Hai am new in this forum and i tried to install koha in my institute I followed a site code was \\\\' Monday, May 10, 2010 Install Koha 3.00.00 on Ubuntu 9.10 ""' i am using 10.4 now"""" Preparing the system: [Ubuntu 9.10 Desktop Edition] I did all of the commands as (root) sudo. * sudo apt-get install zip unzip * sudo apt-get update Create a new user with the name koha, password koha[up to you] * sudo adduser koha Install LAMP Server and dselect [Both required] * sudo apt-get install lamp-server^ Take note of the mysql root password that you will put * sudo apt-get install dselect Configure the Character Set of Apache2 * sudo nano /etc/apache2/conf.d/charset Add the two lines: AddCharset UTF-8 .utf8 AddDefaultCharset UTF-8 Check your Ubuntu Local * locale It should return something like LANG=en_US.UTF-8 Re-update your system * sudo apt-get update Install and configure Yaz and Zebra [If you decide on using Zebra, recommended for large libraries] * sudo apt-get install yaz idzebra-2.0 idzebra-2.0-doc Create a build directory, you will see why later * sudo mkdir /build * sudo chmod -R 777 /build Installing Koha and required Koha packages * cd /build * sudo wget http://download.koha.org/koha-3.00.00.tar.gz * sudo tar -xzvf koha-3.00.00.tar.gz * cd /build/koha-3.00.00 * sudo dpkg --set-selections < install_misc/debian.packages * sudo dselect The dselect process will take a long time, as it will try and install all of the required koha packages listed under debian.packages Select the following on dselect: Choose [I]nstall and accept packages to be installed (hit return) Choose [C]onfigure, [R]emove and [Q]uit in this order until dselect has completed and exists. Opsi Error: Probably only for my side, but non the less, might be helpful for others. Failed to fetch http://ae.archive.ubuntu.com/ubuntu/pool/main/g/gst-plugins-base0.10/gstream... 503 Service Unavailable Failed to fetch http://ae.archive.ubuntu.com/ubuntu/pool/main/g/gst-plugins-base0.10/gstream... 503 Service Unavailable E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? Some errors occurred while unpacking. I'm going to configure the packages that were installed. This may result in duplicate errors or errors caused by missing dependencies. This is OK, only the errors above this message are important. Please fix them and run [I]nstall again Press enter to continue. * cd /build * sudo wget http://ae.archive.ubuntu.com/ubuntu/pool/main/g/gst-plugins-base0.10/gstream... * sudo dpkg -i gstreamer0.10-alsa_0.10.25-2ubuntu1.2_i386.deb Install the lovely Java: Require for other packages. * sudo apt-get update * sudo apt-get install sun-java6-jdk sun-java6-jre sun-java6-plugin sun-java6-fonts Lets run dselect again, to see if any other errors occur * cd /build/koha-3.00.00 * sudo dpkg --set-selections < install_misc/debian.packages * sudo dselect Select the following on dselect: Choose [I]nstall and accept packages to be installed (hit return) Choose [C]onfigure, [R]emove and [Q]uit in this order until dselect has completed and exists. If all is good, you shall see something like: Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. [All is good] Configure CPAN in Ubuntu: * sudo cpan If you are running cpan for the first time, it will request you to configure it. Simply leave the defaults that cpan suggests. o cpan> o conf commit This will commit the configurations you are have just made> o cpan>quit You have just configured cpan