Dear Mr. Narayana, You can go to administration Administration >> Basic Parameter >> Item Types >> New Item Type Administration >> Basic Parameter >> Authorized Values >> CCODE (Drop Down) (Add new collection code) Feel free to ask any question. Thanks and Regards R Sunil Kumar Library Technologist 9686576695 rsunil.kr@gmail.com -----Original Message----- From: koha-bounces@lists.katipo.co.nz [mailto:koha-bounces@lists.katipo.co.nz] On Behalf Of koha-request@lists.katipo.co.nz Sent: 01 September 2012 22:16 To: koha@lists.katipo.co.nz Subject: Koha Digest, Vol 83, Issue 3 Send Koha mailing list submissions to koha@lists.katipo.co.nz To subscribe or unsubscribe via the World Wide Web, visit http://lists.katipo.co.nz/mailman/listinfo/koha or, via email, send a message with subject or body 'help' to koha-request@lists.katipo.co.nz You can reach the person managing the list at koha-owner@lists.katipo.co.nz When replying, please edit your Subject line so it is more specific than "Re: Contents of Koha digest..." Today's Topics: 1. Collection code & Shelving Location (thandu venkat narayana) 2. Koha installation Problem (Mohammad Joynal Abdin) 3. Re: Koha installation Problem (Mark Tompsett) 4. Re: Koha installation Problem (Mark Tompsett) 5. Re: Collection code & Shelving Location (Olugbenga Adara) 6. Re: Zebra not updating biblios automatically in koha 3.8 (Doug Kingston) 7. Re: Zebra not updating biblios automatically in koha 3.8 (Jared Camins-Esakov) ---------------------------------------------------------------------- Message: 1 Date: Sat, 1 Sep 2012 11:32:39 +0800 (SGT) From: thandu venkat narayana <thandu_venkat@yahoo.com> To: koha@lists.katipo.co.nz Subject: [Koha] Collection code & Shelving Location Message-ID: <1346470359.48714.YahooMailClassic@web192305.mail.sg3.yahoo.com> Content-Type: text/plain; charset=utf-8 Dear Professionals, Good Morning! I am using koha 3.8.2 on Ubuntu How can I add new collection code & new Shelving Location at adding items i.e. Tag 952 $8 and 952 $c Please give guidance to create the same. Best Regards, Venkata Narayana ------------------------------ Message: 2 Date: Sat, 1 Sep 2012 11:01:00 +0600 From: Mohammad Joynal Abdin <joynal@daffodilvarsity.edu.bd> To: koha@lists.katipo.co.nz Subject: [Koha] Koha installation Problem Message-ID: <CAO0vx5Ff8afg_X7au2Z0sqNR3cqREx-jSEaUmbUOJ_r+kMWfdg@mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1 Dear All, Greetings from Mohammad Joynal Abdin Today I want to share with you all one thing that, Yesterday I tried to setup koha on Debian 6.0.1. But when I enter the command apt-get install koha it returns error like below. I added the line deb http://debian.koha-community.org/koha squeeze main in the /etc/apt/sources.list. It can be mentioned that apt-get update command executed successfully and it reports that Reading package lists...... Done. What's wrong? How can I proceed? Please suggest me. ERROR root@koha:/home/koha# apt-get install koha Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: koha : Depends: koha-common but it is not going to be installed Depends: dbconfig-common but it is not installable Depends: mysql-server but it is not installable E: Broken packages Thanking you in advance -- *With Warm Regards* Mohammad Joynal Abdin MA in ISLM, DU MCSA, MCSE Assistant Library Officer Daffodil International University Cell: 01811458896 Ext. 152 ------------------------------ Message: 3 Date: Sat, 1 Sep 2012 14:03:20 +0800 From: "Mark Tompsett" <mtompset@hotmail.com> To: "Mohammad Joynal Abdin" <joynal@daffodilvarsity.edu.bd>, <koha@lists.katipo.co.nz> Subject: Re: [Koha] Koha installation Problem Message-ID: <SNT117-DS10EB3E1AE8540118C4AEBCC6A50@phx.gbl> Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original Greetings, [snipped and edited a bit]
But when I enter the command "apt-get install koha"
Actually it is "sudo apt-get install koha-common". [snipped and edited a bit]
I added the line "deb http://debian.koha-community.org/koha squeeze main" in the /etc/apt/sources.list [file].
