Dear sir , I installed this proses but there is some problem 1).. (To redirect output in individual file add following to /etc/syslog.conf) there is no syslog.conf file .. using this command -- perl C4/SIP/SIPServer.pm C4/SIP/SIPconfig.xml then given Error .. Can't locate Sip/Constants.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.10.1 /usr/local/share/perl/5.10.1 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.10 /usr/share/perl/5.10 /usr/local/lib/site_perl .) at C4/SIP/SIPServer.pm line 14. BEGIN failed--compilation aborted at C4/SIP/SIPServer.pm line 14. My File is -- (1) SIPconfig.xml --(etc/koha/SIPconfig.xml) (2) /usr/share/koha/lib/C4 but they some Error please give me help . On Wed, Jul 4, 2012 at 6:46 PM, <koha-request@lists.katipo.co.nz> wrote:
Send Koha mailing list submissions to koha@lists.katipo.co.nz
To subscribe or unsubscribe via the World Wide Web, visit http://lists.katipo.co.nz/mailman/listinfo/koha or, via email, send a message with subject or body 'help' to koha-request@lists.katipo.co.nz
You can reach the person managing the list at koha-owner@lists.katipo.co.nz
When replying, please edit your Subject line so it is more specific than "Re: Contents of Koha digest..."
Today's Topics:
1. Re: languages lost after upgrading from 3.0 to 3.6 (David Nind) 2. Re: Recommended Server Specs (Tom Obrien) 3. Re: languages lost after upgrading from 3.0 to 3.6 (Gerard Henry) 4. Re: languages lost after upgrading from 3.0 to 3.6 (Robin Sheat) 5. Re: languages lost after upgrading from 3.0 to 3.6 (Chris Cormack) 6. Re: languages lost after upgrading from 3.0 to 3.6 (Gerard Henry) 7. Re: languages lost after upgrading from 3.0 to 3.6 (David Nind) 8. assigning books to patrons (umer.habib@techlogix.com) 9. Re: languages lost after upgrading from 3.0 to 3.6 (Gerard Henry)
----------------------------------------------------------------------
Message: 1 Date: Wed, 4 Jul 2012 19:31:16 +1200 From: David Nind <david.nind@gmail.com> To: Gerard Henry <ghenry@cmi.univ-mrs.fr> Cc: Koha List <koha@lists.katipo.co.nz> Subject: Re: [Koha] languages lost after upgrading from 3.0 to 3.6 Message-ID: < CAK5OMPdbKjOd+08RhUN0UxFO3n_Jy6LZ2Hy675pgKa5w9svzzg@mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1
Hi Gerard.
I haven't had to work with multiple languages (either a fresh install or after an upgrade).
However, this wiki page may help:
http://wiki.koha-community.org/wiki/Installation_of_additional_languages_for...
And this manual page: http://manual.koha-community.org/3.6/en/administration.html#l18nprefs
David Nind | david.nind@gmail.com PO Box 12367, Thorndon, Wellington, New Zealand 6144 h. +64 4 9720 600 | m. +64 21 0537 847 | w. +64 4 8906 098
On 4 July 2012 05:39, Gerard Henry <ghenry@cmi.univ-mrs.fr> wrote:
hello all, i'm doing the upgrade. In 3.0, we have the languages: en fr-FR de-DE ed-ES in opaclanguagesdisplay
but after the upgrade, opaclanguages display is empty, it is not possible to select languages. The dirs are presents: # ls -l /usr/local/koha/opac/htdocs/**opac-tmpl/prog total 28 drwxr-x--x 7 koha koha 4096 2009-11-26 18:40 de-DE drwxr-x--x 8 koha koha 4096 2009-11-26 18:40 en drwxr-x--x 8 koha koha 4096 2009-11-26 18:40 es-ES drwxr-x--x 4 koha koha 4096 2012-06-27 10:39 famfamfam drwxr-x--x 8 koha koha 4096 2009-11-26 18:40 fr-FR drwxr-x--x 2 koha koha 4096 2012-06-27 10:39 images drwxr-x--x 9 koha koha 4096 2012-06-27 10:34 itemtypeimg
what am i missing? anybody can help?
thanks in advance
gerard ______________________________**_________________ Koha mailing list http://koha-community.org Koha@lists.katipo.co.nz http://lists.katipo.co.nz/**mailman/listinfo/koha<; http://lists.katipo.co.nz/mailman/listinfo/koha>
------------------------------
Message: 2 Date: Wed, 4 Jul 2012 11:24:03 +0300 From: Tom Obrien <tobrienu@gmail.com> To: koha@lists.katipo.co.nz Subject: Re: [Koha] Recommended Server Specs Message-ID: < CAE+4i9_8vf4_gBJR6td+rB-L+M-bDCdbZqieyzOjtyYuuN9jZA@mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1
Hi, My institution is planning to invest on a server to deploy Koha and other library related systems (Dspace, Vufind). The proposal is for all the systems to run on the same server.
can some Kindly advice on the specs(including capabilities) i should look for. Thanks in advance, Tom, St. Judes College
------------------------------
Message: 3 Date: Wed, 04 Jul 2012 11:59:19 +0200 From: Gerard Henry <ghenry@cmi.univ-mrs.fr> Cc: Koha List <koha@lists.katipo.co.nz> Subject: Re: [Koha] languages lost after upgrading from 3.0 to 3.6 Message-ID: <4FF413F7.8010706@cmi.univ-mrs.fr> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
thanks for your reply
but, as i tried to explain, i'm upgrading from 3.0 where the languages are already installed. The corresponding files are here. Except that the upgraded 3.6 now doesn't see them
On 07/04/12 09:31 AM, David Nind wrote:
Hi Gerard.