and commited the changes, and existed. -- Important: To ensure that all your CPAN configurations have been written and saved. sudo nano /etc/perl/CPAN/Config.pm Add Zip/Unzip configuration to CPAN. * sudo cpan o cpan> o conf unzip /usr/bin/unzip o cpan> o conf commit o cpan> quit /usr/bin/unzip is where my unzip is located in Ubuntu Install and Configure Perl Libraries for Koha – Part 1 * sudo cpan MARC::Crosswalk::DublinCore GD \ GD::Barcode::UPCE HTML::Scrubber\ Algorithm::CheckDigits::M43_001Biblio::EndnoteStyle\ Email::Date YAML PDF::Reuse PDF::Reuse::Barcode \ Locale::Currency::Format As cpan is installing, it will ask you to pre-append other libraries/packages, simply say yes. Please note, that this process will be long and you need to be monitoring it, as it will keep on asking to press yes. Configuring MySQL for Koha * mysqladmin -u root -p create koha Enter Password: your mysql root password koha is the name of my db in this case. * mysql -uroot –p Enter Password: your mysql root password Grant Permissions for MySQL Database: Now because this is a tutorial, I used simple passwords. Of course on your production system, it is advised that you use difficult passwords. Kindly don’t criticize :) koha is the database name. * mysql> grant all on koha.* to 'root'@'localhost' identified by 'rootpassword’; Query OK, 0 rows affected (0.00 sec) * mysql> grant all on koha.* to 'koha'@'localhost' identified by 'koha'; Query OK, 0 rows affected (0.00 sec) * mysql> flush privileges; Query OK, 0 rows affected (0.00 sec) * mysql> quit; Bye Install and Configure Perl Libraries for Koha – Part 2 * sudo cpan o cpan> force install HTTP:OAI IPC::Cmd JSON XML::Writer XML::SAX::Writer o cpan> quit Configuring the SAX Parser * cd /build/koha-3.00.00 * sudo perl misc/sax_parser_print.pl This will print us the current SAX parser settings XML::SAX::Expat=HASH(0x9f7afe0) <--We don't want this so we have to fix it. * sudo nano /etc/perl/XML/SAX/ParserDetails.ini Copy these two lines to the end of the ParserDetails.ini file [XML::LibXML::SAX::Parser] http://xml.org/sax/features/namespaces = 1 * sudo perl misc/sax_parser_print.pl If it worked, then it should print out something like XML::LibXML::SAX::Parser=HASH(0x8c10040) Install pre-requisite libraries for the Perl packages: * cd /build * sudo wget http://www.libgd.org/releases/gd-2.0.35.tar.gz o tar -xzvf tar -xzvf gd-2.0.35.tar.gz o cd gd-2.0.35 o sudo ./configure o sudo make o sudo make install * sudo apt-get install libyaz-dev Install and Configure Perl Libraries for Koha – Part 3 * sudo cpan o cpan> force install DBD::mysql The force option is so to skip the Test suite which would require us to create a new database just for testing. I don’t want to be bothered with that. So force it. + cpan> install Algorithm::CheckDigits + cpan> install Biblio::EndnoteStyle + cpan> install Data::ICal + cpan> install GD + cpan> install HTML::Template::Pro + cpan> install MARC::Charset + cpan> install MARC::File::XML + cpan> install Net::Z3950::ZOOM + cpan> install SMS::Send + cpan> install Schedule::At + cpan> install XML::RSS + cpan> install CGI::Session::Serialize::yaml -- Important: If during running the web installer, you get the error [Production mode, trapped fatal error”. Then most likely you forgot to install CGI::Session::Serialize::yaml + cpan> quit Install Koha – Finally – Part 1 * su * cd /build/koha-3.00.00 * sudo perl Makefile.PL This is the printout of