Re: [Koha] switching from 'standard' to 'dev'
All - I have created the new symlink for the koha site (it appears in the / etc/apache2/sites-available)... I did not see a web-installer when navigating to the koha- intranet.... should I see one when I make the reinstall from standard to dev (I was already on Koha 3.00.00.107)... Made all my changes in the record.abs indexers and I am now rerunning the zebra-indexer. (the indexer is showing the correct directories in kohaclone like it did before) --I will let you all know what I see after the indexer completes. Further response in message below. Thanks, Brendan On Aug 11, 2008, at 4:45 PM, Joshua Ferraro wrote:
Hey Brendan,
Can you please post your responses to the list, that way they are archived for others to see and others may spot stuff I don't.
First off, are you on debian, and are you running apache2? Are you familiar with the apache2 sites-available and sites-enabled paradigm and with the 'a2ensite' and 'a2enmod' utilities? These are the best starting places :-)
I have some kind of idea --
Josh
On Mon, Aug 11, 2008 at 4:33 PM, Brendan Gallagher <gallabr@biblio.org> wrote:
ln –s /root/koha-dev/etc/koha-httpd.conf /etc/apache2/sites- available/koha ln: target `/etc/apache2/sites-available/koha' is not a directory
Stuck here...
On Aug 11, 2008, at 4:26 PM, Joshua Ferraro wrote:
On Mon, Aug 11, 2008 at 4:21 PM, Brendan Gallagher <gallabr@biblio.org
wrote:
Hi All --
I need a little help...
I just recently tried to switch my Koha 3 install from a 'standard' to a 'dev' install...
These are the steps that I completed...
1. cd kohaclone 2. git pull --> (to get the most recent release) 3. perl Makefile.PL
Did you choose 'dev' at this point, and use the same database name, database user name, password, etc.?
Yes - same for everything....
4. make 5. make test 6. make install
At this point you should have fines in /home/myuser/koha-dev. Rather than use the koha-httpd.conf from before you want to symlink home/myuser/koha-dev/etc/koha-httpd.conf to /etc/apache2/sites-available/koha and then a2ensite koha. You no longer need that older installation's filesystem /user/share/koha or wherever else the old install files are, everything's now in kohaclone, and /home/myuser/koha-dev.
7. make changes to the koha-httpd.conf (navigated to the intranet homepage and never got the web-installer screen like I did for all other upgrades/installs) 8. export KOHA_DIR and PERL5LIB
Those are the directories that I identified....
Make sure PERL5LIB is kohaclone, and KOHA_CONF is /home/myuser/koha-dev/etc/koha-conf.xml
Hope that helps,
Josh
9.. rebuild_zebra.pl -b -r (from the kohaclone/misc/migration_tools directory)
I originally made changes to my zebra indexer located here /etc/koha/zebradb/marc_defs/marc21/biblios/record.abs after all this I know that I must make changes to the zebra indexer /etc/zebradb/marc_defs/marc21/biblios/record.abs --> but I can not find that file... all I can find is this location --> /root/kohaclone/etc/zebradb/marc_defs/marc21/biblios/record.abs and I made the changes here plus ran my zebra indexer --> no luck
All of the changes/configs that I made in the standard install have transferred to my new set up -- but none of my records or index's have changed. I realize that I need to reindex but I am stuck since rebuilding does not show my records...
All of my item records are in the 949 field and not the 952 field(koha default).
Any advice would be greatly appreciated.
Cheers, Brendan
++++++++++++++++++++++++++++++++++++++++++++ Brendan A. Gallagher Software Services Coordinator Bibliomation, INC. Middlebury, CT 06762 http://www.biblio.org ++++++++++++++++++++++++++++++++++++++++++++
-- Joshua Ferraro SUPPORT FOR OPEN-SOURCE SOFTWARE CEO migration, training, maintenance, support LibLime Featuring Koha Open-Source ILS jmf@liblime.com |Full Demos at http://liblime.com/koha | 1(888)KohaILS
-- Joshua Ferraro SUPPORT FOR OPEN-SOURCE SOFTWARE CEO migration, training, maintenance, support LibLime Featuring Koha Open-Source ILS jmf@liblime.com |Full Demos at http://liblime.com/koha |1(888)KohaILS
No Luck -- (after running rebuild_zebra.pl none of my records are searchable) - zebra is running, all the files I can think of are pointing to the koha-dev and kohaclone, plus making appropriate changes to record.abs.... Back to the drawing board in the morning. Should I see the web-installer page after I have re-installed from standard to dev? just curious because I did not see this happen... Thanks, Brendan On Aug 11, 2008, at 5:06 PM, Brendan Gallagher wrote:
All -
I have created the new symlink for the koha site (it appears in the / etc/apache2/sites-available)...
