3.4.4 Perl upgrade/rebuilding perl-modules
I upgraded my Perl (compiled a new version from source) from 5.8.8 to 5.14.1, because evidently Koha 3.4.4 needs a newer version of Perl than 5.8.8. Now I'm having problems getting some of the required CPAN modules to install. First of all: HTTP::OAI wants a newer version of XML::SAX::Base. I have version 1.02, while HTTP::OAI wants 1.04. However, when I try to upgrade it using CPAN, all I get is a message saying: "XML::SAX::Base is up to date (1.02)." So, no newer version available on CPAN? Secondly: PDF::Reuse::Barcode wants Barcode::Code128, which it tries to automatically install. However the installation fails (it fails if I try the install Barcode::Code128 manually too): Going to read '/root/.cpan/Metadata' Database was generated on Thu, 08 Sep 2011 09:28:48 GMT Running install for module 'Barcode::Code128' Running make for W/WR/WRW/Barcode-Code128-2.01.tar.gz Checksum for /root/.cpan/sources/authors/id/W/WR/WRW/Barcode-Code128-2.01.tar.gz ok CPAN.pm: Going to build W/WR/WRW/Barcode-Code128-2.01.tar.gz Checking if your kit is complete... Looks good Writing Makefile for Barcode::Code128 Writing MYMETA.yml cp lib/Barcode/Code128.pm blib/lib/Barcode/Code128.pm Manifying blib/man3/Barcode::Code128.3 WRW/Barcode-Code128-2.01.tar.gz /usr/bin/make -- OK Running make test PERL_DL_NONLAZY=1 /usr/lib/perl5/perl-5.14.1/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/barcode.t .. ok t/gif.t ...... skipped: (no reason given) t/png.t ...... skipped: (no reason given) Test Summary Report ------------------- t/gif.t (Wstat: 0 Tests: 1 Failed: 1) Failed test: 1 Parse errors: Bad plan. You planned 0 tests but ran 1. t/png.t (Wstat: 0 Tests: 1 Failed: 1) Failed test: 1 Parse errors: Bad plan. You planned 0 tests but ran 1. Files=3, Tests=4, 0 wallclock secs ( 0.05 usr 0.00 sys + 0.04 cusr 0.01 csys = 0.10 CPU) Result: FAIL Failed 2/3 test programs. 2/4 subtests failed. make: *** [test_dynamic] Error 255 WRW/Barcode-Code128-2.01.tar.gz /usr/bin/make test -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports WRW/Barcode-Code128-2.01.tar.gz Running make install make test had returned bad status, won't install without force Thirdly, the installtion of Schedule::At fails: Going to read '/root/.cpan/Metadata' Database was generated on Thu, 08 Sep 2011 09:28:48 GMT Running install for module 'Schedule::At' Running make for J/JO/JOSERODR/Schedule-At-1.13.tar.gz Checksum for /root/.cpan/sources/authors/id/J/JO/JOSERODR/Schedule-At-1.13.tar.gz ok CPAN.pm: Going to build J/JO/JOSERODR/Schedule-At-1.13.tar.gz Checking if your kit is complete... Looks good Writing Makefile for Schedule::At Writing MYMETA.yml and MYMETA.json cp At.pm blib/lib/Schedule/At.pm Manifying blib/man3/Schedule::At.3 JOSERODR/Schedule-At-1.13.tar.gz /usr/bin/make -- OK Running make test PERL_DL_NONLAZY=1 /usr/lib/perl5/perl-5.14.1/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/t1.t .. 1/9 # Failed test 2 in t/t1.t at line 45 # t/t1.t line 45 is: ok(!