I haven't had to work with multiple languages (either a fresh install or after an upgrade).
However, this wiki page may help:
http://wiki.koha-community.org/wiki/Installation_of_additional_languages_for...
And this manual page: http://manual.koha-community.org/3.6/en/administration.html#l18nprefs
David Nind | david.nind@gmail.com <mailto:david.nind@gmail.com> PO Box 12367, Thorndon, Wellington, New Zealand 6144 h. +64 4 9720 600 | m. +64 21 0537 847 | w. +64 4 8906 098
On 4 July 2012 05:39, Gerard Henry <ghenry@cmi.univ-mrs.fr <mailto:ghenry@cmi.univ-mrs.fr>> wrote:
hello all, i'm doing the upgrade. In 3.0, we have the languages: en fr-FR de-DE ed-ES in opaclanguagesdisplay
but after the upgrade, opaclanguages display is empty, it is not possible to select languages. The dirs are presents: # ls -l /usr/local/koha/opac/htdocs/__opac-tmpl/prog total 28 drwxr-x--x 7 koha koha 4096 2009-11-26 18:40 de-DE drwxr-x--x 8 koha koha 4096 2009-11-26 18:40 en drwxr-x--x 8 koha koha 4096 2009-11-26 18:40 es-ES drwxr-x--x 4 koha koha 4096 2012-06-27 10:39 famfamfam drwxr-x--x 8 koha koha 4096 2009-11-26 18:40 fr-FR drwxr-x--x 2 koha koha 4096 2012-06-27 10:39 images drwxr-x--x 9 koha koha 4096 2012-06-27 10:34 itemtypeimg
what am i missing? anybody can help?
thanks in advance
gerard _________________________________________________ Koha mailing list http://koha-community.org Koha@lists.katipo.co.nz <mailto:Koha@lists.katipo.co.nz> http://lists.katipo.co.nz/__mailman/listinfo/koha <http://lists.katipo.co.nz/mailman/listinfo/koha>
------------------------------
Message: 4 Date: Wed, 04 Jul 2012 11:01:39 +0100 From: Robin Sheat <robin@catalyst.net.nz> To: koha@lists.katipo.co.nz Subject: Re: [Koha] languages lost after upgrading from 3.0 to 3.6 Message-ID: <4FF41483.5060802@catalyst.net.nz> Content-Type: text/plain; charset=UTF-8
Op 04-07-12 10:59, Gerard Henry schreef:
but, as i tried to explain, i'm upgrading from 3.0 where the languages are already installed. The corresponding files are here. Except that the upgraded 3.6 now doesn't see them
When you upgrade, translations and methods of deploying the translations change. Did you try regenerating them as explained in the links David posted?
-- Robin Sheat Catalyst IT Ltd. ? +64 4 803 2204 GPG: 5957 6D23 8B16 EFAB FEF8 7175 14D3 6485 A99C EB6D
------------------------------
Message: 5 Date: Wed, 4 Jul 2012 22:09:36 +1200 From: Chris Cormack <chris@bigballofwax.co.nz> To: Gerard Henry <ghenry@cmi.univ-mrs.fr> Cc: Koha List <koha@lists.katipo.co.nz> Subject: Re: [Koha] languages lost after upgrading from 3.0 to 3.6 Message-ID: <CA+95qVSSh68-orEFidV= Ppe1yaPTu6toOZr1EQUxUZk9mM5xhg@mail.gmail.com> Content-Type: text/plain; charset=UTF-8
On 4 July 2012 21:59, Gerard Henry <ghenry@cmi.univ-mrs.fr> wrote:
thanks for your reply
but, as i tried to explain, i'm upgrading from 3.0 where the languages are already installed. The corresponding files are here. Except that the upgraded 3.6 now doesn't see them
Yes, but they are for 3.0.