I did not see a web-installer when navigating to the koha- intranet.... should I see one when I make the reinstall from standard to dev (I was already on Koha 3.00.00.107)...
Made all my changes in the record.abs indexers and I am now rerunning the zebra-indexer. (the indexer is showing the correct directories in kohaclone like it did before)
--I will let you all know what I see after the indexer completes.
Further response in message below.
Thanks, Brendan
On Aug 11, 2008, at 4:45 PM, Joshua Ferraro wrote:
Hey Brendan,
Can you please post your responses to the list, that way they are archived for others to see and others may spot stuff I don't.
First off, are you on debian, and are you running apache2? Are you familiar with the apache2 sites-available and sites-enabled paradigm and with the 'a2ensite' and 'a2enmod' utilities? These are the best starting places :-)
I have some kind of idea --
Josh
On Mon, Aug 11, 2008 at 4:33 PM, Brendan Gallagher <gallabr@biblio.org> wrote:
ln –s /root/koha-dev/etc/koha-httpd.conf /etc/apache2/sites- available/koha ln: target `/etc/apache2/sites-available/koha' is not a directory
Stuck here...
On Aug 11, 2008, at 4:26 PM, Joshua Ferraro wrote:
On Mon, Aug 11, 2008 at 4:21 PM, Brendan Gallagher <gallabr@biblio.org
wrote:
Hi All --
I need a little help...
I just recently tried to switch my Koha 3 install from a 'standard' to a 'dev' install...
These are the steps that I completed...
1. cd kohaclone 2. git pull --> (to get the most recent release) 3. perl Makefile.PL
Did you choose 'dev' at this point, and use the same database name, database user name, password, etc.?
Yes - same for everything....
4. make 5. make test 6. make install
At this point you should have fines in /home/myuser/koha-dev. Rather than use the koha-httpd.conf from before you want to symlink home/myuser/koha-dev/etc/koha-httpd.conf to /etc/apache2/sites-available/koha and then a2ensite koha. You no longer need that older installation's filesystem /user/share/koha or wherever else the old install files are, everything's now in kohaclone, and /home/myuser/koha-dev.
7. make changes to the koha-httpd.conf (navigated to the intranet homepage and never got the web-installer screen like I did for all other upgrades/installs) 8. export KOHA_DIR and PERL5LIB
Those are the directories that I identified....
Make sure PERL5LIB is kohaclone, and KOHA_CONF is /home/myuser/koha-dev/etc/koha-conf.xml
Hope that helps,
Josh
9.. rebuild_zebra.pl -b -r (from the kohaclone/misc/ migration_tools directory)
I originally made changes to my zebra indexer located here /etc/koha/zebradb/marc_defs/marc21/biblios/record.abs after all this I know that I must make changes to the zebra indexer /etc/zebradb/marc_defs/marc21/biblios/record.abs --> but I can not find that file... all I can find is this location --> /root/kohaclone/etc/zebradb/marc_defs/marc21/biblios/record.abs and I made the changes here plus ran my zebra indexer --> no luck
All of the changes/configs that I made in the standard install have transferred to my new set up -- but none of my records or index's have changed. I realize that I need to reindex but I am stuck since rebuilding does not show my records...
All of my item records are in the 949 field and not the 952 field(koha default).
Any advice would be greatly appreciated.
