After a week of trying with Z39.50, there is finally a bib record in the reservoir! However I am getting an error message that I do not know how to resolve.
From the "Biblios in reservoir" screen Click Add biblio link Click Save button and receive the following error:
Can't save this record because the following field aren't filled : []* tag 003 subfield 0 control field in tab 0 As far as I can remember I did not change the Subfield Structure for tag 003 when editing the MARC Frameworks Structures. How can this situation be resolved? Rachel Hollis, librarian Stevens-Henager College, Boise Idaho Campus ________________________________ This message is for the designated recipient only and may contain privileged, proprietary, or otherwise private information. If you have received it in error, please notify the sender immediately and delete the original. Any other use of the email by you is prohibited.
On Fri, Dec 5, 2008 at 3:19 PM, Rachel Hollis <Rachel.Hollis@stevenshenager.edu> wrote:
After a week of trying with Z39.50, there is finally a bib record in the reservoir! However I am getting an error message that I do not know how to resolve. From the "Biblios in reservoir" screen Click Add biblio link Click Save button and receive the following error:
Can't save this record because the following field aren't filled : []* tag 003 subfield 0 control field in tab 0
As far as I can remember I did not change the Subfield Structure for tag 003 when editing the MARC Frameworks Structures. How can this situation be resolved? 003 is set to be a required field in the default frameworks, so you'll need to either put a value in 003, or change your frameworks to specify that it's not a required field.
Cheers, -- Joshua Ferraro SUPPORT FOR OPEN-SOURCE SOFTWARE CEO migration, training, maintenance, support LibLime Featuring Koha Open-Source ILS jmf@liblime.com |Full Demos at http://liblime.com/koha |1(888)KohaILS
On Tue, Dec 9, 2008 at 5:10 PM, Lino Tremblay <lino.tremblay@cegep-ste-foy.qc.ca> wrote:
Hello,
I have the same 003 error message too, even though my default framework 003 isn't required in my default framework (in all of them, actually). Could the problem come from elsewhere? Check your definition at the Field and Subfield level for 003 in your bibliographic framework.
Cheers, Josh
Lino
Joshua Ferraro a écrit :
On Fri, Dec 5, 2008 at 3:19 PM, Rachel Hollis <Rachel.Hollis@stevenshenager.edu> wrote:
After a week of trying with Z39.50, there is finally a bib record in the reservoir! However I am getting an error message that I do not know how to resolve. From the "Biblios in reservoir" screen Click Add biblio link Click Save button and receive the following error:
Can't save this record because the following field aren't filled : []* tag 003 subfield 0 control field in tab 0
As far as I can remember I did not change the Subfield Structure for tag 003 when editing the MARC Frameworks Structures. How can this situation be resolved?
003 is set to be a required field in the default frameworks, so you'll need to either put a value in 003, or change your frameworks to specify that it's not a required field.
Cheers,
-- Lino Tremblay, bibliothécaire Cégep de Sainte-Foy 2410, chemin Sainte-Foy Québec, Québec Canada G1V 1T3 Tél.: 418 659-6600, poste 3865 Fax: 418 659-4563
-- Joshua Ferraro SUPPORT FOR OPEN-SOURCE SOFTWARE CEO migration, training, maintenance, support LibLime Featuring Koha Open-Source ILS jmf@liblime.com |Full Demos at http://liblime.com/koha |1(888)KohaILS
Thanks Joshua, I didn't realize it was required at two levels. Seems to be ok now. Lino Joshua Ferraro a écrit :
On Tue, Dec 9, 2008 at 5:10 PM, Lino Tremblay <lino.tremblay@cegep-ste-foy.qc.ca> wrote:
Hello,
I have the same 003 error message too, even though my default framework 003 isn't required in my default framework (in all of them, actually). Could the problem come from elsewhere?
Check your definition at the Field and Subfield level for 003 in your bibliographic framework.
Cheers,
Josh
Lino
Joshua Ferraro a écrit :
On Fri, Dec 5, 2008 at 3:19 PM, Rachel Hollis <Rachel.Hollis@stevenshenager.edu> wrote:
After a week of trying with Z39.50, there is finally a bib record in the reservoir! However I am getting an error message that I do not know how to resolve. From the "Biblios in reservoir" screen Click Add biblio link Click Save button and receive the following error:
Can't save this record because the following field aren't filled : []* tag 003 subfield 0 control field in tab 0
As far as I can remember I did not change the Subfield Structure for tag 003 when editing the MARC Frameworks Structures. How can this situation be resolved?
003 is set to be a required field in the default frameworks, so you'll need to either put a value in 003, or change your frameworks to specify that it's not a required field.
Cheers,
-- Lino Tremblay, bibliothécaire Cégep de Sainte-Foy 2410, chemin Sainte-Foy Québec, Québec Canada G1V 1T3 Tél.: 418 659-6600, poste 3865 Fax: 418 659-4563
-- Lino Tremblay, bibliothécaire Cégep de Sainte-Foy 2410, chemin Sainte-Foy Québec, Québec Canada G1V 1T3 Tél.: 418 659-6600, poste 3865 Fax: 418 659-4563
Hi Rachel,
After a week of trying with Z39.50, there is finally a bib record in the reservoir!
Wow, why did it take that long? Hope you've looked at the excellent tutorial by the one and only Brooke Johnson at http://www.pakban.net/brooke/tut/rev.html also, i am hoping to release a tutorial soon on one way of searching for a whole lot of MARC records at one go using the MarcEdit z39.50 client. Thanks and regards, krishnan mani Pune, India --- On Sat, 6/12/08, Rachel Hollis <Rachel.Hollis@stevenshenager.edu> wrote: From: Rachel Hollis <Rachel.Hollis@stevenshenager.edu> Subject: [Koha] add biblio error on 003 To: "Koha@lists.katipo.co.nz" <Koha@lists.katipo.co.nz> Date: Saturday, 6 December, 2008, 1:49 AM After a week of trying with Z39.50, there is finally a bib record in the reservoir! However I am getting an error message that I do not know how to resolve.
From the “Biblios in reservoir” screen Click Add biblio link Click Save button and receive the following error: Can't save this record because the following field aren't filled : []* tag 003 subfield 0 control field in tab 0 As far as I can remember I did not change the Subfield Structure for tag 003 when editing the MARC Frameworks Structures. How can this situation be resolved? Rachel Hollis, librarian Stevens-Henager College, Boise Idaho Campus
________________________________ This message is for the designated recipient only and may contain privileged, proprietary, or otherwise private information. If you have received it in error, please notify the sender immediately and delete the original. Any other use of the email by you is prohibited. _______________________________________________ Koha mailing list Koha@lists.katipo.co.nz http://lists.katipo.co.nz/mailman/listinfo/koha Be the first one to try the new Messenger 9 Beta! Go to http://in.messenger.yahoo.com/win/
participants (4)
-
Joshua Ferraro -
Krishnan Mani -
Lino Tremblay -
Rachel Hollis