First, it is a bad idea to touch the default repository file! You likely messed up your repositories. The instructions you should follow are found at http://wiki.koha-community.org/wiki/Koha_3.8_on_Debian_Squeeze Those instructions say it is supposed to be "/etc/apt/sources.list.d/koha.list" that is affected. The command you should use to set up for 3.8.x in a fresh Debian (or Ubuntu -- for those lurking in the background) install is: $ echo "deb http://debian.koha-community.org/koha squeeze main" | sudo tee /etc/apt/sources.list.d/koha.list Okay, but did you do the following as well? $ wget -O- http://debian.koha-community.org/koha/gpg.asc | sudo apt-key add - --- BEGIN EXAMPLE GIVEN --- ERROR root@koha:/home/koha# apt-get install koha Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: koha : Depends: koha-common but it is not going to be installed Depends: dbconfig-common but it is not installable Depends: mysql-server but it is not installable E: Broken packages --- END EXAMPLE GIVEN --- Those dependencies are in the default repositories. You likely messed yours up or the server from which you would normally pull the updates is not reachable. To check which is true attempt the following command: $ sudo apt-get update If it has a whole bunch of error messages, then it is unreachable. If the list is very short (only the debian.koha-community.org repository), then you messed up your repositories. If it is some other case, you will need to post the output for someone else to be able to help you. My gut feeling is you messed yours up. Given that I don't have Debian, I can not provide you with a clean copy. Though, you may wish to re-install Debian OR visit http://debgen.simplylinux.ch/ *IF* you did mess it up. Reinstallation is my preference and recommendation, if there are no other systems affected. Hope this helps somehow. #include <stddisclaimer.h> GPML, Mark Tompsett ------------------------------ Message: 4 Date: Sat, 1 Sep 2012 14:03:47 +0800 From: "Mark Tompsett" <mtompset@hotmail.com> To: "Mohammad Joynal Abdin" <joynal@daffodilvarsity.edu.bd>, <koha@lists.katipo.co.nz> Subject: Re: [Koha] Koha installation Problem Message-ID: <SNT117-DS106FAD37996F3D42B3BCFDC6A50@phx.gbl> Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original Greetings, [snipped and edited a bit]
But when I enter the command "apt-get install koha"
Actually it is "sudo apt-get install koha-common". [snipped and edited a bit]
I added the line "deb http://debian.koha-community.org/koha squeeze main" in the /etc/apt/sources.list [file].
First, it is a bad idea to touch the default repository file! You likely messed up your repositories. The instructions you should follow are found at http://wiki.koha-community.org/wiki/Koha_3.8_on_Debian_Squeeze Those instructions say it is supposed to be "/etc/apt/sources.list.d/koha.list" that is affected. The command you should use to set up for 3.8.x in a fresh Debian (or Ubuntu -- for those lurking in the background) install is: $ echo "deb http://debian.koha-community.org/koha squeeze main" | sudo tee /etc/apt/sources.list.d/koha.list Okay, but did you do the following as well? $ wget -O- http://debian.koha-community.org/koha/gpg.asc | sudo apt-key add - --- BEGIN EXAMPLE GIVEN --- ERROR root@koha:/home/koha# apt-get install koha Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: koha : Depends: koha-common but it is not going to be installed Depends: dbconfig-common but it is not installable Depends: mysql-server but it is not installable E: Broken packages --- END EXAMPLE GIVEN --- Those dependencies are in the default repositories. You likely messed yours up or the server from which you would normally pull the updates is not reachable. To check which is true attempt the following command: $ sudo apt-get update If it has a whole bunch of error messages, then it is unreachable. If the list is very short (only the