Cheers, Brendan
++++++++++++++++++++++++++++++++++++++++++++ Brendan A. Gallagher Software Services Coordinator Bibliomation, INC. Middlebury, CT 06762 http://www.biblio.org ++++++++++++++++++++++++++++++++++++++++++++
-- Joshua Ferraro SUPPORT FOR OPEN-SOURCE SOFTWARE CEO migration, training, maintenance, support LibLime Featuring Koha Open-Source ILS jmf@liblime.com |Full Demos at http://liblime.com/koha | 1(888)KohaILS
-- Joshua Ferraro SUPPORT FOR OPEN-SOURCE SOFTWARE CEO migration, training, maintenance, support LibLime Featuring Koha Open-Source ILS jmf@liblime.com |Full Demos at http://liblime.com/koha |1(888)KohaILS
_______________________________________________ Koha mailing list Koha@lists.katipo.co.nz http://lists.katipo.co.nz/mailman/listinfo/koha
On Mon, Aug 11, 2008 at 5:58 PM, Brendan Gallagher <gallabr@biblio.org> wrote:
No Luck -- (after running rebuild_zebra.pl none of my records are searchable) - zebra is running, all the files I can think of are pointing to the koha-dev and kohaclone, plus making appropriate changes to record.abs....
Back to the drawing board in the morning.
Should I see the web-installer page after I have re-installed from standard to dev? just curious because I did not see this happen...
Are you sure your Koha installation is running off of the new filesystem install and not the old one? Did you remove the old koha httpd.conf and koha-conf.xml files to be sure? The web installer wouldn't show up because your database is already created and running. Josh
Thanks, Brendan
On Aug 11, 2008, at 5:06 PM, Brendan Gallagher wrote:
All -
I have created the new symlink for the koha site (it appears in the / etc/apache2/sites-available)...
I did not see a web-installer when navigating to the koha- intranet.... should I see one when I make the reinstall from standard to dev (I was already on Koha 3.00.00.107)...
Made all my changes in the record.abs indexers and I am now rerunning the zebra-indexer. (the indexer is showing the correct directories in kohaclone like it did before)
--I will let you all know what I see after the indexer completes.
Further response in message below.
Thanks, Brendan
On Aug 11, 2008, at 4:45 PM, Joshua Ferraro wrote:
Hey Brendan,
Can you please post your responses to the list, that way they are archived for others to see and others may spot stuff I don't.
First off, are you on debian, and are you running apache2? Are you familiar with the apache2 sites-available and sites-enabled paradigm and with the 'a2ensite' and 'a2enmod' utilities? These are the best starting places :-)
I have some kind of idea --
Josh
On Mon, Aug 11, 2008 at 4:33 PM, Brendan Gallagher <gallabr@biblio.org> wrote:
ln –s /root/koha-dev/etc/koha-httpd.conf /etc/apache2/sites- available/koha ln: target `/etc/apache2/sites-available/koha' is not a directory
Stuck here...
On Aug 11, 2008, at 4:26 PM, Joshua Ferraro wrote:
On Mon, Aug 11, 2008 at 4:21 PM, Brendan Gallagher <gallabr@biblio.org
wrote:
Hi All --
I need a little help...
I just recently tried to switch my Koha 3 install from a 'standard' to a 'dev' install...
These are the steps that I completed...
1. cd kohaclone 2. git pull --> (to get the most recent release) 3. perl Makefile.PL
Did you choose 'dev' at this point, and use the same database name, database user name, password, etc.?
Yes - same for everything....
4. make 5. make test 6. make install
At this point you should have fines in /home/myuser/koha-dev. Rather than use the koha-httpd.conf from before you want to symlink home/myuser/koha-dev/etc/koha-httpd.conf to /etc/apache2/sites-available/koha and then a2ensite koha. You no longer need that older installation's filesystem /user/share/koha or wherever else the old install files are, everything's now in kohaclone, and /home/myuser/koha-dev.
7. make changes to the koha-httpd.conf (navigated to the intranet homepage and never got the web-installer screen like I did for all other upgrades/installs) 8. export KOHA_DIR and PERL5LIB
Those are the directories that I identified....
Make sure PERL5LIB is kohaclone, and KOHA_CONF is /home/myuser/koha-dev/etc/koha-conf.xml
Hope that helps,
Josh
9.. rebuild_zebra.pl -b -r (from the kohaclone/misc/migration_tools directory)
I originally made changes to my zebra indexer located here /etc/koha/zebradb/marc_defs/marc21/biblios/record.abs after all this I know that I must make changes to the zebra indexer /etc/zebradb/marc_defs/marc21/biblios/record.abs --> but I can not find that file... all I can find is this location --> /root/kohaclone/etc/zebradb/marc_defs/marc21/biblios/record.abs and I made the changes here plus ran my zebra indexer --> no luck
All of the changes/configs that I made in the standard install have transferred to my new set up -- but none of my records or index's have changed. I realize that I need to reindex but I am stuck since rebuilding does not show my records...
