[Koha] re installing with a clean Debian and Koha 3.0

David Schuster dschust1 at tx.rr.com
Wed Aug 20 14:56:50 NZST 2008


All I can say is where did I go wrong!  I'm using the etch due to hardware
limitations etc...  Don't ask.

Here are the other items that I had to fiddle with based on the
documentation for a "standard" installation:

Mon Aug 18 22:31:46 2008] Makefile.PL: Warning: prerequisite GD 2.39 not
found.
[Mon Aug 18 22:31:46 2008] Makefile.PL: Warning: prerequisite HTML::Scrubber
0.08 not found.
[Mon Aug 18 22:31:48 2008] Makefile.PL: Warning: prerequisite
Net::Z3950::ZOOM 1.16 not found.
[Mon Aug 18 22:31:50 2008] Makefile.PL: Warning: prerequisite SMS::Send 0.05
not found.
[Mon Aug 18 22:31:50 2008] Makefile.PL: Warning: prerequisite Text::CSV 0.01
not found. We have unknown version.
[Mon Aug 18 22:31:50 2008] Makefile.PL: Warning: prerequisite Text::CSV_XS
0.32 not found. We have 0.23.
[Mon Aug 18 22:31:50 2008] Makefile.PL: Warning: prerequisite Text::Iconv
1.7 not found. We have 1.4.
CPAN.pm: Going to build L/LD/LDS/GD-2.41.tar.gz

I believe I have all of them resolved now except the Net::Z3950::ZOOM

My current problem is the Net::Z3950:ZOOM - fails every time I run the sudo
cpan command.

Net-Z3950-ZOOM-1.24/lib/Net/Z3950.pm

  CPAN.pm: Going to build M/MI/MIRK/Net-Z3950-ZOOM-1.24.tar.gz

ERROR: Unable to call script: yaz-config
If you are using a YAZ installation from the Debian package "yaz", you
will also need to install "libyaz-dev" in order to build this module.
Running make test
  Make had some problems, maybe interrupted? Won't test
Running make install
  Make had some problems, maybe interrupted? Won't install

I've fiddled with this quite a bit with several suggestions from the past
but have not had much luck.  

Sorry to say I had things working with Alpha and Beta and then decided to
"reload" from scratch and now can't get the blasted thing to run all the way
through.

Open for suggestions.  So when I forged ahead with the install despite
errors I get the :
Koha error

The following fatal error has occurred:

Can't locate ZOOM.pm in @INC (@INC contains: /usr/share/koha/lib /etc/perl
/usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5
/usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8
/usr/local/lib/site_perl .) at /usr/share/koha/lib/C4/Context.pm line 84.
BEGIN failed--compilation aborted at /usr/share/koha/lib/C4/Context.pm line
84.
Compilation failed in require at /usr/share/koha/lib/C4/Auth.pm line 29.
BEGIN failed--compilation aborted at /usr/share/koha/lib/C4/Auth.pm line 29.
Compilation failed in require at
/usr/share/koha/intranet/cgi-bin/errors/404.pl line 21.
BEGIN failed--compilation aborted at
/usr/share/koha/intranet/cgi-bin/errors/404.pl line 21.

David

Vincent Danjean-3 wrote:
> 
> David Schuster wrote:
>> I'm doing a clean reload as I played a lot with Debian and think I messed
>> it
>> up pretty good.  I did a backup of my 3.0 beta and plan to reload it.
>> 
>> Here is my question:
>> 
>> I see that Apache now comes with Debian already installed as part of the
>> install.  I also noticed that as I was doing the dselect it is pulling
>> mysql.
> 
> Do you use lenny (testing) or etch (stable) ?
> From lenny, apt (and other installation tools) installs 'Recommended'
> packages
> of newly installed packages by default (on etch, only 'Depended' packages
> were
> installed)
> 
>> So for those that do Debian is it necessary to go through the work of
>> downloading those up front?  For a librarian doing this on their own they
>> won't need to do that correct?
> 
> I hope a Debian package will be available soon...
> By the way, all koha dependencies for lenny should be available in
> official
> Debian now (in lenny or in sid for the last ones that have not migrated in
> testing). If you use lenny, let me know if some are still missing.
> 
>   Best regards,
>     Vincent
> 
>> Just checking...
> 
> -- 
> Vincent Danjean                 Adresse: Laboratoire d'Informatique de
> Grenoble
> Téléphone:  +33 4 76 61 20 11            ENSIMAG - antenne de Montbonnot
> Fax:        +33 4 76 61 20 99            ZIRST 51, avenue Jean Kuntzmann
> Email: Vincent.Danjean at imag.fr           38330 Montbonnot Saint Martin
> _______________________________________________
> Koha mailing list
> Koha at lists.katipo.co.nz
> http://lists.katipo.co.nz/mailman/listinfo/koha
> 
> 

-- 
View this message in context: http://www.nabble.com/reinstalling-with-a-clean-Debian-and-Koha-3.0-tp19042277p19062205.html
Sent from the Koha - Discuss mailing list archive at Nabble.com.



More information about the Koha mailing list