debian.koha-community.org repository), then you messed up your repositories. If it is some other case, you will need to post the output for someone else to be able to help you. My gut feeling is you messed yours up. Given that I don't have Debian, I can not provide you with a clean copy. Though, you may wish to re-install Debian OR visit http://debgen.simplylinux.ch/ *IF* you did mess it up. Reinstallation is my preference and recommendation, if there are no other systems affected. Hope this helps somehow. #include <stddisclaimer.h> GPML, Mark Tompsett ------------------------------ Message: 5 Date: Sat, 1 Sep 2012 06:37:00 -0700 (PDT) From: Olugbenga Adara <gbengaadara@yahoo.com> To: koha@lists.katipo.co.nz, thandu venkat narayana <thandu_venkat@yahoo.com> Subject: Re: [Koha] Collection code & Shelving Location Message-ID: <1346506620.4165.YahooMailClassic@web162003.mail.bf1.yahoo.com> Content-Type: text/plain; charset=iso-8859-1 Hello, Go to Administration - Authorized values in the staff client. For shelving location, modify LOC, for Collection code modify CCODE Olugbenga Adara Mobile: 234 (0) 8033220288 Home: 234 (2) 8721720 Skype: gbengaadara Blog: http://gbengaadara.blogspot.com Twitter: http://twitter.com/gbengaadara Profile: http://www.linkedin.com/in/gbengaadara --- On Sat, 9/1/12, thandu venkat narayana <thandu_venkat@yahoo.com> wrote: From: thandu venkat narayana <thandu_venkat@yahoo.com> Subject: [Koha] Collection code & Shelving Location To: koha@lists.katipo.co.nz Date: Saturday, September 1, 2012, 5:32 AM Dear Professionals, Good Morning! I am using koha 3.8.2 on Ubuntu How can I add new collection code & new Shelving Location at adding items i.e. Tag 952 $8 and 952 $c Please give guidance to create the same. Best Regards, Venkata Narayana _______________________________________________ Koha mailing list? http://koha-community.org Koha@lists.katipo.co.nz http://lists.katipo.co.nz/mailman/listinfo/koha ------------------------------ Message: 6 Date: Sat, 1 Sep 2012 09:27:36 -0700 From: Doug Kingston <dpk@randomnotes.org> To: Paul <paul.a@aandc.org> Cc: Koha@lists.katipo.co.nz Subject: Re: [Koha] Zebra not updating biblios automatically in koha 3.8 Message-ID: <CAGPaoUt3EHxgyxbP8c6+t+1ZYwsEDYwNVS3iOtw09JKSTozWTA@mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1 So environment variables are not the issue. We are carefully managing those. I have tried using the new tool checkNonIndexedBiblios.pl (from patch 6566) and it indeed finds a few recent biblios that are not indexed. Using the -z option to mark them for indexing followed by a manual run of rebuild_zebra -b -v -z did not get the biblios indexed. I cranked up the debugging on zebraidx (by modifying rebuild_zebra.pl and using -v -v) and did not see any obvious errors in the output that would suggest why indexing was failing. We have applied the patch from bug 8563 ( http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=8653) which was definitely a problem for us and fixed out authorities problem. Perhaps there is a related issue here? -Doug On 31 August 2012 13:39, Paul <paul.a@aandc.org> wrote:
At 08:37 PM 8/31/2012 +0100, Elaine Bradtke wrote:
My colleagues are reporting a similar problem with 3.8.4 Downloading and editing of records seems to function normally, but once it is saved, none of the usual searches brings it up, and running a report on recently catalogued items give zero results.
mysql Ver 14.14 Distrib 5.1.63, for debian-linux-gnu (i486) using readline 6.1 Apache/2.2.16 (Debian) Zebra version:Zebra 2.0.50
Any ideas?
I have found that 3.8.x may have problems with env vars not being available to cron. Please try editing:
sudo vi /home/koha/.bashrc
Add the following two lines:
export PERL5LIB=/usr/share/koha/lib export KOHA_CONF=/etc/koha/koha-conf.**xml :x
then reboot your server. This in itself cannot do any harm, and could well cure your problem.