All of my item records are in the 949 field and not the 952 field(koha default).
Any advice would be greatly appreciated.
Cheers, Brendan
++++++++++++++++++++++++++++++++++++++++++++ Brendan A. Gallagher Software Services Coordinator Bibliomation, INC. Middlebury, CT 06762 http://www.biblio.org ++++++++++++++++++++++++++++++++++++++++++++
-- Joshua Ferraro SUPPORT FOR OPEN-SOURCE SOFTWARE CEO migration, training, maintenance, support LibLime Featuring Koha Open-Source ILS jmf@liblime.com |Full Demos at http://liblime.com/koha | 1(888)KohaILS
-- Joshua Ferraro SUPPORT FOR OPEN-SOURCE SOFTWARE CEO migration, training, maintenance, support LibLime Featuring Koha Open-Source ILS jmf@liblime.com |Full Demos at http://liblime.com/koha |1(888)KohaILS
_______________________________________________ Koha mailing list Koha@lists.katipo.co.nz http://lists.katipo.co.nz/mailman/listinfo/koha
-- Joshua Ferraro SUPPORT FOR OPEN-SOURCE SOFTWARE CEO migration, training, maintenance, support LibLime Featuring Koha Open-Source ILS jmf@liblime.com |Full Demos at http://liblime.com/koha |1(888)KohaILS
Josh - Yup removed both files... I think this is could be the issue... --- I still have the ln -s to zebra-ctl.sh (and zebraqueue) from the /usr/share {KOHA_DIR} and not the newly created koha-dev ( I was doing the export KOHA_CONF before running the rebuild_zebra.pl --> the first three lines all pointed to the newly created directories). But I feel like that could be the problem. Zebra biblio directory = /root/koha-dev/var/lib/zebradb/biblios Zebra authorities directory = /root/koha-dev/var/lib/zebradb/authorities Koha directory = /root/kohaclone BIBLIONUMBER in : 999$c BIBLIOITEMNUMBER in : 999$d I will change these in the morning, as I a busy until then.... I will post my results in the morning... thanks, Brendan On Aug 11, 2008, at 8:54 PM, Joshua Ferraro wrote:
On Mon, Aug 11, 2008 at 5:58 PM, Brendan Gallagher <gallabr@biblio.org> wrote:
No Luck -- (after running rebuild_zebra.pl none of my records are searchable) - zebra is running, all the files I can think of are pointing to the koha-dev and kohaclone, plus making appropriate changes to record.abs....
Back to the drawing board in the morning.
Should I see the web-installer page after I have re-installed from standard to dev? just curious because I did not see this happen...
Are you sure your Koha installation is running off of the new filesystem install and not the old one? Did you remove the old koha httpd.conf and koha- conf.xml files to be sure?
The web installer wouldn't show up because your database is already created and running.
Josh
Thanks, Brendan
On Aug 11, 2008, at 5:06 PM, Brendan Gallagher wrote:
All -
I have created the new symlink for the koha site (it appears in the / etc/apache2/sites-available)...
I did not see a web-installer when navigating to the koha- intranet.... should I see one when I make the reinstall from standard to dev (I was already on Koha 3.00.00.107)...
Made all my changes in the record.abs indexers and I am now rerunning the zebra-indexer. (the indexer is showing the correct directories in kohaclone like it did before)
--I will let you all know what I see after the indexer completes.
Further response in message below.
Thanks, Brendan
On Aug 11, 2008, at 4:45 PM, Joshua Ferraro wrote:
Hey Brendan,
Can you please post your responses to the list, that way they are archived for others to see and others may spot stuff I don't.
First off, are you on debian, and are you running apache2? Are you familiar with the apache2 sites-available and sites-enabled paradigm and with the 'a2ensite' and 'a2enmod' utilities? These are the best starting places :-)
I have some kind of idea --
Josh
On Mon, Aug 11, 2008 at 4:33 PM, Brendan Gallagher <gallabr@biblio.org> wrote:
ln –s /root/koha-dev/etc/koha-httpd.conf /etc/apache2/sites- available/koha ln: target `/etc/apache2/sites-available/koha' is not a directory
Stuck here...
