[Koha] Problem in Installation of KOHA-3.00.03 in fedora 10

[Sivasankari]

Hi,
Thanks for your reply. I tried with the one you specified
   cpan -fi Net::Z3950::ZOOM.
I tried with http://krishnanm.com/khh/resources , which gives instruction to
reconfigure cpan and then i tried to install the zoom module
Again it shows the error
==SCREEN OUPUT===
Running install for module 'Net::Z3950::ZOOM'
Running make for M/MI/MIRK/Net-Z3950-ZOOM-1.25.tar.gz
  Has already been unwrapped into directory
/root/.cpan/build/Net-Z3950-ZOOM-1.25-zyzKPg
  '/usr/bin/perl Makefile.PL' returned status 512, won't make
Running make test
  Make had some problems, won't test
Running make install
  Make had some problems, won't install
==SCREEN OUPUT===

Kindly help over this Net-Z3950-ZOOM module installation in Fedora10

Thanks
Sivasankari m

----- Original Message ----- 
From: "P. Sunthar" <sunthar at che.iitb.ac.in>
To: "Krishnan M" <kmlist at yahoo.in>
Cc: <Koha at lists.katipo.co.nz>; "Sivasankari" <rms at srasys.co.in>
Sent: Saturday, July 11, 2009 10:56 PM
Subject: Re: [Koha] Problem in Installation of KOHA-3.00.03 in fedora 10




Hi,

 We are not using zebra. (Ours is a small lib and threfore don't require
this).  As you rightly did,
I also had to force install Zoom. Following are some tips from my own
notes.

   cpan -fi Net::Z3950::ZOOM


# repeated above more than once to get all dependencies installed
# Archive-Zip-1.30.tar.gz was not found it iitb CPAN site
# downloaded from net, untarred in /tmp
make Makefile.PL
make
make install


 On the second part of your question:
 Web install takes place only after make install at command prompt. It is
not independent of it. I used two guidelines for installation. 1. available
in the koha root directory INSTALL.fedora7, and Krishnan's notes.
It worked.  Nothing specifically new.

Sunthar.

On Sat, 11 Jul 2009 22:14:42 +0530 (IST), Krishnan M <kmlist at yahoo.in>
wrote:
> Hello Sivasankari,
>
> Sunthar in Mumbai told me a week ago that he successfully installed Koha
3
> on Fedora 10 using notes for a similar install for Fedora 9 that i
provide
> at http://krishnanm.com/khh/resources with a few departures.
>
> We intended to document these differences for a version of the install
> HOW-TO for Fedora 10, but haven't done so yet. i am cc'ing Sunthar here
and
> requesting that he share his experience sooner rather than later, as i am
> not sure if he's on the list.
>
> i remember that getting ZOOM to install is troublesome, but there's a
> particular way to get around it, but don't quite remember what it is.
>
> regards,
> krishnan
>
> --- On Sat, 11/7/09, Sivasankari <rms at srasys.co.in> wrote:
>
>
> From: Sivasankari <rms at srasys.co.in>
> Subject: [Koha] Problem in Installation of KOHA-3.00.03 in fedora 10
> To: Koha at lists.katipo.co.nz
> Date: Saturday, 11 July, 2009, 12:15 PM
>
>
>
>
>
> Hi All,
> I have asked a query mentioned below.
>
> The following fatal error has occurred:Can't locate ZOOM.pm in @INC
>
> Some of members have answered it. Thanks for those replies.
>
> Koha was already installed in my machine at /usr/shar/KOHA-3.00.03.
- I
> have already ran the perl Makefile.PL from the /usr/share/koha-3.00.03
> folder , then make,make test,make install and then web installer
launched,
> which shows the error in browser , can't locate zoom.pm in @Inc in the
web
> browser window
> while i gave http::/<ipaddress>:80/ .
>
>
>
>
> I started the process of installing the left over prerequisite module
> Net::Z3950::ZOOM 1.16. Which needs yaz and zebra to be installed. I
> searched and found the yaz rpm for fedora10, and installed yaz (
> yaz-3.0.34-1.fc10.i386.rpm). But for idzebra i dont find the rpm for
> fedora10. it is available for fc6. Hence i downloaded
> idzebra-2.0.8.tar.gz. unzipped it and ran the ./configure,Make,Make
> install..
>
> After this , I called
> cpan > reload cpan .
>
> Now I gave
> cpan > force install Net::Z3950::ZOOM
> It shows the errors
>
> ====Screen output ==========
> cpan[2]> force install Net::Z3950::ZOOM
> Running install for module 'Net::Z3950::ZOOM'
> Running make for M/MI/MIRK/Net-Z3950-ZOOM-1.25.tar.gz
> Has already been unwrapped into directory
> /root/.cpan/build/Net-Z3950-ZOOM-1.25-zyzKPg
> '/usr/bin/perl Makefile.PL' returned status 512, won't make
> Running make test
> Make had some problems, won't test
> Running make install
> Make had some problems, won't install
> =======Screen Output================
>
> What shall i do? Will there be problem with installation of this module
> with Fedora10.
> I'm unable to launch koha with web installer. Since this essential module
> is needed. Did i need to uninstall koha and start from beginning.
> Or else can i run once again /usr/shar/KOHA-3.00.03.>perl Makefile.PL -
> reinstalling koha directly.
>
> Kindly help me out on this.
> Thanks in advance
> Sivasankari
>
>
>
>
>
>
>
>
>
>
> -----Inline Attachment Follows-----
>
>
> _______________________________________________
> Koha mailing list
> Koha at lists.katipo.co.nz
> http://lists.katipo.co.nz/mailman/listinfo/koha
>
>
>
>       Love Cricket? Check out live scores, photos, video highlights and
>       more. Click here http://cricket.yahoo.com

-- 
P Sunthar               http://www.che.iitb.ac.in/online/faculty/p-sunthar
 Asst. Professor
 Dept of Chemical Engg                       Ph:+91-22-2576 7229
 Indian Institute of Technology Bombay      P.Sunthar <at> iitb.ac.in
 Powai, Mumbai 400 076, INDIA