Best - Paul
Elaine Bradtke
On Fri, Aug 31, 2012 at 12:05 PM, sunil sharma <koha.sunil007@gmail.com> wrote:
Dear All,
I installed Koha 3.8.02 and also check latest version of koha 3.8.04 on centos 6.2, The same problem I am facing in both of these version. when
enter any new biblio, it is not updated automatically to zebra, I am using zebra latest version 2.0.54 and all cronjobs are set. I also manually check zebra functioning by ./rebuild_zebra.pl -b -a -v -z but it shows export biblios zero, but I already added some bilios to koha yet it shows exported zero. And, when I use ./rebuild_zebra.pl -b -a -v -r then it rebuild all the biblios and my all added biblio shows in result i.e. exported 10 biblios. My question is that why ./rebuild_zebra.pl -b -a -v -z
I option is
not working. where is the problem, because my zebra working fine in 3.6, is there any problem in koha 3.8. or any other issue. Please help me out.
Thanx in advance.
Sunil ______________________________**_________________ Koha mailing list http://koha-community.org Koha@lists.katipo.co.nz
http://lists.katipo.co.nz/**mailman/listinfo/koha<http://lists.katipo.co.nz/ mailman/listinfo/koha>
-- Elaine Bradtke Data Wrangler VWML English Folk Dance and Song Society | http://www.efdss.org Cecil Sharp House, 2 Regent's Park Road, London NW1 7AY Tel +44 (0) 20 7485 2206 (This number is for the English Folk Dance and Song Society in London, England. If you wish to phone me personally, send an e-mail first. I work off site) ------------------------------**------------------------------** -------------- Registered Company No. 297142 Charity Registered in England and Wales No. 305999 ------------------------------**------------------------------** --------------- "Writing about music is like dancing about architecture" --Elvis Costello (Musician magazine No. 60 (October 1983), p. 52) ______________________________**_________________ Koha mailing list http://koha-community.org Koha@lists.katipo.co.nz
http://lists.katipo.co.nz/**mailman/listinfo/koha<http://lists.katipo.co.nz/ mailman/listinfo/koha>
--- Maritime heritage and history, preservation and conservation, research and education through the written word and the arts. <http://NavalMarineArchive.com**> and <http://UltraMarine.ca>
______________________________**_________________ Koha mailing list http://koha-community.org Koha@lists.katipo.co.nz
http://lists.katipo.co.nz/**mailman/listinfo/koha<http://lists.katipo.co.nz/ mailman/listinfo/koha>
------------------------------ Message: 7 Date: Sat, 1 Sep 2012 12:46:05 -0400 From: Jared Camins-Esakov <jcamins@cpbibliography.com> To: Doug Kingston <dpk@randomnotes.org> Cc: Koha@lists.katipo.co.nz Subject: Re: [Koha] Zebra not updating biblios automatically in koha 3.8 Message-ID: <CALVDfQyH-J4TptzZDQncGemSvSnC9ETEP_Nj0X64yATmYe0Ymg@mail.gmail.com> Content-Type: text/plain; charset=UTF-8 Doug, So environment variables are not the issue. We are carefully managing
those.
I have tried using the new tool checkNonIndexedBiblios.pl (from patch
Make sure when you are using cron jobs that you set the environment variables IN YOUR CRONTAB. Setting environment variables elsewhere is a recipe for confusion and misery down the road. However, this is -- as you say -- not the problem. 6566)
and it indeed finds a few recent biblios that are not indexed. Using the -z option to mark them for indexing followed by a manual run of rebuild_zebra -b -v -z did not get the biblios indexed. I cranked up the debugging on zebraidx (by modifying rebuild_zebra.pl and using -v -v) and did not see any obvious errors in the output that would suggest why indexing was failing.
Did you change your bibliographic frameworks? It could be a matter of the biblionumber not being stored properly. The other thing to do is to confirm that the non-indexed biblios are *actually* getting added to the zebraqueue by the 6566 script. It's kind of a long shot, but it could be an issue with the zebraqueue table getting corrupted. I've seen this happen when the zebraqueue table got too large, and disk space was low. Regards, Jared -- Jared Camins-Esakov Bibliographer, C & P Bibliography Services, LLC (phone) +1 (917) 727-3445 (e-mail) jcamins@cpbibliography.com (web) http://www.cpbibliography.com/ ------------------------------ _______________________________________________ Koha mailing list Koha@lists.katipo.co.nz http://lists.katipo.co.nz/mailman/listinfo/koha End of Koha Digest, Vol 83, Issue 3 ***********************************