On Aug 11, 2008, at 4:26 PM, Joshua Ferraro wrote:
On Mon, Aug 11, 2008 at 4:21 PM, Brendan Gallagher <gallabr@biblio.org > wrote: > > Hi All -- > > I need a little help... > > I just recently tried to switch my Koha 3 install from a > 'standard' to a > 'dev' install... > > These are the steps that I completed... > > 1. cd kohaclone > 2. git pull --> (to get the most recent release) > 3. perl Makefile.PL
Did you choose 'dev' at this point, and use the same database name, database user name, password, etc.?
Yes - same for everything....
> 4. make > 5. make test > 6. make install
At this point you should have fines in /home/myuser/koha-dev. Rather than use the koha-httpd.conf from before you want to symlink home/myuser/koha-dev/etc/koha-httpd.conf to /etc/apache2/sites-available/koha and then a2ensite koha. You no longer need that older installation's filesystem /user/share/koha or wherever else the old install files are, everything's now in kohaclone, and /home/myuser/koha-dev.
> 7. make changes to the koha-httpd.conf (navigated to the > intranet > homepage > and never got the web-installer screen like I did for all other > upgrades/installs) > 8. export KOHA_DIR and PERL5LIB
Those are the directories that I identified....
>
Make sure PERL5LIB is kohaclone, and KOHA_CONF is /home/myuser/koha-dev/etc/koha-conf.xml
Hope that helps,
Josh
> 9.. rebuild_zebra.pl -b -r (from the kohaclone/misc/ > migration_tools > directory) > > I originally made changes to my zebra indexer located here > /etc/koha/zebradb/marc_defs/marc21/biblios/record.abs > after all this I know that I must make changes to the zebra > indexer > /etc/zebradb/marc_defs/marc21/biblios/record.abs --> but I can > not find > that file... all I can find is this location --> > /root/kohaclone/etc/zebradb/marc_defs/marc21/biblios/record.abs > and I > made > the changes here plus ran my zebra indexer --> no luck > > > All of the changes/configs that I made in the standard install > have > transferred to my new set up -- but none of my records or > index's > have > changed. I realize that I need to reindex but I am stuck since > rebuilding > does not show my records... > > All of my item records are in the 949 field and not the 952 > field(koha > default). > > Any advice would be greatly appreciated. > > Cheers, > Brendan > > > ++++++++++++++++++++++++++++++++++++++++++++ > Brendan A. Gallagher > Software Services Coordinator > Bibliomation, INC. > Middlebury, CT 06762 > http://www.biblio.org > ++++++++++++++++++++++++++++++++++++++++++++ >
-- Joshua Ferraro SUPPORT FOR OPEN-SOURCE SOFTWARE CEO migration, training, maintenance, support LibLime Featuring Koha Open-Source ILS jmf@liblime.com |Full Demos at http://liblime.com/koha | 1(888)KohaILS
-- Joshua Ferraro SUPPORT FOR OPEN-SOURCE SOFTWARE CEO migration, training, maintenance, support LibLime Featuring Koha Open-Source ILS jmf@liblime.com |Full Demos at http://liblime.com/koha | 1(888)KohaILS
_______________________________________________ Koha mailing list Koha@lists.katipo.co.nz http://lists.katipo.co.nz/mailman/listinfo/koha
-- Joshua Ferraro SUPPORT FOR OPEN-SOURCE SOFTWARE CEO migration, training, maintenance, support LibLime Featuring Koha Open-Source ILS jmf@liblime.com |Full Demos at http://liblime.com/koha |1(888)KohaILS
Yea, you'll need to use the new zebra-ctl.sh ... and we've dropped support for zebraqueue daemon, and switched to rebuild_zebra.pl with the -z option run from cron (check the INSTALL file for details). I bet if you restart Zebra you'll be good to go. You can test by running zebrasrv directly: zebrasrv -c /root/koha-dev/etc/koha-conf.xml BTW: It's probably best to run Koha as a non-root user. I'd suggest creating a 'koha' user and installing Koha as that user, running zebra as that user, etc. Cheers, Josh On Mon, Aug 11, 2008 at 9:21 PM, Brendan Gallagher <gallabr@biblio.org> wrote:
Josh -
Yup removed both files...
