[Koha] [Koha-devel] Barcode Don't Found

[Roche III, Edward]

How do you create the filter? 

Thanks!
Ed

Edward J. Roche
Network Administrator
Solanco School District
717.786.2151 x2437

"At the End of the Day, Did You Play to Win or Not to Lose?" 
     


-----Original Message-----
From: Michael Hafen [mailto:mdhafen at tech.washk12.org] 
Sent: Friday, March 27, 2009 11:29 AM
To: Roche III, Edward
Cc: koha-devel at lists.koha.org
Subject: Re: [Koha-devel] [Koha] Barcode Don't Found

I have in my libraries several copies with a "T " before the number part
of the barcode.  Koha works with it fine.  I find the trick is to make
sure what's in the Koha database and what's encoded in the barcode are
the same.  It is possible with itemInputBarcodeFilter processing.  I've
used that sys. pref. to strip leading spaces ( which I put in ) from
some barcodes.

If what you want is to be able to enter just the number, or the "T " and
the number ( like from a barcode scanner ), then I think making a custom
itemInputBarcodeFilter ( like I did to trim leading spaces ) would be a
good solution.

On Fri, 2009-03-27 at 10:00 -0400, Roche III, Edward wrote:
> That is an idea but I would think there was a way to have Koha except
> the T+space.
> 
> Thanks!
> Ed
> 
> Edward J. Roche
> Network Administrator
> Solanco School District
> 717.786.2151 x2437
> 
> "At the End of the Day, Did You Play to Win or Not to Lose?" 
>      
> 
> 
> -----Original Message-----
> From: koha-bounces at lists.katipo.co.nz
> [mailto:koha-bounces at lists.katipo.co.nz] On Behalf Of Owen Leonard
> Sent: Friday, March 27, 2009 9:52 AM
> To: koha at lists.katipo.co.nz
> Subject: Re: [Koha] [Koha-devel] Barcode Don't Found
> 
> > Currently doing it by hand but have tried with the scanner with no
> luck.
> 
> I asked because sometimes scanners are configured to add characters
> where you might not expect them. I did a quick test in my 3.0
> installation and didn't have any problem typing in the barcode.. I
> don't have any prefix options specified.
> 
> What I wonder is if you couldn't store just the numeric portion of the
> barcode (if it's the T+space causing the problem) and configure your
> scanners to strip off the "T "? Of course you'd have to consult the
> documentation for your scanners to know if that was possible. We've
> done something similar in the past.
> 
>   -- Owen
> 
-- 
Michael Hafen
Systems Analyst and Programmer
Washington County School District
Utah, USA

for Koha checkout
http://koha-dev.washk12.org
or
git://koha-dev.washk12.org/koha