the installation: For reference only! AUTH_INDEX_MODE dom DB_HOST localhost DB_NAME koha DB_PASS koha DB_PORT 3306 DB_TYPE mysql DB_USER koha INSTALL_BASE /usr/share/koha INSTALL_MODE standard INSTALL_PAZPAR2 no INSTALL_SRU yes INSTALL_ZEBRA yes KOHA_GROUP koha KOHA_INSTALLED_VERSION 3.00.00.107 KOHA_USER koha PATH_TO_ZEBRA /usr/bin RUN_DATABASE_TESTS yes TEST_DB_HOST localhost TEST_DB_NAME kohatest TEST_DB_PASS koha TEST_DB_TYPE mysql TEST_DB_USER koha ZEBRA_LANGUAGE en ZEBRA_MARC_FORMAT marc21 ZEBRA_PASS zebrastripes ZEBRA_SRU_AUTHORITIES_POR9999 ZEBRA_SRU_BIBLIOS_PORT 9998 ZEBRA_SRU_HOST localhost ZEBRA_USER kohauser and in the following directories: DOC_DIR /usr/share/koha/doc INTRANET_CGI_DIR /usr/share/koha/intranet/cgi-bin INTRANET_TMPL_DIR /usr/share/koha/intranet/htdocs/intranet-tmpl INTRANET_WWW_DIR /usr/share/koha/intranet/htdocs KOHA_CONF_DIR /etc/koha LOG_DIR /var/log/koha MAN_DIR /usr/share/koha/man MISC_DIR /usr/share/koha/misc OPAC_CGI_DIR /usr/share/koha/opac/cgi-bin OPAC_TMPL_DIR /usr/share/koha/opac/htdocs/opac-tmpl OPAC_WWW_DIR /usr/share/koha/opac/htdocs PAZPAR2_CONF_DIR /etc/koha/pazpar2 PERL_MODULE_DIR /usr/share/koha/lib SCRIPT_DIR /usr/share/koha/bin SCRIPT_NONDEV_DIR /usr/share/koha/bin ZEBRA_CONF_DIR /etc/koha/zebradb ZEBRA_DATA_DIR /var/lib/koha/zebradb ZEBRA_LOCK_DIR /var/lock/koha/zebradb ZEBRA_RUN_DIR /var/run/koha/zebradb To change any configuration setting, please run perl Makefile.PL again. To override one of the target directories, you can do so on the command line like this: perl Makefile.PL PERL_MODULE_DIR=/usr/share/perl/5.8 You can also set different default values for parameters or override directory locations by using environment variables. For example: export DB_USER=my_koha perl Makefile.PL or DB_USER=my_koha DOC_DIR=/usr/local/info perl Makefile.PL If installing on a Win32 platform, be sure to use: 'dmake -x MAXLINELENGTH=300000' Writing Makefile for koha -- Important: If you made a mistake, and want to change any configuration setting, please run the command again: sudo perl Makefile.PL Install Koha – Finally – Part 2 * su * cd /build/koha-3.00.00 * sudo make * sudo make test All tests successful. Files=19, Tests=47, 2 wallclock secs ( 0.04 usr 0.14 sys + 1.24 cusr 1.03 csys = 2.45 CPU) Result: PASS * sudo make install It will take time to install. At the end it will look similar to this at the end. I didn’t copy the whole print-out. …etc….etc..etc…. Installing /usr/share/koha/man/man3/cataloguing::value_builder::unimarc_field_115a.3pm Installing /usr/share/koha/man/man3/C4::Reports.3pm Installing /usr/share/koha/man/man3/cataloguing::value_builder::unimarc_field_123i.3pm Installing /usr/share/koha/man/man3/acqui::neworderbiblio.3pm Koha's files have now been installed. In order to use Koha's command-line batch jobs, you should set the following environment variables: export KOHA_CONF=/etc/koha/koha-conf.xml export PERL5LIB=/usr/share/koha/lib For other post-installation tasks, please consult the README. Setting up Environmental Variables * su * export KOHA_CONF=/etc/koha/koha-conf.xml * export PERL5LIB=/usr/share/koha/lib Add Koha site to Apache and configure Apache2 * sudo ln -s /etc/koha/koha-httpd.conf /etc/apache2/sites-available/koha [The location of apache2/sites-available might be different on your machine. To find where apache2 is located, do the command: find / -name apache2 * sudo nano /etc/apache2/ports.conf o Comment out the