I think this is could be the issue... --- I still have the ln -s to zebra-ctl.sh (and zebraqueue) from the /usr/share {KOHA_DIR} and not the newly created koha-dev ( I was doing the export KOHA_CONF before running the rebuild_zebra.pl --> the first three lines all pointed to the newly created directories). But I feel like that could be the problem.
Zebra biblio directory = /root/koha-dev/var/lib/zebradb/biblios Zebra authorities directory = /root/koha-dev/var/lib/zebradb/authorities Koha directory = /root/kohaclone BIBLIONUMBER in : 999$c BIBLIOITEMNUMBER in : 999$d
I will change these in the morning, as I a busy until then.... I will post my results in the morning...
thanks, Brendan
On Aug 11, 2008, at 8:54 PM, Joshua Ferraro wrote:
On Mon, Aug 11, 2008 at 5:58 PM, Brendan Gallagher <gallabr@biblio.org> wrote:
No Luck -- (after running rebuild_zebra.pl none of my records are searchable) - zebra is running, all the files I can think of are pointing to the koha-dev and kohaclone, plus making appropriate changes to record.abs....
Back to the drawing board in the morning.
Should I see the web-installer page after I have re-installed from standard to dev? just curious because I did not see this happen...
Are you sure your Koha installation is running off of the new filesystem install and not the old one? Did you remove the old koha httpd.conf and koha-conf.xml files to be sure?
The web installer wouldn't show up because your database is already created and running.
Josh
Thanks, Brendan
On Aug 11, 2008, at 5:06 PM, Brendan Gallagher wrote:
All -
I have created the new symlink for the koha site (it appears in the / etc/apache2/sites-available)...
I did not see a web-installer when navigating to the koha- intranet.... should I see one when I make the reinstall from standard to dev (I was already on Koha 3.00.00.107)...
Made all my changes in the record.abs indexers and I am now rerunning the zebra-indexer. (the indexer is showing the correct directories in kohaclone like it did before)
--I will let you all know what I see after the indexer completes.
Further response in message below.
Thanks, Brendan
On Aug 11, 2008, at 4:45 PM, Joshua Ferraro wrote:
Hey Brendan,
Can you please post your responses to the list, that way they are archived for others to see and others may spot stuff I don't.
First off, are you on debian, and are you running apache2? Are you familiar with the apache2 sites-available and sites-enabled paradigm and with the 'a2ensite' and 'a2enmod' utilities? These are the best starting places :-)
I have some kind of idea --
Josh
On Mon, Aug 11, 2008 at 4:33 PM, Brendan Gallagher <gallabr@biblio.org> wrote:
ln –s /root/koha-dev/etc/koha-httpd.conf /etc/apache2/sites- available/koha ln: target `/etc/apache2/sites-available/koha' is not a directory
Stuck here...
On Aug 11, 2008, at 4:26 PM, Joshua Ferraro wrote:
> On Mon, Aug 11, 2008 at 4:21 PM, Brendan Gallagher > <gallabr@biblio.org >> > wrote: >> >> Hi All -- >> >> I need a little help... >> >> I just recently tried to switch my Koha 3 install from a >> 'standard' to a >> 'dev' install... >> >> These are the steps that I completed... >> >> 1. cd kohaclone >> 2. git pull --> (to get the most recent release) >> 3. perl Makefile.PL > > Did you choose 'dev' at this point, and use the same database name, > database > user name, password, etc.?
Yes - same for everything....
> > >> 4. make >> 5. make test >> 6. make install > > At this point you should have fines in /home/myuser/koha-dev. > Rather than > use > the koha-httpd.conf from before you want to symlink > home/myuser/koha-dev/etc/koha-httpd.conf > to /etc/apache2/sites-available/koha and then a2ensite koha. You > no longer > need that older installation's filesystem /user/share/koha or > wherever > else > the old install files are, everything's now in kohaclone, and > /home/myuser/koha-dev. > >> 7. make changes to the koha-httpd.conf (navigated to the intranet >> homepage >> and never got the web-installer screen like I did for all other >> upgrades/installs) >> 8. export KOHA_DIR and PERL5LIB
Those are the directories that I identified....