1/ 3.6.x uses Template::Toolkit not HTML::Template::Pro, so even if it found them, they wouldn't 2/ There have been literally hundreds (thousands) of changes to the templates in the years since 3.0. Those generated templates will not work anymore, even if they were the right syntax
So David is right, you need to regenerate your templates, and you should do this after every upgrade
Chris
------------------------------
Message: 6 Date: Wed, 04 Jul 2012 14:09:02 +0200 From: Gerard Henry <ghenry@cmi.univ-mrs.fr> To: Chris Cormack <chris@bigballofwax.co.nz> Cc: Koha List <koha@lists.katipo.co.nz> Subject: Re: [Koha] languages lost after upgrading from 3.0 to 3.6 Message-ID: <4FF4325E.1070104@cmi.univ-mrs.fr> Content-Type: text/plain; charset=UTF-8; format=flowed
On 07/04/12 12:09 PM, Chris Cormack wrote:
On 4 July 2012 21:59, Gerard Henry<ghenry@cmi.univ-mrs.fr> wrote:
thanks for your reply
but, as i tried to explain, i'm upgrading from 3.0 where the languages are already installed. The corresponding files are here. Except that the upgraded 3.6 now doesn't see them
Yes, but they are for 3.0.
1/ 3.6.x uses Template::Toolkit not HTML::Template::Pro, so even if it found them, they wouldn't 2/ There have been literally hundreds (thousands) of changes to the templates in the years since 3.0. Those generated templates will not work anymore, even if they were the right syntax
So David is right, you need to regenerate your templates, and you should do this after every upgrade
ok, i just did it: env KOHA_CONF=/etc/koha/koha-conf.xml PERL5LIB=/usr/local/koha/lib/ perl translate install fr-FR tmpl_process3.pl: Warning: unconsistent %s count: (0/1): line: 70660 msgid: "Total amount to be written ofsf:" msgstr: "Total des pertes et profits : %s" tmpl_process3.pl: Warning: unconsistent %s count: (3/4): line: 10980 msgid: "%s %%] %s %s " msgstr: "%s %s] %s %s "
but there is nothing yet in opaclanguagesdisplay
is there anything am i missing?
thanks for help,
gerard
------------------------------
Message: 7 Date: Thu, 5 Jul 2012 00:48:25 +1200 From: David Nind <david.nind@gmail.com> To: Gerard Henry <ghenry@cmi.univ-mrs.fr> Cc: Koha List <koha@lists.katipo.co.nz> Subject: Re: [Koha] languages lost after upgrading from 3.0 to 3.6 Message-ID: <CAK5OMPfOhS+c= Fn3RYCYtkBW9rotyUBwTLmRruhJUVuZ0zGTNA@mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1
Hi Gerard.
I'm not sure whether the warning messages mean there was a problem and it didn't work. I didn't get any messages on a 3.8 package install (I don't have 3.6 installed to try it out).
but there is nothing yet in opaclanguagesdisplay
is there anything am i missing?
After installing a new language it has to be activated in the system preference editor:
More > Administration > Global System Preferences > I18N/L10N
opaclanguagesdisplay should be set to allow, for the settings above this for language and opaclanguages there should be a tick box for French next to them.
David Nind | david.nind@gmail.com PO Box 12367, Thorndon, Wellington, New Zealand 6144 h. +64 4 9720 600 | m. +64 21 0537 847 | w. +64 4 8906 098
------------------------------
Message: 8 Date: Wed, 4 Jul 2012 09:09:27 -0400 (EDT) From: umer.habib@techlogix.com To: "koha@lists.katipo.co.nz" <koha@lists.katipo.co.nz> Subject: [Koha] assigning books to patrons Message-ID: <1341407367.08610667@apps.rackspace.com> Content-Type: text/plain;charset=UTF-8
Hi,
I am working on the phase where i have to transfer library data from the old system to KOHA. I have successfully added the library books and items into KOHA using a mrc file that i created using marcedit tool Ok. now i have an excel file in which all the data related to 'which books are issued to which patron + all the due fines of the patrons' is present and i have to imnport it to KOHA. There isnt any tool in KOHA to do this thing directly. does any one has any idea how to accomplish this thing. Or moving that data directly to the database is the only option we have? in that case is there some script already available or anyone has any script that could help me?
thanks a lot
regards umer habib
------------------------------
Message: 9 Date: Wed, 04 Jul 2012 15:16:09 +0200 From: Gerard Henry <ghenry@cmi.univ-mrs.fr> Cc: Koha List <koha@lists.katipo.co.nz> Subject: Re: [Koha] languages lost after upgrading from 3.0 to 3.6 Message-ID: <4FF44219.4090809@cmi.univ-mrs.fr> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
at the beginning of the wiki:
http://wiki.koha-community.org/wiki/Installation_of_additional_languages_for...
there is: Getting the latest translation files "For many languages the stable Koha installation packages come with outdated or disfunctional translation files. Thus it is a good idea to download the latest translation files" but the link http://translate.koha.org/ only displays "it works"
on this page: http://translate.koha-community.org/fr/36/ i don't understand how i can retrieve the files
do i need to download files from 3.8 release, even if i'm using 3.6 ?
------------------------------
_______________________________________________ Koha mailing list Koha@lists.katipo.co.nz http://lists.katipo.co.nz/mailman/listinfo/koha
End of Koha Digest, Vol 81, Issue 9 ***********************************
-- * Regards Software Engineer PANKAJ KUMAR MAURYA* *Mobail No-9953938077 * *Email: pdelnet@gmail.com*