koha mailing list http://koha-community.org Koha@lists.katipo.co.nz Unsubscribe: https://lists.katipo.co.nz/mailman/listinfo/koha
_______________________________________________
Koha mailing list http://koha-community.org Koha@lists.katipo.co.nz Unsubscribe: https://lists.katipo.co.nz/mailman/listinfo/koha
Thanks, Alvaro and Tomas. Looks like that did the trick! best regards, Dawson On Fri, Jul 3, 2020 at 7:18 PM Tomas Cohen Arazi <tomascohen@gmail.com> wrote:
I'd be INSTANCE-koha
El vie., 3 de julio de 2020 22:29, Dawson Weber <algiers@rfmz-dw.com> escribió:
Hi Jonathan,
One quick question about running the command you describe:
$ chown -R USER:USER /var/log/koha/INSTANCE
What USER should I be inserting into this? I understand INSTANCE is the name of my library.
I've tried the username that I log in with via Terminal and get a list of folders which all end with "Operation not permitted." I've also tried my superlibrarian username and that gets an "invalid user" error.
Thank you for your help! best regards, Dawson
On Sun, Jun 7, 2020 at 11:55 PM Jonathan Druart < jonathan.druart@bugs.koha-community.org> wrote:
Hi Dawson,
There was a change in 20.05. Before we silently ignored wrong permissions, now we force the logging system to be setup correctly (bug 25172)
We should certainly deal with that problem during the upgrade process. I will see what can be done.
The solution suggested by Alvaro is the correct one, give permission to your koha user by changing the owner of the Koha log directory: $ chown -R USER:USER /var/log/koha/INSTANCE
Regards, Jonathan
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=25172
Le dim. 7 juin 2020 à 02:04, Dawson Weber <algiers@rfmz-dw.com> a écrit :
Hi Alvaro,
Is it common to have to reset read/write permissions after an upgrade?
Thanks. best, Dawson
On Sat, Jun 6, 2020 at 12:33 PM Alvaro Cornejo <
cornejo.alvaro@gmail.com
wrote:
Hi
You should give read/wite permissions to your koha user to the
mentioned
fiile. Even better, to the whole directory since koha will write all logs to that folder
/var/log/koha/library/
Note that "library" is the instance name of your library.
Regards,
Alvaro
|----------------------------------------------------------------------------------------|
Stay safe / Cuídate/ Reste sécurisé *7* Switch off as you go / Apaga lo que no usas / Débranchez au fur et à mesure. *q *Recycle always / Recicla siempre / Recyclez toujours P Print only if absolutely necessary / Imprime solo si es necesario / Imprimez seulement si nécessaire
Le sam. 6 juin 2020 à 08:14, Raphael Meyer <rpm143@live.com> a écrit :
I was going to add bar codes at 6 am this morning but got this
error
instead. I had just upgraded to 20.05.
Can't open /var/log/koha/library/opac-error.log (Permission denied) at /usr/share/perl5/Log/Log4perl/Appender/File.pm line 151.
For help, please send mail to the webmaster ([no address given]<mailto: %5Bno%20address%20given%5D>), giving this error message and the time and date of the error.
What can I do?
Br Raphael Prince of Peace Abbey Oceanside CA Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
_______________________________________________
Koha mailing list http://koha-community.org Koha@lists.katipo.co.nz Unsubscribe: https://lists.katipo.co.nz/mailman/listinfo/koha
_______________________________________________
Koha mailing list http://koha-community.org Koha@lists.katipo.co.nz Unsubscribe: https://lists.katipo.co.nz/mailman/listinfo/koha
_______________________________________________
Koha mailing list http://koha-community.org Koha@lists.katipo.co.nz Unsubscribe: https://lists.katipo.co.nz/mailman/listinfo/koha
_______________________________________________
Koha mailing list http://koha-community.org Koha@lists.katipo.co.nz Unsubscribe: https://lists.katipo.co.nz/mailman/listinfo/koha
participants (5)
-
Alvaro Cornejo -
Dawson Weber -
Jonathan Druart -
Raphael Meyer -
Tomas Cohen Arazi