>> > > Make sure PERL5LIB is kohaclone, and KOHA_CONF is > /home/myuser/koha-dev/etc/koha-conf.xml > > Hope that helps, > > Josh > >> 9.. rebuild_zebra.pl -b -r (from the kohaclone/misc/migration_tools >> directory) >> >> I originally made changes to my zebra indexer located here >> /etc/koha/zebradb/marc_defs/marc21/biblios/record.abs >> after all this I know that I must make changes to the zebra >> indexer >> /etc/zebradb/marc_defs/marc21/biblios/record.abs --> but I can >> not find >> that file... all I can find is this location --> >> /root/kohaclone/etc/zebradb/marc_defs/marc21/biblios/record.abs >> and I >> made >> the changes here plus ran my zebra indexer --> no luck >> >> >> All of the changes/configs that I made in the standard install have >> transferred to my new set up -- but none of my records or index's >> have >> changed. I realize that I need to reindex but I am stuck since >> rebuilding >> does not show my records... >> >> All of my item records are in the 949 field and not the 952 >> field(koha >> default). >> >> Any advice would be greatly appreciated. >> >> Cheers, >> Brendan >> >> >> ++++++++++++++++++++++++++++++++++++++++++++ >> Brendan A. Gallagher >> Software Services Coordinator >> Bibliomation, INC. >> Middlebury, CT 06762 >> http://www.biblio.org >> ++++++++++++++++++++++++++++++++++++++++++++ >> > > > > -- > Joshua Ferraro SUPPORT FOR OPEN-SOURCE SOFTWARE > CEO migration, training, maintenance, support > LibLime Featuring Koha Open-Source ILS > jmf@liblime.com |Full Demos at http://liblime.com/koha | > 1(888)KohaILS
-- Joshua Ferraro SUPPORT FOR OPEN-SOURCE SOFTWARE CEO migration, training, maintenance, support LibLime Featuring Koha Open-Source ILS jmf@liblime.com |Full Demos at http://liblime.com/koha |1(888)KohaILS
_______________________________________________ Koha mailing list Koha@lists.katipo.co.nz http://lists.katipo.co.nz/mailman/listinfo/koha
-- Joshua Ferraro SUPPORT FOR OPEN-SOURCE SOFTWARE CEO migration, training, maintenance, support LibLime Featuring Koha Open-Source ILS jmf@liblime.com |Full Demos at http://liblime.com/koha |1(888)KohaILS
-- Joshua Ferraro SUPPORT FOR OPEN-SOURCE SOFTWARE CEO migration, training, maintenance, support LibLime Featuring Koha Open-Source ILS jmf@liblime.com |Full Demos at http://liblime.com/koha |1(888)KohaILS
Joshua Ferraro wrote:
Yea, you'll need to use the new zebra-ctl.sh ... and we've dropped support for zebraqueue daemon, and switched to rebuild_zebra.pl with the -z option run from cron (check the INSTALL file for details). I bet if you restart Zebra you'll be good to go. You can test by running zebrasrv directly:
zebrasrv -c /root/koha-dev/etc/koha-conf.xml
BTW: It's probably best to run Koha as a non-root user. I'd suggest creating a 'koha' user and installing Koha as that user, running zebra as that user, etc.
Cheers,
Josh
On Mon, Aug 11, 2008 at 9:21 PM, Brendan Gallagher <gallabr@biblio.org> wrote:
I made the changes to my installation directories --> I now reinstalled into /home/koha/koha-dev and made the changes to apache2, zebra-server/queue (created symlink to the new zebra-ctl.sh), but have not had a chance to re-index yet... Did export KOHA_CONF and PERL5LIB... I did run the following script and recieved errors: koha@Biblio-Koha:~$ zebrasrv -c /home/koha/koha-dev/etc/koha-conf.xml 13:13:47-12/08 [log] zebra_start 2.0.32 /home/koha/koha-dev/etc/koha-conf.xml 13:13:47-12/08 [fatal] /home/koha/koha-dev/etc/koha-conf.xml:2 missing colon after '<yazgfs>' 13:13:47-12/08 [fatal] Failed to read config `/home/koha/koha-dev/etc/koha-conf.xml' Thanks, Brendan
participants (3)
-
Brendan A. Gallagher -
Brendan Gallagher
-
Joshua Ferraro