Hi Ian,   Thanks a lot for your advice. It does work, but I have to delete the yml file also, then run cpan install again. Now, I run the depedencies test for koha-3.02.01   Module Name                                 Current Version                       Required Version         Module Required -------------------------------------------------------------------------------------------------------------------------- Graphics::Magick                            1.2.5 *                               1.3.5                    No -------------------------------------------------------------------------------------------------------------------------- Total modules reported: 1                                                     * Module is missing or requires an upgrade.     It seems that Magick cannot be installed through cpan, cause I get the error said   Warning: Cannot install Graphics::Magick, don't know what it is.   However, the dependencies said that this module is not required. Not sure I get the right message here. Thanks a lot again   Ann --- On Sat, 8/1/11, Ian Walls <ian.walls@bywatersolutions.com> wrote: From: Ian Walls <ian.walls@bywatersolutions.com> Subject: Re: [Koha] Koha upgrade to 3.2.1 issue with DBD::Sqlite2 and PDF::API2::Simple To: "Randall Rowe" <r.rowe@lincolnlibraries.org> Cc: "peace pear" <nemo3407@yahoo.com>, koha@lists.katipo.co.nz Received: Saturday, 8 January, 2011, 3:46 AM If you've attempted to install PDF::API2::Simple from CPAN before installing Module::Install, you'll need to manually delete the previously unwrapped directory (the /root/.cpan/build/PDF-API2-Simple-1.1.4-vDfJo3 part in Randy's example).  Then, doing the "install PDF::API2::Simple" command again in CPAN should work. Hope this helps! -Ian 2011/1/7 Randall Rowe <r.rowe@lincolnlibraries.org> Hi Ann, You shouldn't have to reinstall perl.  When you do the cpan install you should see something like Running install for module 'PDF::API2::Simple' Running make for R/RE/REDTREE/PDF-API2-Simple-1.1.4u.tar.gz   Has already been unwrapped into directory /root/.cpan/build/PDF-API2-Simple-1.1.4-vDfJo3 followed by a successful install message now that Makefile completed. What new errors are you getting? Randy Rowe Lincoln City Libraries I.T. -----Original Message----- From: "Peace Pear" <nemo3407@yahoo.com> Sent 1/6/2011 7:03:25 PM To: "Randall Rowe" <r.rowe@lincolnlibraries.org> Cc: koha@lists.katipo.co.nz Subject: Re: [Koha] Koha upgrade to 3.2.1 issue with DBD::Sqlite2 and PDF::API2::Simple Hi Randall,   Yes, I did both. Do the makefile.PL and then use cpan to install but still unable to make it work. Wonder, do I need to reinstall PERL.   Ta.   Ann --- On Fri, 7/1/11, Randall Rowe <r.rowe@lincolnlibraries.org> wrote: From: Randall Rowe <r.rowe@lincolnlibraries.org> Subject: Re: [Koha] Koha upgrade to 3.2.1 issue with DBD::Sqlite2 and PDF::API2::Simple To: "peace pear" <nemo3407@yahoo.com> Cc: koha@lists.katipo.co.nz Received: Friday, 7 January, 2011, 2:18 AM Ann, Did you actually install it or just run the Makefile build? The output looks like you just ran the Makefile. You need to be sure to run cpan install PDF::API2::Simple now that the Makefile build succeeded. You're welcome :-) Randy Rowe Lincoln City Libraries I.T. (402) 441-8523 r.rowe@lincolnlibraries.org -----Original Message----- From: "Peace Pear" <nemo3407@yahoo.com> Sent 1/5/2011 7:33:39 PM To: "Randall Rowe" <r.rowe@lincolnlibraries.org> Cc: koha@lists.katipo.co.nz Subject: Re: [Koha] Koha upgrade to 3.2.1 issue with DBD::Sqlite2 and PDF::API2::Simple Thanks a lot Randy,   here are the results again after successfully installing yaml::tiny module.   Koha:~/.cpan/build/PDF-API2-Simple-1.1.4-vDfJo3 # perl Makefile.PL include /root/.cpan/build/PDF-API2-Simple-1.1.4-vDfJo3/inc/Module/Install.pm include inc/Module/Install/Metadata.pm include inc/Module/Install/Base.pm include inc/Module/Install/Makefile.pm Cannot determine perl version info from lib/PDF/API2/Simple.pm Cannot determine author info from lib/PDF/API2/Simple.pm Cannot determine license info from lib/PDF/API2/Simple.pm include inc/Module/Install/AutoInstall.pm include inc/Module/Install/Include.pm include inc/Module/AutoInstall.pm *** Module::AutoInstall version 1.03 *** Checking for Perl dependencies... [Core Features] - Carp      ...loaded. (1.08) - PDF::API2 ...loaded. (2.011) *** Module::AutoInstall configuration finished. include inc/Module/Install/WriteAll.pm include inc/Module/Install/Win32.pm include inc/Module/Install/Can.pm include inc/Module/Install/Fetch.pm Writing Makefile for PDF::API2::Simple Writing META.yml   Besides, I have to do a force install for DBD:SQLite2, not sure this can affect anything.   