$rv && ((scalar(keys %beforeJobs)+1) == scalar(keys %afterJobs))); # Failed test 3 in t/t1.t at line 48 # t/t1.t line 48 is: ok(%atJobs); # Test 4 got: <UNDEF> (t/t1.t at line 51) # Expected: "/thisIsACommand/" # t/t1.t line 51 is: ok($content, '/thisIsACommand/'); # Test 6 got: "" (t/t1.t at line 73) # Expected: "/^(_TEST_tag1)+$/" # t/t1.t line 73 is: ok(join('', map { $_->{TAG} } values %tag1Jobs), '/^(_TEST_tag1)+$/'); # Test 7 got: <UNDEF> (t/t1.t at line 76) # Expected: "/testCMD2/" # t/t1.t line 76 is: ok($content2, '/testCMD2/'); # Test 8 got: <UNDEF> (t/t1.t at line 77) # Expected: "/testCMD3/" # t/t1.t line 77 is: ok($content2, '/testCMD3/'); t/t1.t .. Failed 6/9 subtests Test Summary Report ------------------- t/t1.t (Wstat: 0 Tests: 9 Failed: 6) Failed tests: 2-4, 6-8 Files=1, Tests=9, 0 wallclock secs ( 0.03 usr 0.01 sys + 0.04 cusr 0.07 csys = 0.15 CPU) Result: FAIL Failed 1/1 test programs. 6/9 subtests failed. make: *** [test_dynamic] Error 255 JOSERODR/Schedule-At-1.13.tar.gz /usr/bin/make test -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports JOSERODR/Schedule-At-1.13.tar.gz Running make install make test had returned bad status, won't install without force I tried installing ExtUtils::Command::MM, which went ok, but didn't help any. -- View this message in context: http://koha.1045719.n5.nabble.com/3-4-4-Perl-upgrade-rebuilding-perl-modules... Sent from the Koha - Discuss mailing list archive at Nabble.com.
Really nobody has an idea on how to fix this? Thu, 8 Sep 2011 08:08:00 -0700 (PDT) Perch kirjoitti:
I upgraded my Perl (compiled a new version from source) from 5.8.8 to 5.14.1, because evidently Koha 3.4.4 needs a newer version of Perl than 5.8.8. Now I'm having problems getting some of the required CPAN modules to install. First of all:
HTTP::OAI wants a newer version of XML::SAX::Base. I have version 1.02, while HTTP::OAI wants 1.04. However, when I try to upgrade it using CPAN, all I get is a message saying: "XML::SAX::Base is up to date (1.02)." So, no newer version available on CPAN?
Secondly: PDF::Reuse::Barcode wants Barcode::Code128, which it tries to automatically install. However the installation fails (it fails if I try the install Barcode::Code128 manually too):
Going to read '/root/.cpan/Metadata' Database was generated on Thu, 08 Sep 2011 09:28:48 GMT Running install for module 'Barcode::Code128' Running make for W/WR/WRW/Barcode-Code128-2.01.tar.gz Checksum for /root/.cpan/sources/authors/id/W/WR/WRW/Barcode-Code128-2.01.tar.gz ok
CPAN.pm: Going to build W/WR/WRW/Barcode-Code128-2.01.tar.gz
Checking if your kit is complete... Looks good Writing Makefile for Barcode::Code128 Writing MYMETA.yml cp lib/Barcode/Code128.pm blib/lib/Barcode/Code128.pm Manifying blib/man3/Barcode::Code128.3 WRW/Barcode-Code128-2.01.tar.gz /usr/bin/make -- OK Running make test PERL_DL_NONLAZY=1 /usr/lib/perl5/perl-5.14.1/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/barcode.t .. ok t/gif.t ...... skipped: (no reason given) t/png.t ...... skipped: (no reason given)
Test Summary Report ------------------- t/gif.t (Wstat: 0 Tests: 1 Failed: 1) Failed test: 1 Parse errors: Bad plan. You planned 0 tests but ran 1. t/png.t (Wstat: 0 Tests: 1 Failed: 1) Failed test: 1 Parse errors: Bad plan. You planned 0 tests but ran 1. Files=3, Tests=4, 0 wallclock secs ( 0.05 usr 0.00 sys + 0.04 cusr 0.01 csys = 0.10 CPU) Result: FAIL Failed 2/3 test programs. 2/4 subtests failed. make: *** [test_dynamic] Error 255 WRW/Barcode-Code128-2.01.tar.gz /usr/bin/make test -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports WRW/Barcode-Code128-2.01.tar.gz Running make install make test had returned bad status, won't install without force