NameVirtualHost *:80 Put # in front of the line to comment it o Add Listen port 8080 and port 80 The file will look like this: #NameVirtualHost *:80 Listen 80 Listen 8080 <IfModule mod_ssl.c> # SSL name based virtual hosts are not yet supported, therefore no # NameVirtualHost statement here Listen 443 </IfModule> Configure Apache and Restart * sudo a2enmod rewrite Enabling module rewrite. Run '/etc/init.d/apache2 restart' to activate new configuration! * sudo a2ensite koha Enabling site koha. Run '/etc/init.d/apache2 reload' to activate new configuration! * sudo apache2ctl restart Setting up and Configuring Zebra Server * sudo ln -s /usr/share/koha/bin/koha-zebra-ctl.sh /etc/init.d/koha-zebra-daemon * sudo update-rc.d koha-zebra-daemon defaults update-rc.d: warning: /etc/init.d/koha-zebra-daemon missing LSB information update-rc.d: see <http://wiki.debian.org/LSBInitScripts> Adding system startup for /etc/init.d/koha-zebra-daemon ... /etc/rc0.d/K20koha-zebra-daemon -> ../init.d/koha-zebra-daemon /etc/rc1.d/K20koha-zebra-daemon -> ../init.d/koha-zebra-daemon /etc/rc6.d/K20koha-zebra-daemon -> ../init.d/koha-zebra-daemon /etc/rc2.d/S20koha-zebra-daemon -> ../init.d/koha-zebra-daemon /etc/rc3.d/S20koha-zebra-daemon -> ../init.d/koha-zebra-daemon /etc/rc4.d/S20koha-zebra-daemon -> ../init.d/koha-zebra-daemon /etc/rc5.d/S20koha-zebra-daemon -> ../init.d/koha-zebra-daemon -- Important: /usr/share is the location of where I installed Koha during the previous steps. It is the default for Production Systems. [Recommended] Setting up and configuring Zebraqueue * sudo ln -s /usr/share/koha/bin/koha-zebraqueue-ctl.sh /etc/init.d/koha-zebraqueue-daemon * sudo update-rc.d koha-zebraqueue-daemon defaults update-rc.d: warning: /etc/init.d/koha-zebraqueue-daemon missing LSB information update-rc.d: see <http://wiki.debian.org/LSBInitScripts> Adding system startup for /etc/init.d/koha-zebraqueue-daemon ... /etc/rc0.d/K20koha-zebraqueue-daemon -> ../init.d/koha-zebraqueue-daemon /etc/rc1.d/K20koha-zebraqueue-daemon -> ../init.d/koha-zebraqueue-daemon /etc/rc6.d/K20koha-zebraqueue-daemon -> ../init.d/koha-zebraqueue-daemon /etc/rc2.d/S20koha-zebraqueue-daemon -> ../init.d/koha-zebraqueue-daemon /etc/rc3.d/S20koha-zebraqueue-daemon -> ../init.d/koha-zebraqueue-daemon /etc/rc4.d/S20koha-zebraqueue-daemon -> ../init.d/koha-zebraqueue-daemon /etc/rc5.d/S20koha-zebraqueue-daemon -> ../init.d/koha-zebraqueue-daemon Reboot your computer * sudo reboot I am rebooting for the zebra server and zebraqueue daemon to start up. Maybe there is a better way. I don’t know :) Running Koha Web Installer [Defaults] * http://127.0.1.1:8080 The web installer, and Koha Administrator View * http://127.0.1.1:80 The public OPAC View * Username: koha Password: koha If you don't know your username/password. Check koha-conf.xml. sudo nano /etc/koha/koha-conf.xml Look at the section under <config> <config> <db_scheme>mysql</db_scheme> <database>koha</database> <hostname>localhost</hostname> <port>3306</port> <user>koha</user> <pass>koha</pass> ...etc.... ...etc.... </config> During Web Installation, Select "MARC21", unless otherwise specified by your Library. As well, Choose "ZEBRA" indexing. You have to configure this. I have chosen Zebra because my system is a production system, and our Library has a a big catalog. You may choose "NoZebra", if you are doing dev-testing OR your catalog is small. Adding one Catalog and running Zebra: [Must be KOHA user] o Add a new record to Koha by searching Library of Congress o su koha o perl -I /usr/share/koha/lib /usr/share/koha/bin/migration_tools/rebuild_zebra.pl -a -b –r Option a: Authority Indexing Option b: Biblios Indexing Option r: Reseting the indexing from start Searching Koha for a record: If you did rebuild_zebra.pl and searched Koha for the record you added and you get 0 results. You need to look at a few things. - Making sure that your zebra server and zebraqueue daemon are running: - Replace ${KOHA_USER} with your koha user. In my case koha o sudo -u ${KOHA_USER} zebrasrv -f /etc/koha/koha-conf.xml o sudo -u ${KOHA_USER} ${SCRIPT_DIR}/zebraqueue_daemon.pl - Ensure that ownership is set to koha. Zebradb must belong to your koha user o sudo chmod –R 777 /var/lock/koha o sudo chown –R koha:koha /var/lock/koha o sudo chmod –R 777 /var/lib/koha/ o sudo chown –R koha:koha /var/lib/koha If you desperately need to reset your authority and biblios database: * su koha * zebraidx -c /etc/koha/zebradb/zebra-authorities-dom.cfg -g iso2709 –d authorities init * zebraidx -c /etc/koha/zebradb/zebra-biblios.cfg -g iso2709 -d biblios init /////////////// using the command this is the result library@library-desktop:/build/koha-3.00.00$ sudo apt-get install sun-java6-jdk sun-java6-jre sun-java6-plugin sun-java6-fonts Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: linux-headers-2.6.32-21 linux-headers-2.6.32-21-generic Use 'apt-get autoremove' to remove them. The following extra packages will be installed: gsfonts-x11 javahelp2 junit4 libhamcrest-java libjna-java libnb-platform11-java libswing-layout-java odbcinst odbcinst1debian1 sun-java6-bin unixodbc visualvm Suggested packages: javahelp2-doc libjna-java-doc libnb-platform11-java-doc libswing-layout-java-doc sun-java6-demo openjdk-6-doc sun-java6-source ttf-kochi-gothic ttf-sazanami-gothic ttf-kochi-mincho ttf-sazanami-mincho ttf-arphic-uming libmyodbc odbc-postgresql tdsodbc unixodbc-bin The following NEW packages will be installed: gsfonts-x11 javahelp2 junit4 libhamcrest-java libjna-java libnb-platform11-java libswing-layout-java odbcinst odbcinst1debian1 sun-java6-bin sun-java6-fonts sun-java6-jdk sun-java6-jre sun-java6-plugin unixodbc visualvm 0 upgraded, 16 newly installed, 0 to remove and 0 not upgraded. Need to get 69.7MB of archives. After this operation, 202MB of additional disk space will be used. Do you want to continue [Y/n]? y Get:1 http://in.archive.ubuntu.com/ubuntu/ lucid/main odbcinst 2.2.11-21 [34.8kB] Get:2 http://archive.canonical.com/ubuntu/ lucid/partner sun-java6-jre 6.22-0ubuntu1~10.04 [6,420kB] Get:3 http://in.archive.ubuntu.com/ubuntu/ lucid/main odbcinst 2.2.11-21 [34.8kB] Get:4 http://in.archive.ubuntu.com/ubuntu/ lucid/main odbcinst1debian1 2.2.11-21 [62.3kB] Get:5 http://in.archive.ubuntu.com/ubuntu/ lucid/main unixodbc 2.2.11-21 [201kB] Get:6 http://in.archive.ubuntu.com/ubuntu/ lucid/main gsfonts-x11 0.21 [10.5kB] Get:7 http://in.archive.ubuntu.com/ubuntu/ lucid/universe javahelp2 2.0.05.ds1-3 [2,147kB] Get:8 http://in.archive.ubuntu.com/ubuntu/ lucid/main libhamcrest-java 1.1-4 [84.0kB] Get:9 http://in.archive.ubuntu.com/ubuntu/ lucid/main junit4 4.8.1-3 [202kB] Get:10 http://in.archive.ubuntu.com/ubuntu/ lucid/universe libjna-java 3.2.3-1 [149kB] Get:11 http://in.archive.ubuntu.com/ubuntu/ lucid/universe libswing-layout-java 1.0.3-2 [50.1kB] Get:12 http://in.archive.ubuntu.com/ubuntu/ lucid/universe libnb-platform11-java 6.8-0ubuntu2 [7,848kB] Get:13 http://archive.canonical.com/ubuntu/ lucid/partner sun-java6-bin 6.22-0ubuntu1~10.04 [29.7MB] Get:14 http://in.archive.ubuntu.com/ubuntu/ lucid-updates/universe visualvm 1.2.2-0ubuntu2 [3,068kB] Get:15 http://archive.canonical.com/ubuntu/ lucid/partner sun-java6-jdk 6.22-0ubuntu1~10.04 [19.7MB] Get:16 http://archive.canonical.com/ubuntu/ lucid/partner sun-java6-fonts 6.22-0ubuntu1~10.04 [1,884B] Get:17 http://archive.canonical.com/ubuntu/ lucid/partner sun-java6-plugin 6.22-0ubuntu1~10.04 [1,864B] Fetched 69.7MB in 7min 5s (164kB/s) Preconfiguring packages ... Selecting previously deselected package sun-java6-jre. (Reading database ... 155684 files and directories currently installed.) Unpacking sun-java6-jre (from .../sun-java6-jre_6.22-0ubuntu1~10.04_all.deb) ... Selecting previously deselected package odbcinst. Unpacking odbcinst (from .../odbcinst_2.2.11-21_i386.deb) ... Selecting previously deselected package odbcinst1debian1. Unpacking odbcinst1debian1 (from .../odbcinst1debian1_2.2.11-21_i386.deb) ... Selecting previously deselected package unixodbc. Unpacking unixodbc (from .../unixodbc_2.2.11-21_i386.deb) ... Selecting previously deselected package sun-java6-bin. Unpacking sun-java6-bin (from .../sun-java6-bin_6.22-0ubuntu1~10.04_i386.deb) ... sun-dlj-v1-1 license has already been accepted Selecting previously deselected package sun-java6-jdk. Unpacking sun-java6-jdk (from .../sun-java6-jdk_6.22-0ubuntu1~10.04_i386.deb) ... sun-dlj-v1-1 license has already been accepted Selecting previously deselected package gsfonts-x11. Unpacking gsfonts-x11 (from .../gsfonts-x11_0.21_all.deb) ... Selecting previously deselected package javahelp2. Unpacking javahelp2 (from .../javahelp2_2.0.05.ds1-3_all.deb) ... Selecting previously deselected package libhamcrest-java. Unpacking libhamcrest-java (from .../libhamcrest-java_1.1-4_all.deb) ... Selecting previously deselected package junit4. Unpacking junit4 (from .../junit4_4.8.1-3_all.deb) ... Selecting previously deselected package libjna-java. Unpacking libjna-java (from .../libjna-java_3.2.3-1_i386.deb) ... Selecting previously deselected package libswing-layout-java. Unpacking libswing-layout-java (from .../libswing-layout-java_1.0.3-2_all.deb) ... Selecting previously deselected package libnb-platform11-java. Unpacking libnb-platform11-java (from .../libnb-platform11-java_6.8-0ubuntu2_all.deb) ... Selecting previously deselected package sun-java6-fonts. Unpacking sun-java6-fonts (from .../sun-java6-fonts_6.22-0ubuntu1~10.04_all.deb) ... Selecting previously deselected package sun-java6-plugin. Unpacking sun-java6-plugin (from .../sun-java6-plugin_6.22-0ubuntu1~10.04_i386.deb) ... Selecting previously deselected package visualvm. Unpacking visualvm (from .../visualvm_1.2.2-0ubuntu2_i386.deb) ... Processing triggers for shared-mime-info ... Processing triggers for man-db ... Processing triggers for desktop-file-utils ... Processing triggers for python-gmenu ... Rebuilding /usr/share/applications/desktop.en_IN.cache... Processing triggers for doc-base ... Processing 1 added doc-base file(s)... Registering documents with scrollkeeper... Processing triggers for fontconfig ... Processing triggers for hicolor-icon-theme ... Processing triggers for python-support ... Setting up gsfonts-x11 (0.21) ... Setting up javahelp2 (2.0.05.ds1-3) ... Setting up libhamcrest-java (1.1-4) ... Setting