Thanks again, Ann --- On Thu, 6/1/11, Randall Rowe <r.rowe@lincolnlibraries.org> wrote: From: Randall Rowe <r.rowe@lincolnlibraries.org> Subject: Re: [Koha] Koha upgrade to 3.2.1 issue with DBD::Sqlite2 and PDF::API2::Simple To: "peace pear" <nemo3407@yahoo.com> Cc: koha@lists.katipo.co.nz Received: Thursday, 6 January, 2011, 10:22 AM Ann, Start by solving the first error in the list which is Can't locate YAML/Tiny.pm try installing YAML::Tiny with cpan. then try reinstalling the PDF::API2 module You're welcome. Randy Rowe Lincoln City Libraries I.T. -----Original Message----- From: "Peace Pear" <nemo3407@yahoo.com> Sent 1/5/2011 3:17:34 PM To: "Randall Rowe" <r.rowe@lincolnlibraries.org> Cc: koha@lists.katipo.co.nz Subject: Re: [Koha] Koha upgrade to 3.2.1 issue with DBD::Sqlite2 and PDF::API2::Simple Thanks Randall for looking at this.   I did what you said, then here are more detais:   Koha:~/.cpan/build/PDF-API2-Simple-1.1.4-vDfJo3 # perl Makefile.PL include /root/.cpan/build/PDF-API2-Simple-1.1.4-vDfJo3/inc/Module/Install.pm Can't locate YAML/Tiny.pm in @INC (@INC contains: inc /usr/webpages/koha/lib /usr/lib/perl5/5.10.0/x86_64-linux-thread-multi /usr/lib/perl5/5.10.0 /usr/lib/perl5/site_perl/5.10.0/x86_64-linux-thread-multi /usr/lib/perl5/site_perl/5.10.0 /usr/lib/perl5/vendor_perl/5.10.0/x86_64-linux-thread-multi /usr/lib/perl5/vendor_perl/5.10.0 /usr/lib/perl5/vendor_perl .) at /usr/lib/perl5/site_perl/5.10.0/Module/Install/Admin/Metadata.pm line 4. BEGIN failed--compilation aborted at /usr/lib/perl5/site_perl/5.10.0/Module/Install/Admin/Metadata.pm line 4. Compilation failed in require at inc/Module/Install.pm line 307. include inc/Module/Install/Metadata.pm include inc/Module/Install/Base.pm include inc/Module/Install/Makefile.pm Cannot determine perl version info from lib/PDF/API2/Simple.pm Cannot determine author info from lib/PDF/API2/Simple.pm Cannot determine license info from lib/PDF/API2/Simple.pm include inc/Module/Install/AutoInstall.pm include inc/Module/Install/Include.pm include inc/Module/AutoInstall.pm *** Module::AutoInstall version 1.03 *** Checking for Perl dependencies... [Core Features] - Carp      ...loaded. (1.08) - PDF::API2 ...loaded. (2.011) *** Module::AutoInstall configuration finished. include inc/Module/Install/WriteAll.pm include inc/Module/Install/Win32.pm include inc/Module/Install/Can.pm include inc/Module/Install/Fetch.pm Checking if your kit is complete... Looks good Writing Makefile for PDF::API2::Simple Cannot find an extension with method 'write_meta' at /usr/lib/perl5/site_perl/5.10.0/Module/Install/Admin.pm line 186. Thanks again, Ann --- On Thu, 6/1/11, Randall Rowe <r.rowe@lincolnlibraries.org> wrote: From: Randall Rowe <r.rowe@lincolnlibraries.org> Subject: Re: [Koha] Koha upgrade to 3.2.1 issue with DBD::Sqlite2 and PDF::API2::Simple To: "Peace Pear" <nemo3407@yahoo.com> Received: Thursday, 6 January, 2011, 8:49 AM

From a command prompt/ terminal as root run

cd /root/.cpan/build/PDF-API2-Simple-1.1.4-vDfJo3 /usr/bin/perl Makefile.PL and see what errors you get back. The cpan interface tends to eat these. That package is probably looking for another build package that is not installed. Randy Rowe Lincoln City Libraries I.T. -----Original Message----- From: "Peace Pear" <nemo3407@yahoo.com> Sent 1/4/2011 7:42:57 PM To: koha@lists.katipo.co.nz Subject: [Koha] Koha upgrade to 3.2.1 issue with DBD::Sqlite2 and PDF::API2::Simple Hi there,   I am Ann. I am trying to upgrade from Koha 3.00.05 to 3.02.01, but keep get the message for lacking 3 prerequitesite: DBD::SQLite2 (I have the SQLite but not Sqlite2, trying to find the SQlite 2 for opensuse but still can't) Graphics::Magick (the same issue, I used yast2 to install but just found the version 1.2.5 not the 1.3.5 as requried) PDF::API2::Simple (looks like it is there, but keep bumping to errors:   Running install for module 'PDF::API2::Simple' Running make for R/RE/REDTREE/PDF-API2-Simple-1.1.4u.tar.gz   Has already been unwrapped into directory /root/.cpan/build/PDF-API2-Simple-1.1.4-vDfJo3   '/usr/bin/perl Makefile.PL' returned status 2304, won't make Running make test   Make had some problems, won't test Running make install   Make had some problems, won't install   Does anyone have any ideas how to get around these issues ? I search on the forum but find the solution mostly for Ubuntu not Open Suse 11.1.   Many thanks in advance, Ann   _______________________________________________ Koha mailing list http://koha-community.org Koha@lists.katipo.co.nz http://lists.katipo.co.nz/mailman/listinfo/koha       _______________________________________________ Koha mailing list  http://koha-community.org Koha@lists.katipo.co.nz http://lists.katipo.co.nz/mailman/listinfo/koha -- Ian Walls Lead Development Specialist ByWater Solutions Phone # (888) 900-8944 http://bywatersolutions.com ian.walls@bywatersolutions.com Twitter: @sekjal