Thirdly, the installtion of Schedule::At fails:
Going to read '/root/.cpan/Metadata' Database was generated on Thu, 08 Sep 2011 09:28:48 GMT Running install for module 'Schedule::At' Running make for J/JO/JOSERODR/Schedule-At-1.13.tar.gz Checksum for /root/.cpan/sources/authors/id/J/JO/JOSERODR/Schedule-At-1.13.tar.gz ok
CPAN.pm: Going to build J/JO/JOSERODR/Schedule-At-1.13.tar.gz
Checking if your kit is complete... Looks good Writing Makefile for Schedule::At Writing MYMETA.yml and MYMETA.json cp At.pm blib/lib/Schedule/At.pm Manifying blib/man3/Schedule::At.3 JOSERODR/Schedule-At-1.13.tar.gz /usr/bin/make -- OK Running make test PERL_DL_NONLAZY=1 /usr/lib/perl5/perl-5.14.1/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/t1.t .. 1/9 # Failed test 2 in t/t1.t at line 45 # t/t1.t line 45 is: ok(!$rv && ((scalar(keys %beforeJobs)+1) == scalar(keys %afterJobs))); # Failed test 3 in t/t1.t at line 48 # t/t1.t line 48 is: ok(%atJobs); # Test 4 got: <UNDEF> (t/t1.t at line 51) # Expected: "/thisIsACommand/" # t/t1.t line 51 is: ok($content, '/thisIsACommand/'); # Test 6 got: "" (t/t1.t at line 73) # Expected: "/^(_TEST_tag1)+$/" # t/t1.t line 73 is: ok(join('', map { $_->{TAG} } values %tag1Jobs), '/^(_TEST_tag1)+$/'); # Test 7 got: <UNDEF> (t/t1.t at line 76) # Expected: "/testCMD2/" # t/t1.t line 76 is: ok($content2, '/testCMD2/'); # Test 8 got: <UNDEF> (t/t1.t at line 77) # Expected: "/testCMD3/" # t/t1.t line 77 is: ok($content2, '/testCMD3/'); t/t1.t .. Failed 6/9 subtests
Test Summary Report ------------------- t/t1.t (Wstat: 0 Tests: 9 Failed: 6) Failed tests: 2-4, 6-8 Files=1, Tests=9, 0 wallclock secs ( 0.03 usr 0.01 sys + 0.04 cusr 0.07 csys = 0.15 CPU) Result: FAIL Failed 1/1 test programs. 6/9 subtests failed. make: *** [test_dynamic] Error 255 JOSERODR/Schedule-At-1.13.tar.gz /usr/bin/make test -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports JOSERODR/Schedule-At-1.13.tar.gz Running make install make test had returned bad status, won't install without force
I tried installing ExtUtils::Command::MM, which went ok, but didn't help any.
-- View this message in context: http://koha.1045719.n5.nabble.com/3-4-4-Perl-upgrade-rebuilding-perl-modules... Sent from the Koha - Discuss mailing list archive at Nabble.com. _______________________________________________ Koha mailing list http://koha-community.org Koha@lists.katipo.co.nz http://lists.katipo.co.nz/mailman/listinfo/koha
-- <jp@pk.dy.fi>
On 08/09/11 16:08, Perch wrote:
Secondly: PDF::Reuse::Barcode wants Barcode::Code128, which it tries to automatically install. However the installation fails (it fails if I try the install Barcode::Code128 manually too):
Theres a bug in Barcode::Code (see the rt patch) where one of the tests fails. Doing a force install will ignore the failed test. Colin -- Colin Campbell Chief Software Engineer, PTFS Europe Limited Content Management and Library Solutions +44 (0) 845 557 5634 (phone) +44 (0) 7759 633626 (mobile) colin.campbell@ptfs-europe.com skype: colin_campbell2 http://www.ptfs-europe.com
On 08/09/11 16:08, Perch wrote:
HTTP::OAI wants a newer version of XML::SAX::Base. I have version 1.02, while HTTP::OAI wants 1.04. However, when I try to upgrade it using CPAN, all I get is a message saying: "XML::SAX::Base is up to date (1.02)." So, no newer version available on CPAN?