up junit4 (4.8.1-3) ... Setting up libjna-java (3.2.3-1) ... Setting up libswing-layout-java (1.0.3-2) ... Setting up libnb-platform11-java (6.8-0ubuntu2) ... Setting up odbcinst (2.2.11-21) ... Setting up odbcinst1debian1 (2.2.11-21) ... Setting up unixodbc (2.2.11-21) ... Setting up sun-java6-bin (6.22-0ubuntu1~10.04) ... update-alternatives: using /usr/lib/jvm/java-6-sun/jre/bin/ControlPanel to provide /usr/bin/ControlPanel (ControlPanel) in auto mode. update-alternatives: using /usr/lib/jvm/java-6-sun/jre/bin/java_vm to provide /usr/bin/java_vm (java_vm) in auto mode. update-alternatives: using /usr/lib/jvm/java-6-sun/jre/bin/jcontrol to provide /usr/bin/jcontrol (jcontrol) in auto mode. Setting up sun-java6-jre (6.22-0ubuntu1~10.04) ... Setting up sun-java6-jdk (6.22-0ubuntu1~10.04) ... update-alternatives: using /usr/lib/jvm/java-6-sun/bin/HtmlConverter to provide /usr/bin/HtmlConverter (HtmlConverter) in auto mode. update-alternatives: using /usr/lib/jvm/java-6-sun/bin/appletviewer to provide /usr/bin/appletviewer (appletviewer) in auto mode. update-alternatives: using /usr/lib/jvm/java-6-sun/bin/apt to provide /usr/bin/apt (apt) in auto mode. update-alternatives: using /usr/lib/jvm/java-6-sun/bin/extcheck to provide /usr/bin/extcheck (extcheck) in auto mode. update-alternatives: using /usr/lib/jvm/java-6-sun/bin/idlj to provide /usr/bin/idlj (idlj) in auto mode. update-alternatives: using /usr/lib/jvm/java-6-sun/bin/jar to provide /usr/bin/jar (jar) in auto mode. update-alternatives: using /usr/lib/jvm/java-6-sun/bin/jarsigner to provide /usr/bin/jarsigner (jarsigner) in auto mode. update-alternatives: using /usr/lib/jvm/java-6-sun/bin/java-rmi.cgi to provide /usr/bin/java-rmi.cgi (java-rmi.cgi) in auto mode. update-alternatives: using /usr/lib/jvm/java-6-sun/bin/javac to provide /usr/bin/javac (javac) in auto mode. update-alternatives: using /usr/lib/jvm/java-6-sun/bin/javadoc to provide /usr/bin/javadoc (javadoc) in auto mode. update-alternatives: using /usr/lib/jvm/java-6-sun/bin/javah to provide /usr/bin/javah (javah) in auto mode. update-alternatives: using /usr/lib/jvm/java-6-sun/bin/javap to provide /usr/bin/javap (javap) in auto mode. update-alternatives: using /usr/lib/jvm/java-6-sun/bin/jconsole to provide /usr/bin/jconsole (jconsole) in auto mode. update-alternatives: using /usr/lib/jvm/java-6-sun/bin/jdb to provide /usr/bin/jdb (jdb) in auto mode. update-alternatives: using /usr/lib/jvm/java-6-sun/bin/jhat to provide /usr/bin/jhat (jhat) in auto mode. update-alternatives: using /usr/lib/jvm/java-6-sun/bin/jinfo to provide /usr/bin/jinfo (jinfo) in auto mode. update-alternatives: using /usr/lib/jvm/java-6-sun/bin/jmap to provide /usr/bin/jmap (jmap) in auto mode. update-alternatives: using /usr/lib/jvm/java-6-sun/bin/jps to provide /usr/bin/jps (jps) in auto mode. update-alternatives: using /usr/lib/jvm/java-6-sun/bin/jrunscript to provide /usr/bin/jrunscript (jrunscript) in auto mode. update-alternatives: using /usr/lib/jvm/java-6-sun/bin/jsadebugd to provide /usr/bin/jsadebugd (jsadebugd) in auto mode. update-alternatives: using /usr/lib/jvm/java-6-sun/bin/jstack to provide /usr/bin/jstack (jstack) in auto mode. update-alternatives: using /usr/lib/jvm/java-6-sun/bin/jstat to provide /usr/bin/jstat (jstat) in auto mode. update-alternatives: using /usr/lib/jvm/java-6-sun/bin/jstatd to provide /usr/bin/jstatd (jstatd) in auto mode. update-alternatives: using /usr/lib/jvm/java-6-sun/bin/native2ascii to provide /usr/bin/native2ascii (native2ascii) in auto mode. update-alternatives: using /usr/lib/jvm/java-6-sun/bin/rmic to provide /usr/bin/rmic (rmic) in auto mode. update-alternatives: using /usr/lib/jvm/java-6-sun/bin/schemagen to provide /usr/bin/schemagen (schemagen) in auto mode. update-alternatives: using /usr/lib/jvm/java-6-sun/bin/serialver to provide /usr/bin/serialver (serialver) in auto mode. update-alternatives: using /usr/lib/jvm/java-6-sun/bin/wsgen to provide /usr/bin/wsgen (wsgen) in auto mode. update-alternatives: using /usr/lib/jvm/java-6-sun/bin/wsimport to provide /usr/bin/wsimport (wsimport) in auto mode. update-alternatives: using /usr/lib/jvm/java-6-sun/bin/xjc to provide /usr/bin/xjc (xjc) in auto mode. Setting up sun-java6-fonts (6.22-0ubuntu1~10.04) ... No CIDSupplement specified for Batang-Bold, defaulting to 0. No CIDSupplement specified for Batang-Regular, defaulting to 0. No CIDSupplement specified for Dotum-Regular, defaulting to 0. No CIDSupplement specified for Dotum-Bold, defaulting to 0. Updating fontconfig cache for /usr/share/fonts/truetype/ttf-lucida Setting up sun-java6-plugin (6.22-0ubuntu1~10.04) ... Setting up visualvm (1.2.2-0ubuntu2) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place library@library-desktop:/build/koha-3.00.00$ /////////// ------------------------------------------------------------------------------------------------------------------ use this command i got message sudo cpan * cpan> o conf unzip /usr/bin/unzip * cpan> o conf commit * cpan> quit library@library-desktop:~$ sudo cpan Terminal does not support AddHistory. cpan shell -- CPAN exploration and modules installation (v1.9402) Enter 'h' for help. cpan[1]> o conf commit commit: wrote '/etc/perl/CPAN/Config.pm' cpan[2]> o conf unzip /usr/bin/unzip unzip [/usr/n/unzip] Please use 'o conf commit' to make the config permanent! cpan[3]> o conf commit commit: wrote '/etc/perl/CPAN/Config.pm' cpan[4]> quit Terminal does not support GetHistory. Lockfile removed. library@library-desktop:~$ sudo cpan Terminal does not support AddHistory. cpan shell -- CPAN exploration and modules installation (v1.9402) Enter 'h' for help. cpan[1]> MARC::Crosswalk::DublinCore GD \ GD::Barcode::UPCE HTML::Scrubber\ Algorithm::CheckDigits::M43_001Biblio::EndnoteStyle\ Email::Date YAML PDF::Reuse PDF::Reuse::Barcode \ Locale::Currency::Format > > > > Catching error: "Can't locate object method \"DublinCore\" via package \"MARC::Crosswalk\" (perhaps you forgot to load \"MARC::Crosswalk\"?) at /usr/share/perl/5.10/CPAN.pm line 375, <FIN> line 5.\cJ" at /usr/share/perl/5.10/CPAN.pm line 391 CPAN::shell() called at /usr/bin/cpan line 198 cpan[2]> MARC::Crosswalk::DublinCore GD Catching error: "Can't locate object method \"DublinCore\" via package \"MARC::Crosswalk\" (perhaps you forgot to load \"MARC::Crosswalk\"?) at /usr/share/perl/5.10/CPAN.pm line 375, <FIN> line 6.\cJ" at /usr/share/perl/5.10/CPAN.pm line 391 CPAN::shell() called at /usr/bin/cpan line 198 cpan[3]> let me know what is the problem for that ------------------------------------------------------------------------------------------ am stuck here . please help me is the above example i followed is correct Thanks -- View this message in context: http://koha.1045719.n5.nabble.com/koha-installetion-help-tp3290700p3290700.h... Sent from the Koha - Discuss mailing list archive at Nabble.com.