There is a bug related to version handling posted against XML::SAX::Base on Friday. This may be the cause of your problem, I'd try downloading 1.07 manually from cpan and building it. C. -- Colin Campbell Chief Software Engineer, PTFS Europe Limited Content Management and Library Solutions +44 (0) 845 557 5634 (phone) +44 (0) 7759 633626 (mobile) colin.campbell@ptfs-europe.com skype: colin_campbell2 http://www.ptfs-europe.com
Ok, great :) Now I've got all except for Schedule::At installed. Any ideas on that? I Still get this: Going to read '/root/.cpan/Metadata' Database was generated on Tue, 13 Sep 2011 01:49:42 GMT Running install for module 'Schedule::At' Running make for J/JO/JOSERODR/Schedule-At-1.13.tar.gz Checksum for /root/.cpan/sources/authors/id/J/JO/JOSERODR/Schedule-At-1.13.tar.gz ok CPAN.pm: Going to build J/JO/JOSERODR/Schedule-At-1.13.tar.gz Checking if your kit is complete... Looks good Writing Makefile for Schedule::At Writing MYMETA.yml and MYMETA.json cp At.pm blib/lib/Schedule/At.pm Manifying blib/man3/Schedule::At.3 JOSERODR/Schedule-At-1.13.tar.gz /usr/bin/make -- OK Running make test PERL_DL_NONLAZY=1 /usr/lib/perl5/perl-5.14.1/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/t1.t .. 1/9 # Failed test 2 in t/t1.t at line 45 # t/t1.t line 45 is: ok(!$rv && ((scalar(keys %beforeJobs)+1) == scalar(keys %afterJobs))); # Failed test 3 in t/t1.t at line 48 # t/t1.t line 48 is: ok(%atJobs); # Test 4 got: <UNDEF> (t/t1.t at line 51) # Expected: "/thisIsACommand/" # t/t1.t line 51 is: ok($content, '/thisIsACommand/'); # Test 6 got: "" (t/t1.t at line 73) # Expected: "/^(_TEST_tag1)+$/" # t/t1.t line 73 is: ok(join('', map { $_->{TAG} } values %tag1Jobs), '/^(_TEST_tag1)+$/'); # Test 7 got: <UNDEF> (t/t1.t at line 76) # Expected: "/testCMD2/" # t/t1.t line 76 is: ok($content2, '/testCMD2/'); # Test 8 got: <UNDEF> (t/t1.t at line 77) # Expected: "/testCMD3/" # t/t1.t line 77 is: ok($content2, '/testCMD3/'); t/t1.t .. Failed 6/9 subtests Test Summary Report ------------------- t/t1.t (Wstat: 0 Tests: 9 Failed: 6) Failed tests: 2-4, 6-8 Files=1, Tests=9, 0 wallclock secs ( 0.03 usr 0.00 sys + 0.06 cusr 0.03 csys = 0.12 CPU) Result: FAIL Failed 1/1 test programs. 6/9 subtests failed. make: *** [test_dynamic] Error 255 JOSERODR/Schedule-At-1.13.tar.gz /usr/bin/make test -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports JOSERODR/Schedule-At-1.13.tar.gz Running make install make test had returned bad status, won't install without force -- <jp@pk.dy.fi>
On 2011-09-13, at 11:17 PM, jp@pk.dy.fi wrote:
Ok, great :) Now I've got all except for Schedule::At installed. Any ideas on that? I Still get this:
probably a question for the koha-devel list... you need to install 'at' first? # sudo apt-get install at http://packages.debian.org/squeeze/at
participants (4)
-
Colin Campbell -
jp＠pk.dy.fi -
Mason James -
Perch